2011 SKODA YETI phone

●
BALANCE - setting of the volume ratio between the left and right side;
● FADER - setting of the volume ratio between the front and the rear;
● ON VOL - Your radio stores the last volume set before switching off. If the val-
ue is higher, the volume is reduced to the value of the parameter ON VOL after
switching on the radio again.
● PDC VOL - If your vehicle has been fitted with the “Parking aid (PDC)” driver's
assistant system, the volume is automatically reduced to a pre-defined value
when the “parking aid (PDC)” is active;
● GALA - the car radio will increase the volume in response to an increase in
speed (higher figures result in a steeper increase in volume);
● LOUD - in case of low volume level, this function reinforces the range of bass
and treble frequencies. Ð
Setting the special functions –
Press the menu control button 2 for a long period of time.
– Select the individual functions of the menu with the help of the station keys.
– Set the desired value using the menu control button 2 or with the help of the
station keys.
AUX
Switching on or off the functions of the external audio source.
Setting of the input sensitivity AUX LEV:
● LEV 1 - high level, used in particular for notebooks;
● LEV 2 - middle level, used for cassettes or CD player;
● LEV 3 - low level, used for MP3 player;
PHONE
If your vehicle is equipped with a handsfree system, you can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the
vehicle.
BEEP
Switching on or off the tone signal when storing the radio stations.
ILLUM
Switch on (value 2) or switch off (value 1 ) the rear lighting of the control buttons. AF
The function alternative frequency (AF) ensures that the best receivable frequen-
cy of the selected station is automatically and precisely set. The replay of the
broadcast can be muted briefly during the search process according to the best
receivable frequency. If no alternative frequency of the set station can be found
and the station no longer offers a satisfactory quality, then please select another
station.
REG
Certain programs of the broadcasting companies are divided into regional pro-
grams at specific times. That is why in individual regions the regional programs of
a station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a

“program loss”, the unit
also accepts “related” frequencies.
● FIX - the receiver switches to a regional
“related” station, if the reception of
the current station could be interrupted;
● AUTO - the receiver can access the regional
“related” station unlimited.
BT-AUDIO
Enables a wireless transfer of MP3 data from the telephone preinstallation. Ð
Radio mode Changing the frequency band –
Press the button RADIO .
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory
levels, i.e. 3 levels for FM and 3 levels for AM. There are each 6 memory spaces
available on these levels.
Activation of the FM band
Activate the FM band by pressing the RADIO button for a long time followed by
the FM 12 button. By briefly pressing the button
RADIO , you can select between
the memory levels FM1, FM2 and FM3. 4
General information

CD player
Using the systemInserting the CD –
Press the button MEDIA , in order to select the audio source:
CD (internal CD
drive), CDC (external CD changer), AUX/MDI (external input) and BT-AUDIO
(wireless transfer of MP3 data from the telephone preinstallation).
– Carefully insert a CD into the CD case 10 until it is automatically drawn in. The
play function begins automatically. Ð
Operating the CD player Select track
–
Briefly press the rocker switch  or
 during the play function of the CD or
turn the menu control button 2 , in order to select the previous and/or the
next title.
– Press the button  or
 for fast replay of the track (reverse or forward). The
play function is continued after releasing the button.
Function SCAN
– Briefly press the menu control button 2 , in order to scroll through the CD. The
first 10 seconds of each title are played.
– In order to call up the original replayed title, press the station key CANCEL 12 .
– End the automatic finding by pressing the button OK 12 . The already replayed
title remains selected.
– If you wish to select another title, press the button SKIP 12 .
End the play function of the CD
– In order to end the play function of the CD and to activate the radio, press the
button RADIO .
Ejecting CD
– Press the button 11 , the Cd is ejected. Display of additional information (MP3 data)
Press the button
INFO , the additional information for the current title is displayed
on the display.
In the display, you can select the display of additional information via the MP3 da-
ta using the station keys 1 -
6 .
Note
● If the ejected CD is not removed, it is drawn in again for safety reasons.
● If the radio is functioning in the TP mode before changing to the CD mode, the
play function of the CD is interrupted during the traffic reports and the unit
switches over to the radio mode. After the traffic reports have ended, the unit
switches back once again to the CD mode. Ð
Selective functions in CD mode During the CD play function the following functions are displayed on the display:
RPT
Selection of the mode for repeating the title.
● OFF - Play function in continuous order;
● TRACK - repeated play function of the selected title;
● FOLDER - is a CD inserted with MP3 data, the titles are repeated from the fold-
er, which was active when starting the repeat mode.
FLD DOWN (PREV PL - for the play function of the play list)
Scroll downwards in the folders.
FLD UP (NEXT PL - for the play function of the play list)
Scroll upwards in the folders.
PLAYLIST
Play function of the playlist (folder of selected titles from individual folders, which
is stored on the CD).
BROWSE
Scroll through the entire folder structure. 6
CD player