2011 PORSCHE BOXSTER S engine

32333233
Resonance intake manifold.
The resonance effect, where the air
mass inside the intake manifold is
caused to oscillate is used to optimise
the induction process at all engine
speeds. The engine in the Boxster S is
additionally equipped with a switchable
resonance valve.
The results are high torque, a flat ter
torque curve and high power output.
The sound produced is characteristically
resonant and deep, as you would expect
of a Boxster.

Direct fuel injection (DFI).
Direct fuel injection (DFI) is featured
as standard in both Boxster models.
Multi-hole injectors deliver fuel directly
into the combustion chamber with milli -
second precision. The injection pattern
has been optimised for torque, power
output, fuel consumption and emissions.
With direct injection, the engine manage -
ment system regulates injection timing
individually for each cylinder, as well as
the injection rate for each cylinder bank.
This optimises the combustion process
and therefore fuel economy. Depending
on the engine operating conditions, multi -
ple fuel injections can take place on each operating cycle. This allows the cata
-
ly tic converter to reach normal operating
temperate sooner after a cold start and a
higher maximum torque to be achieved.
DFI improves the internal cooling of the
combustion chamber by having the
mixture prepared directly in the cylinder.
This allows for a higher compression ratio,
which helps to deliver higher power output
at the same time as enhanced engine
efficiency. Injection is regulated by the
electronic engine management system
and emissions are monitored by the stereo
Lambda sensors.
For fuel consumption and CO
2 emissions please refer to page 127.

3435
VarioCam Plus.
VarioCam Plus is a two-in-one engine
concept for adjusting the intake
camshafts and switching the lift of
the intake valves. The system first dif ferentiates bet ween
driver inputs that typify normal, everyday
driving and those inputs that demand
maximum performance. The electronic
engine management system then

imperceptibly adapts valve operation
to the prevailing conditions. This results in instant acceleration and
extremely smooth running.
In short, VarioCam Plus provides

extraordinary power with comparatively
low fuel consumption.

Integrated dry-sump lubrication.
Integrated dr y-sump lubrication ensures
a reliable supply of oil even when a sport y
driving st yle is adopted and the vehicle is
experiencing powerful lateral acceleration.
It also has additional cooling functions. The oil tank is located in the engine, there
-
by eliminating the need for an external oil
tank which saves both space and weight.
To reduce power losses and increase
efficiency, an electronically controlled oil
pump supplies the lubricating points
inside the engine as and when required.
This results in optimum supply of oil,
lower fuel consumption and reduced
emissions.
For ward thrust |
Engine
For fuel consumption and CO2 emissions please refer to page 127.

12
Thermal management.
The Boxster models feature a new version
of thermal management to reduce friction
losses that arise during the warm-up
phase.
Thanks to the selective control strategy
and on-demand, gradual activation of the
various cooling circuits, the engine and
gearbox warm up to normal operating
temperature more rapidly. The conse -
quent reduction in friction also reduces
fuel consumption and CO
2 em issio ns.
During sporty driving, thermal manage -
ment also acts to reduce temperatures
so that a high level of performance is
maintained. Our cross-flow cooling system, as used

in motorsport, supplies each engine
cylinder uniformly with coolant, which
protects the valves against thermal
overload and, therefore, premature wear.
This improves combustion and keeps
emissions, fuel consumption and noise
comparatively low.
Exhaust system.
In the new Boxster models, each cylinder
bank has its own stainless-steel exhaust
tract. Downstream of their respective
rear silencer, the tracts converge into
a connecting tube and a single (Boxster)
or t win (Boxster S) tailpipe. The stereo
Lambda control circuitr y controls and monitors each cylinder bank separately.
For each exhaust tract, four correspond
-
ing oxygen sensors regulate the composi -
tion of the exhaust gas and monitor the
performance of the catalytic converters.
Having separate tracts means that the
exhaust gas can flow more freely. The
resulting reduction in pressure loss has a
positive impact on power output, torque
and the unmistakable engine sound.
Available as an option for the new Boxster
models is the sports exhaust system
1)
including sports tailpipe. It produces an
even more resonant Porsche sound.
For ward thrust |
Engine
For fuel consumption and CO2 emissions please refer to page 127.
1) Not available at launch. Please consult your
Centre for availability.
1 Boxster tailpipe
2 Boxster S t win tailpipe

