2011 Ram 3500 high beam

14. Shift Lever Indicator
This display indicator shows the transmission shift lever
selection.
15. High Beam Indicator LightThis indicator shows that headlights are on high
beam. Push the multifunction lever forward to
switch the headlights to high beam, and pull toward
yourself (normal position) to return to low beam.
16. Voltmeter
When the engine is running, the gauge indicates the
electrical system voltage. The pointer should stay within
the normal range if the battery is charged. If the pointer
moves to either extreme left or right and remains there
during normal driving, the electrical system should be
serviced.
NOTE: The voltmeter may show a gauge fluctuation at
various engine temperatures. This cycling operation is
caused by the post-heat cycle of the intake manifold heater system. The number of cycles and the length of the
cycling operation is controlled by the engine control
module. Post-heat operation can run for several minutes,
and then the electrical system and voltmeter needle will
stabilize.
17. Cargo Light
The cargo light will illuminate when the cargo
light is activated by pressing the cargo light
button on the headlight switch.
18. Brake Warning Light This light monitors various brake functions,
including brake fluid level and parking brake
application. If the brake light turns on, it may
indicate that the parking brake is applied, that
the brake fluid level is low, or that there is a problem with
the Anti-Lock Brake System reservoir.
14 UNDERSTANDING YOUR INSTRUMENT PANEL

when exiting the vehicle. To make your selection, press
and release the SELECT button until 0, 30, 60, or 90
appears.
Headlamps With Wipers
When this feature is selected and the HEADLIGHT
switch is in the AUTO position, the headlights will turn
on approximately 10 seconds after the wipers are turned
on. The headlights will also turn off when the wipers are
turned off if they were turned on by this feature. To make
your selection, press and release the SELECT button until
a check-mark appears next to the feature showing the
system has been activated or the check-mark is removed,
showing the system has been deactivated.
Automatic High Beams – If Equipped
When this feature is selected, the high beam headlights
will deactivate automatically under certain conditions. To
make your selection, press and release the SELECT
button until a check-mark appears next to the featureshowing the system has been activated or the check-mark
is removed, showing the system has been deactivated.
Refer to “SmartBeam™” in “Understanding The Features
Of Your Vehicle”.
Wiper Mode – If Equipped
When this feature is selected, the system will automati-
cally activate the windshield wipers if it senses moisture
on the windshield. To make your selection, press and
release the SELECT button until a check-mark appears
next to the feature showing the system has been activated
or the check-mark is removed, showing the system has
been deactivated. When this feature is deactivated, the
system reverts to the standard intermittent wiper
operation.
Easy Exit Seat – If Equipped
When this feature is selected it provides automatic driver
seat positioning to enhance driver mobility when enter-
ing and exiting the vehicle. To make your selection, press
38 UNDERSTANDING YOUR INSTRUMENT PANEL

Oil Pressure........................... 13
Speedometer .......................... 12
Tachometer ........................... 11
Voltmeter .......................... 14,49
Gear Ranges ........................ 64,69,75
Idle Up Feature .......................... 53
Information Center, Vehicle ................. 21
Instrument Cluster ...................... 10,11
Intervention Regeneration Strategy ........... 109
Jump Starting ........................... 90
Lights Airbag .............................. 19
Anti-Lock ............................ 19
Brake Warning ......................... 14
Check Engine (Malfunction Indicator) ........ 18
Electronic Stability Program (ESP) Indicator .... 20Fog ................................. 19
High Beam
........................... 14
High Beam Indicator .................... 14
Instrument Cluster ...................... 11
Seat Belt Reminder ...................... 20
Tire Pressure Monitoring (TPMS) ............ 16
Traction Control ........................ 20
Warning (Instrument Cluster Description) ...... 11
Locks Steering Wheel ......................... 6
Maintenance Procedures .................... 98
Maintenance Schedule .................... 136
Manual Transmission ...................... 74
Fluid Level Check ..................... 121
Lubricant Selection ..................... 133
Shift Speeds ........................... 75
Mini-Trip Computer ...................... 30
8
INDEX 165