2012 Acura TSX navigation system

11
1\f
R E V E R S E T I L T D O O R M I R R O R
H o w I t W o r k s
When you shift into Reverse (R)\b the passenger’s outside door mirror tilts down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
• To tilt the passenger’s door mirror\b movethe
mirror selector switch
to the right (R)
position when in
Reverse.
• To turn the feature off\b move the switch
to the middle or left
(L) position.
R E A R V I E W C A M E R A( T e c h n o l o g y P a c k a g e )
For added convenience\b the area behind your vehicle is displayed to help
you navigate while backing up.
• When you shift into Reverse\b a real-time image of
the area behind your vehicle is shown in the
navigation display.
• Yellow parking guidelines also appear to help you judge distance.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of Reverse.
H o w I t W o r k s
H O M E L I N K ®
Press and hold the button on the
remote and the HomeLin kbutton at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2seconds.
Does the LED blink at a faster ratewithin 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, pressand
hold the programmed HomeLink
button for 2 seconds.a
Press and hold theprogrammed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be programmed to
operate up to three remote-controlled devices around your home\b such as garage
doors\b lighting\b or home security systems.
If you have any problems programming HomeLink\b see the owner’s manual
included with the device you are trying to program\b call HomeLink at
(8\f\f) 355-3515\b or visit www.homelink.com.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f2\b PM Page 7

V O I C E R E C O G N I T I O N
F u n c t i o n s b y V o i c e C o m m a n d
To keep your eyes on the road and hands on the wheel\b use voice commands for
hands-free calling\b navigation\b audio\b climate control\b and AcuraLink functions. For a
full list of commands\b say“Info” and“Voice Help.”
Control up to five different systems with the steering wheel buttons and the
ceiling microphone.
1\f 11
Technology Package shown
15
14
B L U E T O O T H® H A N D S F R E E L I N K ®p. 25
A C U R A L I N K *p. 24
A U D I O *p. 19
C L I M A T E *p. 19
N A V I G A T I O N *p. 2\f
* Voice commands for these systems are available on Technology Package only.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f27 PM Page 9

U s i n g t h e V o i c e C o m m a n d S y s t e m
HFL Talk button:Give HFL
commands and answer
incoming calls.
HFL \fack button: Cancel a
command and end or decline
a call.
B a s e m o d e l
T e c h n o l o g y P a c k a g e
17
16
PickUp button:
Answer an
incoming call\b or go directly to the
Cellular Phone screen.
Talk button: Give HFL\b navigation\b
audio\b climate control\b or
AcuraLink commands.
\fack button: Cancel a command
and return to the previous screen.
HangUp button: End a call or
decline a call.
V o i c e C o m m a n d T i p s
• To hear a list of available commands at any time\b press and release the
Talk button\b then say“Help.”
• When using the Talk button\b wait for a beep\b then give a command.
• When the Talk button is pressed\b all available voice commands are
highlighted in blue.
• Speak in a clear\b natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
C o m m o n l y U s e d V o i c e C o m m a n d s
Press and release the Talk button before you give a command.
L o o k f o r R e s t a u r a n t s
N e a r Y o u r L o c a t i o n
Say a command like “Display
restaurants” to see restaurant icons
appear on the map.
A d j u s t V e h i c l e ’ s C l i m a t e
S e t t i n g
Say a command like “Air
conditioner on” and“Fan speed 4”
to achieve a comfortable climate
setting.
M a k e A u d i o S e l e c t i o n s
Say a command like “Radio 97.\f
FM” or“CD play track 5” to select
that station or song.
G e t E s t i m a t e d D i s t a n c e
t o D e s t i n a t i o n
After a destination is entered\b say
“How far to destination?” to hear
the remaining distance.
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f27 PM Page 10

N A V I G A T I O N( T e c h n o l o g y P a c k a g e )
Real-time navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
21
2\f
U s i n g t h e F i n d N e a r e s t C o m m a n dE n t e r i n g a D e s t i n a t i o n A d d r e s s U s i n g V o i c e C o n t r o l
Set a destination using a street address. For other destination options\b see
your Navigation Manual.
Press and release the Talk button before you give a command. Find a nearby point of interest\b such as a gas station\b movie theater\b
restaurant\b etc.Press and release the Talk button before you give a command.
1. Say “Find nearest ATM.”
2. A list of the nearest ATMs in
your area is displayed by
shortest distance to
destination.
3. Say the number next to the
destination you want.
4. The system calculates and displays the route.
1.Say “Display menu. ”Say
“Address.”
2. Say “Street,” fhensaythe
street name on the next
screen. Do not include the
direction (N\b S\b E\b W) or type
(St.\b Ave.\b Blvd.\b etc.).
3. A list of street names appears. Say the number next to the
street you want. 4.
Say the entire street address
number. For example\b “\f\b2\b3\b
4.” If necessary\b say“OK” to
proceed.
5. If the street address is in more than one city\b a list of city
names appears. Saythe
number next to the city you
want.
6. The system displays the “Calculate route to” screen.
Say “OK” to set the route.
Calculated Route
Distance to go
Direction of destination
Current vehicle
location
M a p S c r e e n
L e g e n d
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f28 PM Page 12