1
2
38 39
Engine management.
The electronic engine management
system ensures optimum engine perfor -
mance at all times. It regulates all
engine-related functions and assemblies.
The results are optimum power output
and torque with comparatively low fuel
consumption and emissions. Another function is the cylinder-specific
knock control. Since engine cylinders
never all work under exactly the same
conditions, the knock control function
monitors each one separately. The igni
-
tion point is shifted individually, as and
when necessary, to protect the cylinders
and pistons at high engine speeds and loads. For compliance with EU Stand
-
ards, the on-board diagnostics detect
any faults and defects that may occur in
the exhaust and fuel systems and then
notify the driver immediately. This also
prevents increased pollutant emissions
and unnecessary fuel consumption.
SPORT button.
The SPORT but ton on the centre console
is fit ted as standard. When selected,
Sport mode is activated to provide
greater response and enhanced driving
pleasure. Throttle response becomes
even more direct, the rev-limiter is
adjusted to a harder set ting and engine dynamics are tuned for performance

driving. The auto start/stop function is
also deactivated. With the optional Porsche Doppelkupplung
(PDK) transmission, the shift points are
reconfigured are reconfigured to operate at higher engine speeds. Shift times are
reduced and gearshifts become firmer
and more immediate, while throttle-blip
downshifts are accompanied by an
emotive engine sound. Coasting mode
(p. 44) is deactivated automatically.
Auto start/stop function.
The auto start/stop function, which

is integrated as standard in the new
Boxster models, switches of f the engine
when you stop, select neutral and
release the clutch pedal. In cars with
For ward thrust |
Engine
For fuel consumption and CO2 emissions please refer to page 127.
Porsche Doppelkupplung (PDK), it is simply
a case of applying and holding the brake.
All audio and communication systems
remain switched on, as does the air con -
ditioning system.
1 SPORT button
2 Auto start /stop but ton

For ward thrust |
Engine
For fuel consumption and CO2 emissions please refer to page 127.
The engine will restart as soon as you
operate the clutch or, in cars with PDK,
release the brake. This fuel-saving inno -
vation is designed primarily for use in
towns or congested motorway traffic.
The auto start /stop function can be
deactivated and reactivated using a sepa -
rate but ton on the centre console. The
function may be deactivated automatically
under particular circumstances, e.g. in
extreme outside temperatures, when the
SPORT but ton is selected or when there
is low bat tery charge.

Cruise control.
This optional automatic speed controller
for the 19 to 149 mph (30 to 240 km/ h)
speed range is operated using a switch
on a separate control stalk on the steering
column. The advantages are claer, not
only can cruise control be used as a
means of staying within the speed limit,
it also helps you to save fuel by maintain -
ing a constant speed.
Electrical system recuperation.
For enhanced efficiency the new Boxster
models are equipped with intelligent elec-
trical system recuperation. The vehicle
bat tery is recharged by the generator
predominantly under braking. Thanks to this selective recharging, when you
request full driving power the maximum
possible output can be directed straight
to the road.
Servicing.
In the Boxster models, the generator and
air conditioning system are driven by a
single self-adjusting belt. The drive chains
on the camshafts do not normally require
servicing. With the sole exception of the
spark plugs, the ignition system is also
maintenance-free in normal servicing. In
short, longer service intervals mean longer-
lasting driving pleasure.

2 1
3
4
6
2
1 R
7 3
5
4
42
4342
43
Six-speed manual gearbox.
The new Boxster models are equipped
as standard with a light weight six-speed
manual gearbox. Gearshifts are smooth
and optimally adapted to the respective
engine map. Shift throws are short and
sport y and the gear lever is easy to oper -
ate, enabling a rapid gearshift action and
providing a truly engaging driving experi -
ence. The upshift indicator located in the
central circular instrument helps you to
maximise fuel efficiency.
The elevated centre console gives you an
authentic sports car feel. It positions the
gear lever close to the steering wheel, which enables you to change gear as fast
and as ergonomically as possible.
Porsche Doppelkupplung (PDK).
Available as an option for the new Boxster
models is a completely retuned 7-speed
Porsche Doppelkupplung (PDK), featuring
both manual and automatic modes. PDK
offers extremely fast gear changes with no
interruption in the flow of power, improved
acceleration over the manual gearbox, very
short response times, reduced fuel con
-
sumption and a distinct increase in comfort.
In total, PDK has seven forward gears at its
disposal. Gears 1 to 6 have a sports ratio
Act or relax as you please.
Transmission.
and top speed is reached in 6th gear. The
7th gear ratio is longer and keeps engine
speed low to improve ride comfort and
reduce fuel consumption at higher speeds.
The design of PDK is similar to t wo
conventional gearboxes in one. The odd
numbered gears are housed on one
assembly and the even numbered gears
on another, each having its own clutch.
While one gear is engaged, PDK pre-
selects the next gear based on driver
input. When the next gear is requested,
drive is switched from one clutch to
the other in milliseconds, delivering gear
changes with no loss of drive.
For fuel consumption and CO
2 emissions please refer to page 127.
1 Gear lever for six-speed manual gearbox
2 PDK gear selector
3 PDK gearshift switches on multifunction
steering wheel
4 Porsche Doppelkupplung (PDK)
H a l f ge a r b ox 1: ge a rs 1, 3, 5, 7, R
Half gearbox 2: gears 2, 4, 6

