2011 NISSAN TIIDA Rear seat cushion hook

EI-48
< ON-VEHICLE REPAIR >
FLOOR TRIM
FLOOR TRIM
Removal and InstallationINFOID:0000000005929574
REMOVAL
1. Disconnect both the negative and positive battery terminals, then wait at least three minutes.
2. Remove front seat assembly RH/LH and rear seat cushion. Refer to SE-12, "
Removal and Installation"
(Front seat), and SE-16, "Removal and Installation" (60:40 Split Fold Down Seat - Hatchback), or SE-22,
"Removal and Installation" (60:40 Split Fold Down Seat - Sedan), or SE-28, "Removal and Installation"
(Fixed Back Seat).
3. Remove center console and floor bracket. Refer to IP-12, "
Removal and Installation".
4. Remove instrument lower cover. Refer to IP-12, "
Removal and Installation".
1. Clip C1012. Steering column shaft cover 3. Floor carpet hook
4. Front floor spacer 5. Rear floor spacer6. Floor trim
Metal clip Clip CF110Vehicle front
AWJIA0418ZZ
Revision: May 2010 2011 Versa

SE-16
< SERVICE INFORMATION >
REAR SEAT
Removal and Installation
INFOID:0000000006415821
CAUTION:
When removing and in stalling, use shop cloths to protect parts from damage.
60:40 SPLIT FOLD DOWN SEAT - HATCHBACK
Removal
1. Pull seat cushion up, then remove the seat cushion from the
seat cushion hook.
2. Remove the center seatbelt anchor bolt (A) from under the seat.
3. Remove the seatback mounting bolts in the reverse order as shown from the right rear seat back brackets.
7. Rear seatback assembly RH 8. Rear seatback pad RH 9. Seat cushion assembly
10. Rear seat cushion trim 11. Rear seat cushion pad and frame 12. Rear seat cushion hook (body)
13. Rear seatback assembly LH 14. Rear seatback trim LH 15. Rear seatback pad LH
16. Trim clip 17. Rear seatback side trim RH 18. Rear seatback side pad and frame
LH
19. Rear seatback side assembly LH 20. Rear seat lock assembly 21. Locking headrest holder
22. Rear headrest 23. Free headrest holder 24. Rear seat cushion hook (seat)
25. Rear seatback side bracket 26. Rear seat striker RH 27. Rear seatback center bracket
28. Rear seat striker LH
PIIB4085J
WIIA1234E
WIIA1287E
Revision: May 2010 2011 Versa

SE-22
< SERVICE INFORMATION >
REAR SEAT
Removal and Installation
INFOID:0000000005929612
CAUTION:
When removing and in stalling, use shop cloths to protect parts from damage.
60:40 SPLIT FOLD DOWN SEAT - SEDAN
Removal
1. Pull seat cushion up, and then remove the seat cushion from the
seat cushion hook. Slide the seat cushion forward.
2. Remove the center seatbelt anchor bolt (A) from under the seat and slide the seatbelt through the seat cushion trim cover (1).
3. Fold the right seatback and remove the seatback mounting bolts (A) from the left rear seat back brackets. Remove the seatback
from the vehicle.
13. Rear seat cushion trim 14. Rear seat cushion assembly 15. Rear seat cushion pad and frame
16. rear seat cushion hook (body) 17. Rear seatback assembly RH 18. Rear seatback trim RH
19. Rear seatback pad RH 20. Rear seatback trim LH 21. Rear seatback assembly LH
22. Rear seatback pad LH 23. Trim clip 24. Rear seat lock assembly
25. Rear seatback lock knob 26. Locking headrest holder27. Free headrest holder
28. Rear seat headrest 29. Rear seat cushion hook (seat) 30. Rear seatback side bracket
31. Rear seat striker RH 32. Rear seatback center bracket 33. Rear seat striker LH
PIIB4085J
WIIA1380E
WIIA1382E
Revision: May 2010 2011 Versa

REAR SEATSE-27
< SERVICE INFORMATION >
C
DE
F
G H
J
K L
M A
B
SE
N
O P
Component Parts DrawingINFOID:0000000006411914
FIXED BACK SEAT - SEDAN
AWJIA0531ZZ
1. Free headrest holder 2. Rear seatback assembly3. Seatback trim
4. Rear seat cushion pad and frame 5. Rear seat cushion trim 6. Rear seat cushion pad and frame
7. Rear seat cushion hook (body) 8. Locking headrest holder 9. Rear seat headrest
Revision: May 2010 2011 Versa

SE-28
< SERVICE INFORMATION >
REAR SEAT
Removal and Installation
INFOID:0000000005929614
CAUTION:
When removing and in stalling, use shop cloths to protect parts from damage.
FIXED BACK SEAT
Removal
1. Pull seat cushion up, and then remove the seat cushion from the
seat cushion hook. Slide the seat cushion forward.
2. Remove the center seatbelt anchor bolt (A) from under the seat and slide the seatbelt through the seat cushion trim cover (1).
3. Remove the lower seatback bolts (A) and lift seatback to disen- gage from upper seatback bracket.
Installation
Installation is in the reverse order of removal.
Disassembly and AssemblyINFOID:0000000006411913
FIXED BACK SEAT
Disassembly of SeatbackTrim and Pad
Remove the rings to separate the trim and pad.
Assembly of Seatback Trim and Pad
Assembly is in the reverse order of disassembly.
Disassembly of Seat Cushion Trim and Pad
10. Rear seat cushion hook (seat) 11. Rear seat bracket 12. Rear seat bracket cover LH
13. Rear seat bracket cover RH 14. Rear seat brace
PIIB4085J
WIIA1380E
WIIA1381E
Revision: May 2010 2011 Versa