M a k i n g a C a l l
Press and release the HFL Talk button before you give a command.
1. Say “Call” and the phone
number.
2. Say “Call” or“Dial” to
begin the call. 3. The call is connected and
heard through the
speakers.
B L \b E T O O T H®H A N D S F R E E L I N K®( T e c h n o l o g y P a c k a g e )
Place and receive phone calls through your vehicle's navigation and audio systems.
Visitwww.acura.com/handsfreelink to check if your phone is compatible.
27
26
01233456789IN USE
CALLINGP a i r i n g Y o u r P h o n e
Press and release the Talk button before you give a command.
2. Make sure your phone is in Discovery mode. Searchfor
HandsFreeLink from your
phone\b and selectit when it
appears. 3. When your phone prompts
you\b enter the 4-digit pass-
key from HFL.
4. Follow your phone’s prompts
and connect to HFL.
Use this pairing method when no phone has ever been paired to the system.
You can only pair your Bluetooth-compatible phone when the vehicle is
stopped.
U s i n g H F L
PickUp button: Answer an
incoming call\b or go directly to the
Cellular Phone screen.
Talk button: Give HFL commands.
\fack button: Cancel a command
and return to the previous screen.
HangUp button: End a call or
decline a call.
1. Press the Pick-Up button to
access the Cellular Phone
screen. A prompt appears
asking if you want to add a
phone. Say“Yes.”
R e c e i v i n g a C a l l
1. A notification is heard\b and
“INCOMING CALL” and the
phone number appear on
the MID.
2. Press the HFL Talk button to
accept the call.3. Press the HFL Back button
to decline or end the call.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f29 PM Page 15

31
3\f
B L \b E T O O T H®
A U D I O
Play audio files from your compatible phone through your vehicle’s audio system. Visit
www.acura.com/handsfreelink to check if this feature is available on your phone.
1. Make sure your phone is on and paired to HandsFreeLink (see
page 2\b or 27).
Notes:
• Make sure the volume on your phone is properly adjusted.
• You may need to enable additional Bluetooth settings on your phone for playback. 4.
Press () or () on the audio
control panel to change tracks\b
or press (+) or () on the remote
audio controls.
2. Press AUX until “Bluetooth Audio”
appears.
3. From your phone\b openthe
desired audio player or app and
begin playing. Sound is
redirected to the audio system.
P l a y i n gBluet\f\fthA u d i o F i l e s
* not supported on all phones
R e c e i v i n g a C a l l
1. When you receive an incoming call\b you hear a notification and see one of the following pop-up messages:
3.Press the Hang-Up button
to end or decline the call.2. Press the Pick-Up button to
accept the call.
On the audio screen
On the navigation
map screen
On the Cellular
Phone screen
Press and release the Talk button before you give a command.
U s i n g S p e e d D i a l a n d V o i c e T a g s
Note: See your Owner’s Manual for instructions on storing speed
dial entries and accompanying voice tags. 3. The call is connected and
heard through the
speakers.
2.Say “Call” and the number of
the entry. For example\b “Call
one.” For the complete list of
speed dial entries\b say“More
speed dial.” If a speed dial has a stored
voice tag\b say“Call” and
the voice tag name. For
example\b “Call Mary.”
1.
Press the Pick-Up button to
access the Cellular Phone
screen.
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f31 PM Page 17

35
34
P l a y i n g A u d i o F i l e s U s i n g V o i c e C o m m a n d s ( c o n t i n u e d )
Press and release the Talk button before you give a command.
U s i n g t h e “ L i s t ” C o m m a n d
The system
provides
voice
feedback
and lists
possible
matches.
A list of tracks
from the
selected artist
displays.
Say
"iPod search"
or "HDD search."
Say "List" and
one of the
options on the
Search Mode
screen. For
example\b say
"List Artist XYZ."
Say the
number of
your selection.
For example\b
say "One."
The system
plays the
selection and
returns to the
Search Mode
screen. Say
the
number of
the artist.
For
example\b
say "Four."
if exact
matchfound if exact
match
not found
S O N G B Y V O I C ET M( S B V )( T e c h n o l o g y P a c k a g e )
Play songs from your iPod and HDD from most navigation/audio screens by using
simple voice commands.
P l a y i n g A u d i o F i l e s U s i n g V o i c e C o m m a n d s
U s i n g t h e “ P l a y ” C o m m a n d
Press and release the Talk button before you give a command.
The system
provides voice
feedback and
lists possible
matches.
The system
plays the
selection
and returns
to the Search
Mode
screen.
Say "iPod
search" or
"HDD search."
Say "Play" and
one of the
options on the
Search Mode
screen. For
example\b say
"Play Artist
XYZ."
Saythe
number of the
corresponding
selection you
wish to play.
For example\b
say "Four."
if exact
matchfound if exact
match
not found
12 TSX 5D ATG\fATG_NEW STYLE \b/1/2011 2\f33 PM Page 19