2011 RENAULT SCENIC warning

88C-72
MR-372-J84-88C100$472.mif
V5
AIRBAGS AND PRETENSIONERS
Fault finding – Interpretation of faults
AIRBAG RC5
Vdiag: 14
88C
DF193
PRESENT
OR
STOREDPASSENGER AIRBAG LOCKING CHANGE OF STATUS
NOTESSpecial notes:
The vehicle user must deactivate or reactivate the passenger airbag using the switch
before the vehicle exceeds a speed of 0.3 mph (0.5 km/h). Above this speed,
the computer stores this fault and illuminates the instrument panel warning light.
Clear the computer fault memory.
Switch off the ignition, and wait a few seconds.
Set the locking switch to the desired setting.
Switch the ignition back on and check that the fault is no longer present.
AFTER REPAIRClear the computer fault memory. Switch off the ignition.
Carry out the check again using the diagnostic tool and, if there is no fault, unlock
the computer.
ABGRC5_V14_DF193

88C-83
MR-372-J84-88C100$590.mif
V5
88C
AIRBAGS AND PRETENSIONERS
Fault finding – Conformity check
NOTESOnly carry out this conformity check after having carried out a complete check using
the diagnostic tool.
FunctionParameter or status
checked or actionDisplay and notes Fault finding
Dialogue
diagnostic tool-Airbag RC5 P1/P2Consult ALP1
Computer
conformityLC034 Type of vehicleCheck that the computer
configuration corresponds to
the vehicle.CF215 Vehicle type
Computer/Ignition
lines configurationUsing the READ
CONFIGURATION
commandsCheck that the computer
configurations match
the actual equipment fitted to
the vehicle.Using the commands SC005
Configuration of system
components
Operation of
the warning light.
Computer
initialisation check.Ignition onThe warning light illuminates
for 3 seconds when
the ignition is switched on.None
ABGRC5_V14_CCONF
AIRBAG RC5
Vdiag: 14

88C-84
MR-372-J84-88C100$649.mif
V5
88C
AIRBAGS AND PRETENSIONERS
Fault finding – Summary table of statuses and parameters
An ignition line or sensor impedance equals 99.9Ω when the component is disconnected or not managed by
the computer.Tool status Diagnostic tool title
ET010Impact detected
ET072Passenger airbag status indicator light activated
ET073Computer locked by tool
ET074Fault warning light activated
ET076Computer in need of replacement
ET108Passenger airbag locking mode
ET143Passenger airbag(s) locked
ET144Fault present or stored
ET168Driver's seat belt contact
ET171Passenger presence detected
Tool parameter Diagnostic tool title
PR001Computer supply
PR104Driver's seat sensor impedance
PR105Impedance line 1
PR106Impedance line 2
PR107Impedance line 3
PR108Impedance line 4
PR109Impedance line 5
PR110Impedance line 6
PR111Impedance line 7
PR112Impedance line 8
PR115Impedance line 11
PR116Impedance line 12
PR117Impedance line 13
PR118Impedance line 14
PR119Impedance line 15
PR120Impedance line 16
PR147Airbag locking circuit impedance
PR148Passenger detection sensor impedance
AIRBAG RC5
Vdiag: 14

88C-85
MR-372-J84-88C100$708.mif
V5
88C
AIRBAGS AND PRETENSIONERS
Fault finding – Interpretation of statuses
–ET010:Impact detected.
This status indicates that an impact was detected by the computer.
–ET072:Passenger airbag status indicator light activated.
This status permits a check on the request by the computer for the passenger airbag indicator
light to be lit.
–ET073:Computer locked by tool.
This status indicates that the computer has been locked by the diagnostic tool.
–ET074:Fault warning light activated.
This status permits a check on the request by the computer for the fault warning light to be lit.
–ET076:Computer in need of replacement.
This status indicates whether the computer should be replaced.
–ET108:Passenger airbag locking mode.
This status signals whether the vehicle is fitted with a passenger airbag locking switch.
–ET143:Passenger airbag(s) locked.
This status indicates the passenger trigger line locking (passenger front airbag, passenger front
chest airbag and passenger lap pretensioner).
–ET144:Fault present or stored.
This status indicates if the computer has detected a present or a stored fault.
–ET168:Driver's seat belt contact.
This status is used to check whether the driver buckle switch is working properly.
–ET171:Passenger presence detected.
This status indicates if a passenger has been detected on the front passenger seat.
AIRBAG RC5
Vdiag: 14