2011 TOYOTA URBAN CRUISER engine

498 6-1. Specifications
URBAN CRUISER_EE (OM52C21E)
Fuel
Gasoline engine
Diesel engine
Fuel typeEU area:
Unleaded gasoline conforming to European
standard EN228 only
Except EU area:
Unleaded gasoline only
Research octane
number95 or higher
Fuel tank capacity
(reference)42 L (11.1 gal., 9.2 lmp.gal.)
Fuel typeEU area:
Diesel fuel conforming to European
standard EN590
Except EU area:
Diesel fuel that contains 50 ppm or less of
sulfur
Cetane number 48 or higher
Fuel tank capacity
(reference)42 L (11.1 gal., 9.2 lmp.gal.)

499 6-1. Specifications
6
Vehicle specifications
URBAN CRUISER_EE (OM52C21E)
Lubrication system
Gasoline engine
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota rec-
ommends the use of approved “Toyota Genuine Motor Oil”. Another
motor oil of matching quality can also be used.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or
ILSAC multigrade engine oil
15W-40 and 20W-50:
API grade SL or SM multigrade engine oil
Oil capacity
(Drain and refill —
reference)
With filter
Without filter3.4 L (3.6 qt., 3.0 Imp.qt.)
3.2 L (3.4 qt., 2.8 Imp.qt.)

500 6-1. Specifications
URBAN CRUISER_EE (OM52C21E)Recommended viscosity (SAE):
SAE 0W-20 is filled into your
Toyota vehicle at manufacturing,
and the best choice for good fuel
economy and good starting in
cold weather.
If SAE 0W-20 oil is not available,
SAE 5W-30 oil may be used.
However, it should be replaced
with SAE 0W-20 at the next oil
change.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures, the
engine may become difficult to
start, so SAE 5W-30 or lower vis-
cosity engine oil is recom-
mended.
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil when
the oil is at high temperature. An oil with a higher viscosity (one with a
higher value) may be better suited if the vehicle is operated at high
speeds, or under extreme load conditions.
Temperature range anticipated before
next oil change.
Preferred

502 6-1. Specifications
URBAN CRUISER_EE (OM52C21E)Diesel engine
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota rec-
ommends the use of approved “Toyota Genuine Motor Oil”. Another
motor oil of matching quality can also be used.
Oil grade: ACEA C2
Oil capacity
(Drain and refill —
reference)
With filter
Without filter3.9 L (4.1 qt., 3.4 Imp.qt.)
3.5 L (3.7 qt., 3.1 Imp.qt.)
NOTICE
Using engine oil other than ACEA C2 may damage the catalytic converter.

503 6-1. Specifications
6
Vehicle specifications
URBAN CRUISER_EE (OM52C21E)Recommended viscosity (SAE):
SAE 0W-30 is filled into your
Toyota vehicle at manufacturing,
and the best choice for good fuel
economy and good starting in
cold weather.
Oil viscosity (0W-30 is explained here as an example):
• The 0W in 0W-30 indicates the characteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 30 in 0W-30 indicates the viscosity characteristic of the oil when
the oil is at high temperature. An oil with a higher viscosity (one with a
higher value) may be better suited if the vehicle is operated at high
speeds, or under extreme load conditions.
Temperature range anticipated before
next oil change.
Preferred

504 6-1. Specifications
URBAN CRUISER_EE (OM52C21E)
Cooling system
Capacity
(reference)
Gasoline
engineWith exhaust heat4.9 L
(5.2 qt., 4.3 lmp.qt.)
Without exhaust heat4.1 L
(4.3 qt., 3.6 lmp.qt.)
Diesel
engine
With power heater
2WD models
4WD models5.0 L
(5.3 qt., 4.4 lmp.qt.)
5.3 L
(5.6 qt., 4.7 lmp.qt.)
Without power heater
2WD models
4WD models4.7 L
(5.0 qt., 4.1 lmp.qt.)
5.0 L
(5.3 qt., 4.4 lmp.qt.)
Coolant typeUse either of the follow-
ing.
• “Toyota Super Long Life
Coolant”
• Similar high-quality eth-
ylene glycol-based non-
silicate, non-amine,
non-nitrite, and non-
borate coolant with
long-life hybrid organic
acid technology
Do not use plain water
alone.

505 6-1. Specifications
6
Vehicle specifications
URBAN CRUISER_EE (OM52C21E)
Ignition system (gasoline engine)
Electrical system
Spark plug
Make DENSO SC20HR11
Gap 1.1 mm (0.043 in.)
NOTICE
Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust spark plug gap.
Battery
Specific gravity reading at
20C (68F):1.250  1.290 Fully charged
1.160  1.200 Half charged
1.060  1.100 Discharged
Charging rates
Quick charge
Slow charge15 A max.
5 A max.

507 6-1. Specifications
6
Vehicle specifications
URBAN CRUISER_EE (OM52C21E)
Brakes
*1:Minimum pedal clearance when depressed with a force of 300 N (31.0 kgf,
67.4 lbf) while the engine is running
*2:Parking brake lever travel when pulled up with a force of 200 N (20.4 kgf,
45.0 lbf)
Pedal clearance*1
Left-hand drive vehicles
Right-hand drive vehicles88 mm (3.46 in.) Min.
78 mm (3.07 in.) Min.
Pedal free play 1  6 mm (0.04  0.24 in.)
Parking brake lever travel*25  8 clicks
Fluid type SAE J1703 or FMVSS No. 116 DOT 3