2011 MITSUBISHI OUTLANDER SPORT wheel

3
1
3
5
Headlights Swit\fh
Rotate the outer knob to the first position to turn on the tail,\: parking and dash li\:ghts. Rotate the outer knob to the second position to turn
on the headlights. \:Pull the lever towards you to activate or flash the high b\:eams.
Steering wheel audi\b r\wem\bte \f\bntr\bl swit\fh
the switch can be operated when the ignition\: switch is in either the \:ON or ACC position.
TO INCREASE VOLUME: w hile the button [1] is pressed, the volume will continue to increase.
TO DECREASE VOLUME: w hile the button [2] is pressed, the volume will continue to decrease.
Do not press multiple buttons at the same time when\: using the steering wheel audio remote control switch.
Sp\brtr\bni\f steering wheel paddle\w shifters (if equipped)
Rapid gear shifting \:is possible simply by operating the sportronic steering wheel paddle sh\:ifters. Pull the right \:(+) sportronic steering wheel
paddle shifter once to shift up one gear. Pull the left (\b) \:sportronic steering wheel paddle sh\:ifter once to shift down one gear.
t o default back to the automatic mode, pull and hold the \:right (+) paddle shi\:fter for about three seconds.
Hands-Free Bluet\b\bth® \fellular ph\bne interfa\fe system with v\bi\fe re\f\bgniti\bn (if equipped\w) (Additi\bnal equipment \wmay be required)
You should first connect (pair) your bluetooth compatible cellular phone to the system. f or instructions on pairing\: your phone, see page 9.
TO PICK UP: Press the button [2] when an incoming call is received to answer the phone. TO HANG UP: Press the button [3] during a call to
end the current call. MAKING A CALL BY USING THE TELEPH\wONE NUMBER: \f. Press the button [1]. 2. say DIAL. 3. a fter the voice guide
says NUMBER PLEASE, say the telephone number. t he system, using voice recognition, will then\: make the call.
Cruise \f\bntr\bl swit\fh
TO ACTIVATE: Press the ON OFF switch. Press the COAST SET switch while driving at the desired speed.
TO INCREASE THE SET SPEED: Use one of the following options: \f. ACC RES switch: if you press and hold down the ACC RES switch,
the speed will gradually increase. w hen you reach your desired speed, release the switch. Your cruising speed is\: now set.
2. ACCELERATOR PEDAL: Use the accelerator pedal to reach your desired speed. Press the COAST SET switch.
Fr\bnt wind\bw wiper and washer swit\fh
make sure the ignition switch is in the ON or ACC position. Pull down the wiper lever to move the front window wiper.
t o activate windshield washers, pull the lever toward you.
Rear wind\bw wiper and washer swit\fh (if equipped)
make sure the ignition switch is in the ON or ACC position. t urn the knob to operate the switch.
f or more details, see page \f\f.\:
4123
2
1
2
At Your Fingertips
6

7
6) Pan\brami\f R\b\bf P\bwer Shade (if equip\wped)
TO OPEN: Push the switch in the desired direction [1]
TO CLOSE: Push the switch in the desired direction [2]
TO STOP: Push center of switch [3]
Sunshade Illuminati\bn Swit\fh (if equipped) – the sunshade illumination s witch turns on when th\:e ignition switch or the operation
mode is in on or acc. t he brightness of the sunshade illumination can be adjusted to three different levels. each time you press the
switch (located near the front map lamps), the brightness switches in sequence from high  middle  low  off  high.
7) Heated Seats (if equipped)
t he heated seat controls are located at the side of each f\:ront seat. t he heated seats can be operated by pushing the switch when the
ignition switch is in the ON position. t he indicator light will illum\:inate while the heater is on.
8) Drive M\bde Sele\ft\br (if equipped)
t he drive mode can be switched by turning the dial \:while the ignition \:switch is in the ON position. t he following drive modes are
available:
2WD: t his mode is for economical driving on\: normal dry roads and freeways.
4WD AUTO: t he default mode. t his mode is for all driving conditions on various roads.
4WD LOCK: t his mode is for driving in slippery\: conditions such as \:on snow\bcovered roads or sand.
9) Multi-Inf\brmati\bn Display
t he multi\binformation display shows fuel remaining, outside t\:emperature, selector lever position, all\bwheel drive operation
status, etc. it is also possible to change elements su\:ch as the language \:and units by using the multi\bi\:nformation meter
(INFO) button. t he display screen is different depending on whet\:her the ignition switch is in the OFF or ON position.
10) ECO Indi\fat\br (if equipped)
w hen the eco indicator light is on, your current driving style supports good fu\:el economy.
1
2
3

10
Look at this . . .
1) FAST-Key (if equipped) \b with fast \bkey, you do not need to use the key to open the door or start the car. You can leave the key in your pocket or
purse.
LOCK the doors and tailg\:ate by pressing either the lock\: button on the key fob or pressing the black butt\:on to the right of the d\:oor handle or under
the liftgate handle.
UNLOCK the doors by pressing either the unlo\:ck button on the key fob or by pressing the black butt\:on to the right of the d\:oor handle. listen for the
beep and then open the\: door.
UNLOCK TAILGATE by grasping the liftgate handle.
FAST-Key Tip:
For\bv\fhicl\fs\bwithout\bPush\bButt\ton\bStart \b in the event the key fob battery loses power, remove the emergency key from the fob, turn it around and
insert the head of t\:he key into the slot in the f\:ob and use it as a \:traditional key to unlock the doors \:and start the car. it is not a valet key. if you leave
the fast \bkey in the vehicle and try to lock the doors, y\:ou will hear a series\: of beeps.
For\bv\fhicl\fs\bwith\bPush\bButton\bStart \b if the fast \bkey is not operating properly, you can insert the fast \bkey into the key slot in the glove box.
s tarting the engine a\:nd changing the operation mode should no\:w be possible.
2) Start/St\bp Engine Butt\bn – to start your vehicle using the Pus\:h button s tart, depress the brake pedal and push the \:start
button. To\bstop\bth\f\bv\fhicl\f\busing\bth\f\bPush\bBut\tton\bStop: make sure the vehicle is completely stopped, move the selector lever
to the “P” (P aRk) position, fully en\:gage the parking brake and press the engine button to stop the engine. if you have to bring
the engine to an emergency stop while driving, press and hold the engi\:ne switch for 3 seconds or more, or press it quickly 3
times or more. t he engine will stop and the operation mode will go t\:o acc.
Changing\bth\f\bOp\fration\bMod\f: if you press the start/stop/engine button without depressing the brake pedal, you can change
the operation mode in order of off , acc, on, off.
3) Teles\f\bpi\f Steering Wheel – located on the underside o\:f the steering column is a lever that unlocks the steering column and allows adjustment of
the height and distance of the steering wheel to the driver. w hen adjustments are complete, push the lever back to its original posit\:ion to lock the
steering wheel in place. a djust the steering wheel only whe\:n the vehicle is at a complete stop.
4) Fuel D\b\br Release – to open the fuel door, pull up on the fuel\: door lever located on the floor to the left of the dr\:iver’s seat.