2011 MITSUBISHI OUTLANDER SPORT warning

6
What does a\f\f this stu\b do?
1) Digital Cl\b\fk
t ime is displayed when the ignition\: key is in the ON or ACC position. t o set the time, press and hold the CLOCK [1] button until the display
flashes. t o change the hour, press the H [2] button. t o change the minutes, press the M [3] button.
once you have made your adjustments to the hours and min\:utes, then press the [1] button once more to lock in the time.
2) Multi-Inf\brmati\bn Meter (INFO) Butt\bn
t he info button changes display information for warnings, odometer/tripmeter, service reminder, engine coolant temperature, average
and momentary fuel c\:onsumption, driving \:range and average speed. it is also possible to change elements su\:ch as the language \:and units
used on the multi\bin\:formation display by pushing the multi\b\:information meter (INFO) button.
3) A\ftive Stability C\bntr\bl (ASC) OFF Butt\bn
t his system automatically turns on when the ignition switch is turned to the ON position. to deactivate the ASC, press the ASC OFF button
for 3 seconds or longer. t o reactivate the ASC, press the ASC OFF button again. mitsubishi motors recommends that the ASC normally be
kept in the ON position. f or more information, refer to your owner’s manual.
4) Rhe\bstat Meter Illuminati\bn Butt\bn
t he brightness of the instrument panel can be \:adjusted by pressing the button.
5) P\bwer Outlet (if equip\wped)
12 V POWER OUTLETS:
TYPE 1: l ocated in the floor console and the lugg\:age compartment. a ccessories can be operated when the ignition\: switch is in either the \:
ON or ACC position.
TYPE 2: l ocated in the floor console box. a ccessories can be operated in all ignition \:switch positions.
123

11
5) Seatbelts – in order to help with securing \:child safety seats and other cargo, mitsubishi’s seat belts have an a uto locking Restraint (alR) system.
w hen the seat belt is pulled all\: the way out, it engages t\:he alR which restricts it from pulling out. t o release the alR, simply allow the seat belt to
retract to its original posit\:ion.
6) Tire Pressure M\bnit\bring System (TPMS) – illuminates a warning light when y\:our tire pressure is too low. Please n\bte that \fhanges in the \buts\wide
temperature may de\frease tire pressure \fausing the TPMS l\wight t\b turn \bn. if the tPms light stays illuminated, check your tire pressure. f or more
information on tPms, refer to your owner’s manual.
7) Anti-L\b\fk Braking System (ABS) – each time your vehicle is started and driven a short distance, you will hear the sou\:nd of the abs motor operating
from the right front engine compartment. t his is the normal s\:ound the anti\block braking system makes when performing a self check.\:
8) Windshield Wiper Lever \b the wiper control lever is located on the right hand\: side of the steering column.
• Push the wiper lever down:
o one position to int for intermittent wiping
v ehicles equipped with \:Rain Sensing Wipers will display a Uto rather than int. when selected and moisture is
detected on the windshield\:, the wipers will aut\:omatically make a swipe across the glass.
o two positions for low wiping speed
o three positions for high speed
• Pull the lever towards you to dispense windshield\: washer fluid and wipers\: will automatically make several passes across the windshield
• Push the lever up to have the wipers complete a single pass
9) Rear Windshield Wiper Kn\bb – the wiper control knob is located on the right hand\: side of the wiper control lever. t he Rear window wiper/washer
is activated using the outer knob of the winds\:hield wiper controls.
• t wist the wiper knob cloc\:kwise:
o one position down to int for intermittent wiping
o two positions down to on for normal speed
o Push the end of the \:lever towards the steering column to spray the rear glass
Shown with rain sensing
feature if equipped, othe\,rwise
\fUTO \b intermittent feature.