5/
SAFETY
"ISOFIX" MOUNTINGS
Your vehicle is approved with regulation ISOFIX mountings.
The diagram below indicates which seats are fi tted with these ISOFIX
mountings:
These are three rings for each seat:
- two rings A
, located between the vehicle seat back and cushion,
indicated by a label,
- a ring B
referred to as the TOP TETHER
, located under a cover
behind the top of the backrest for fi xing the upper strap. This ISOFIX mounting system guarantees you fast, reliable and safe
fi tting of the child seat in your vehicle.
The ISOFIX child seats
are fi tted with two locks which are secured
easily on the two rings A
.
Some also have a top tether strap
which is attached to ring B
.
To attach this strap, open the cover at the top of the backrest. Then fi x
the hook on ring B
and tighten the top tether strap.
The incorrect installation of a child seat in a vehicle compromises
the child's protection in the event of an accident.
For information regarding the possibilities for installing ISOFIX
child seats in your vehicle, consult the ISOFIX child seat locations
table.
8/
PRACTICAL INFORMATION
CHANGING A FUSE
ACCESS TO TOOLS
The extraction tweezer is fi tted to the back of the dashboard fusebox
cover.
For access to it:
)
open the glove box lid,
)
push the opening guide to the left to pass the fi rst notch,
)
open the glove box lid fully,
)
turn the screw a quarter of a turn to the left,
)
unclip the fusebox cover by pulling at the top right,
)
disconnect the cover completely and turn it over,
)
extract the carrier on the back of which fi tted the tweezer.
CHANGING A FUSE
Before changing a fuse, it is necessary to:
)
identify and rectify the cause of the failure,
)
switch off all electrical consumers,
)
immobilise the vehicle and switch off the ignition,
)
identify the failed fuse using the tables and diagrams in the
following pages.
When working on a fuse, it is important to:
)
use the special tweezer to extract the fuse from its housing.
)
always replace the failed fuse with a fuse of the same rating
(same colour); the use of a fuse of a different rating may cause a
malfunction (risk of fi re).
Good
Failed
Tweezer
If the fault recurs soon after changing a fuse, have the electrical
system of your vehicle checked by a PEUGEOT dealer or a
qualifi ed workshop.