For ward thrust |
Transmission
For fuel consumption and CO2 emissions please refer to page 127.
Coasting.
The coasting function available with
Porsche Doppelkupplung (PDK) enables
you to save even more fuel where the
situation allows. The engine is decoupled
from the transmission to prevent
deceleration caused by engine braking.
In this way, optimum use is made of
the vehicle’s momentum, allowing it to
coast for longer distances.
For example, you may want to slow down
from 60 mph to 40 mph in anticipation
of the change of speed limit ahead. As
you ease off the accelerator pedal, PDK
deselects the current gear automatically
and you begin to coast in neutral until
you have reached your desired speed. As
soon as you operate the accelerator or brake pedal, PDK re-engages the appro
-
priate gear within fractions of a second.
The process is smooth and seamless
thanks to the extremely fast clutch.
Another way to reduce fuel consumption
is to utilise the coasting function on
downhill gradients that are gentle enough
for you to maintain a constant speed.
Efficient on long journeys, such as on the
motorway, PDK remains ready to respond
as swiftly and precisely as you would
expect.
In short, driving in coasting mode makes
a real impact on fuel consumption with -
out any need for compromise on comfort
or sporty performance.
With the SPORT but ton selected, the full
advantages of the new version of PDK
are brought into play: a more immediate
response to throt tle inputs, even shorter
shift times and swift, throttle-blip down -
shifts on overrun and when braking –
always accompanied by an emotive engine
sound.
With the optional Sport Chrono Package,
PDK is enhanced by the ‘Launch Control’
and ‘motorsport- derived gearshif t strategy’
functions (p. 63) for even faster gear
changes and the best possible per formance
thanks to a boost in torque during upshift
phases. Overrun downshifts provide
extremely sport y braking and acceleration
for added excitement.

Even when you want to make a break
from everyday life, you should still keep
your feet on the ground.
The chassis of the new Boxster models
are an excellent match for the powerful
engines. Axle components are made
predominantly of aluminium. This light -
weight material helps to keep the weight
of the vehicle and its unsprung masses
low, which reduces fuel consumption,
improves comfort and increases agility.
The wide track is a prominent feature to
provide additional stability and enhanced
comfort, the wheelbase has been extended
by 60 mm compared with that of the
previous model. The new independent
suspension features lightweight spring-strut
a
xles with longitudinal and transverse links
and, at the front, cross members that
have been refined for optimum control.
As a result, each wheel moves precisely
to ensure excellent directional stability
and superior handling in all situations.
What does this mean for the driver? The
sophisticated engineering of the chassis,
combined with the mid-engined layout,
achieves impressive dynamic performance.
Body roll and pitch have been practically
eliminated to offer a level of agilit y that
turns each corner into an incomparable
experience.
A love of freedom is no reason
to lose self-control.
Chassis.
Porsche Active Suspension
Management (PASM).
Optional PASM, the electronic damping
control system, suits the new Boxster
models down to the ground. PASM
actively and continuously regulates the
damping force for each wheel according
to the
road conditions and driving st yle.
In addition, the suspension is lowered
by 10 mm.
The driver can select bet ween t wo
dif ferent modes: ‘Normal’ which is a
blend of performance and comfort,
and ‘Sport ’ where the setup is much
firmer. Depending on the mode selected,
For ward thrust |
Chassis
therefore, PASM can be both sportier
and more comfortable than the standard
chassis. The PASM control unit evaluates
the driving conditions and modifies the
damping force on each of the wheels in
accordance with the selected mode.
Sensors record the body movements that
accompany powerful acceleration, brak -
ing or uneven road surfaces. This enables
intelligent adaptation of damper stif fness
for the selected mode, optimising contact
bet ween each individual t yre and the road
and reducing pitch.