13B-317
MR-372-J84-13B050$936.mif
V17
DIESEL INJECTION
Fault finding – Tests13B
Siemens Injection
SID301 and 304
Vdiag No.: 44-45-48-49-4D-4C
Program No.: B1 and B2
TEST 7
CONTINUED
Restart the engine and let it idle.
Refer to PR064 Coolant temperature and wait
until the temperature is above 60°C.
Refer to the parameters
PR364 Cylinder no. 1 fuel flow correction.
PR365 Cylinder no. 4 fuel flow correction.
PR405 Cylinder no. 2 fuel flow correction.
PR406 Cylinder no. 3 fuel flow correction.
Are the reference values 1 (tolerance - 0.7/+ 0.9)?
NO
If the reference values are 0.3 or 1.9,
check the engine compression.
Is the compression in order?
NO
Engine fault.
YESDisconnect the return system connections
at the injectors and close off the return
pipes so they are leak-tight (pipe and can
kit for engines1711 and 1771).
While the engine is idling, check the return
flow rate at the injector.
After 5minutes the return volume should
be between 16 ml and 30 ml per injector.
Is the return volume between this interval?
Injector OK
Contact the Techline.
NO
YES
YESReplace the
faulty injector.
Check that the
fault is not
due to the
presence of
two heat
protection
washers.
AFTER REPAIRCarry out a road test followed by a complete check with the diagnostic tool.
A
