2011 SUBARU IMPREZA Navigation Manual

Navigation 19
Markers and Controls Displayed on Maps
Screens During Route Setting
Touch a point on the map. A crosshair (scroll mark) will appear
on the screen. Then touch a desired point on the map. The
map will scroll with the selected point at the center.(1) TimeIndicates the current time.
(2) Map orientation control Used to select either a "north up" display or "heading up" dis-
play of the map. (See Page 24.)
(3) GPS marker Shows the status of the signal from GPS satellites. When this
marker appears, your navigation system is receiving GPS sig-
nals and using them to calculat e the position of your vehicle.
(4) Screen configuration control Allows you to select a preferred display type for route guid-
ance. (See Page 43.)
(5) Map scale Used to display the map scale.
(6) Zoom-out/zoom-in control or is used to zoom out or zoom in the map.
Select or to select the map scale.
(7) Vehicle marker Indicates the current position and direction of your vehicle.
(4)
Scroll the map


Press button to
return to the current map
screen.
(1)
(2)
(6)
(7)
(5)
(10)
(9)
(8)
(11)
(3)
Impreza_B1962BE-A.book Page 19 Wednesday, May 7, 2008 9:01 PM

20 Navigation
Markers and Controls Displayed on Maps
(8) "Store memory point" keyStores markers on the map.
This key appears just for a few seconds after a map screen is
selected.
(9) Point of interest (POI) key Allows you to display the POI selection screen (See Page 79).
On the screen, you can program POIs to appear on a map as
markers. This key appears just for a few seconds after a map
screen is selected.
(10) Distance from current position Indicates the distance from the current position to the posi-
tion marked by .
(11) Destination/waypoint key Used to program a destination or waypoint at the position
marked by on a scroll screen.
Impreza_B1962BE-A.book Page 20 Wednesday, May 7, 2008 9:01 PM

Navigation 21
Markers and Controls Displayed on Maps
Screens During Route Guidance
(1) Distance and time to destinationIndicates the time (either appro ximate time required or time
of arrival) and the distance to the destination or a waypoint.
(2) Route A thick blue line indicates th e route you should follow.
(3) Turn guidance arrow Indicates the direction of your turn at the next intersection/
intersection as well as the distance to the intersection/inter-
section.
(4) "Repeat voice" key If this key is selected, the last voice guidance will be repeated.
(5) Current road name Shows the name of the road you are currently driving on.
(6) "Display whole route" key If this key is selected, a map co ntaining the entire route will
be displayed. (See Page 56.)
(7) Detour If this key is selected, the syst em will calculate an alternative
route that detours from the current location.
(8) "Change route" key Selecting this key displays the route option menu. Selecting a
new route option causes the system to calculate the selected
route.(3)(2)
(1)
(4)(5)
(6)
(7)
Select the screen
(5 seconds)
(8)
Impreza_B1962BE-A.book Page 21 Wednesday, May 7, 2008 9:01 PM

22 Navigation
Menu Screen Keys and Functions
The table below shows the keys displayed on the MENU screen,
the functions accessible by selecting these keys, and the pages of
this manual that describe the instructions you should follow when
using these functions.
Select to return to
the current map screen.

Navigation 23
Menu Screen Keys and Functions
PhoneBluetooth Phone page 187
Redial List page 199
Received Calls page 199
Phone Book page 201
Memory Points page 193
Bluetooth Settings page 183
Version Version page 87
VOL Volume page 18
Menu screen key Function Reference page
Impreza_B1962BE-A.book Page 23 Wednesday, May 7, 2008 9:01 PM

24 Navigation
Map Operations
Selecting Map Orientation
You can select either "heading up" or "north up" display on
the current map screen by using the following procedure.
1Select or .
If you select ("north up" display), the system rotates the
map so that north is always directly upwards on the screen. If you select
("heading up" display), the system rotates the
map so that the direction in wh ich you are heading is always
directly upwards on the screen (the red arrow points to the north).
<"Heading up" display>
<"North up" display>
Impreza_B1962BE-A.book Page 24 Wednesday, May 7, 2008 9:01 PM

Navigation 25
Map Operations
Changing Map Scale
You can increase or decrease the scale of the map using the
following procedure:
1Select or to change the map scale.
2Selecting or changes the scale as shown
below.
Impreza_B1962BE-A.book Page 25 Wednesday, May 7, 2008 9:01 PM

26 Navigation
Map Operations
NOTE• Selecting or allows you to change the map scale.
• You c an k ee p se le c t i ng o r al low s you to change the map scale.
• Selecting either of the followin g on the scale bar displayed by
selecting or allows you to change to the specified map scale.
• The scale can be displayed in Imperial or metric units. To change the units, See
Page 61.
Imperial display
Metric display 1/32 mi (mile)
50 m1/4 mi (mile)
500 m2 mi (mile)
4 km 16 mi (mile)
32 km128 mi (mile)
256 km
Current scale

Scale to be changed
Impreza_B1962BE-A.book Page 26 Wednesday, May 7, 2008 9:01 PM