2011 MITSUBISHI LANCER RALLIART window

3
1
3
5
Headlights Swit\fh
Rotate the outer knob to the first position to turn on the tail,\: parking and dash li\:ghts. Rotate the outer knob to the second position to turn
on the headlights. \:Pull the lever towards you to activate or flash the high b\:eams.
Steering wheel audi\b r\wem\bte \f\bntr\bl swit\fh
the switch can be operated when the ignition\: switch is in either the \:ON or ACC position.
TO INCREASE VOLUME: w hile the button [1] is pressed, the volume will continue to increase.
TO DECREASE VOLUME: w hile the button [2] is pressed, the volume will continue to decrease.
Do not press multiple buttons at the same time when\: using the steering wheel audio remote control switch.
Sp\brtr\bni\f steering wheel paddle\w shifters (if equipped)
Rapid gear shifting \:is possible simply by operating the sportronic steering wheel paddle sh\:ifters. Pull the right \:(+) sportronic steering wheel
paddle shifter once to shift up one gear. Pull the left (\b) \:sportronic steering wheel paddle sh\:ifter once to shift down one gear.
t o default back to the automatic mode, pull and hold the \:right (+) paddle shi\:fter for about three seconds.
Hands-Free Bluet\b\bth® \fellular ph\bne interfa\fe system with v\bi\fe re\f\bgniti\bn (if equipped\w) (Additi\bnal equipment \wmay be required)
You should first connect (pair) your bluetooth compatible cellular phone to the system. f or instructions on pairing\: your phone, see page 9.
TO PICK UP: Press the button [2] when an incoming call is received to answer the phone. TO HANG UP: Press the button [3] during a call to
end the current call. MAKING A CALL BY USING THE TELEPH\wONE NUMBER: \f. Press the button [1]. 2. say DIAL. 3. a fter the voice guide
says NUMBER PLEASE, say the telephone number. t he system, using voice recognition, will then\: make the call.
Cruise \f\bntr\bl swit\fh
TO ACTIVATE: Press the ON OFF switch. Press the COAST SET switch while driving at the desired speed.
TO INCREASE THE SET SPEED: Use one of the following options: \f. ACC RES switch: if you press and hold down the ACC RES switch,
the speed will gradually increase. w hen you reach your desired speed, release the switch. Your cruising speed is\: now set.
2. ACCELERATOR PEDAL: Use the accelerator pedal to reach your desired speed. Press the COAST SET switch.
Fr\bnt wind\bw wiper and washer swit\fh
make sure the ignition switch is in the ON or ACC position. Pull down the wiper lever to move the front window wiper.
t o activate windshield washers, pull the lever toward you.
Rear wind\bw wiper and washer swit\fh (if equipped)
make sure the ignition switch is in the ON or ACC position. t urn the knob to operate the switch.
f or more details, see page \f\f.\:
4123
2
1
2
At Your Fingertips
6

5Audio System
navigation sYstem (if eqUiPPeD ) – PRessing the Panel keYs oR toUching the scReen bUttons can PeRfoRm vaRioUs
fUnctions. oPeRate the scReen b Y toUching lightlY with a fingeRtiP. foR a UDio s Ystem oPeRating instRUctions in
lanceRs withoUt a navigation s Ystem, Please RefeR to Y oUR owneR’s manUal.
Panel operation buttons:
MODE – displays the av mode selection screen
AUDIO – switches between the selected av mode and navigation screen
VOL – adjust the volume
PWR – turns on and off the audio function\:s
SET – displays the settings screen
OPEN – opens and closes \:the monitor panel
ENT with Joystick – implements th\:e selected item, scrolls the maps and im\:plements item selection.
MENU – displays the navigation menu screen
SCALE – changes the map s\:cale
NAVI – displays the current location screen
INFO – displays the info screen
C\fimate Contro\f System
Temperature C\bntr\bl Dial – t urn the temperature control dial clockwise to make the air warmer. t urn it counterclockwise to make the air cooler.
w hile the engine coolant temperature is low, the temperature of the air from the heater will be cool/cold until the engin\:e warms up, even if you
have selected warm air with the dia\:l.
Air Sele\fti\bn Swit\fh – select the outside ai\:rflow position to keep the windshield an\:d side windows clear and to quickly remove fog or frost from
the windshield. t o change the air sel\:ection, simply press the air selection \:switch. w hen the air conditioning turns o\:n, the air selection\: is controlled
automatically.
Bl\bwer Speed Sele\fti\bn D\wial – w hen the ignition switch is in the ON position, turn the \:blower speed selection dia\:l to set speed. w hen the blower
speed selection dial \:is set to the OFF position, all fan\bdriven airflow will stop.
Air C\bnditi\bning Swit\fh – Push the switch and the air conditioning compressor and indicator light will come on.
M\bde Sele\fti\bn Dial – t his dial controls the direction of airflow, not the amount of\: airflow. t he amount of airflow is controlled by the blower
selection dial. t o change the direction of air flowing from the vents, turn the mode \:selection dial to the desired airflow position. if equipped
with a uto temperature c ontrol, select AUTO for automatic air direction and blower fan speed. in AUTO mode, the system will adjust fan
speed, mode selection \:and temperature automatically.
Ele\ftri\f Rear Wind\bw Def\bgger Swit\fh – w hen the engine is run\:ning, the indicator light will come on when you push the electric \:rear
window defogger switch helping clear away moisture or light frost.
TIP: F\br Qui\fk Defr\bsting
\f. set the mode selection\: dial to the
position.
2. set blower dial to the maximum speed.
3. set the temperature to the highest position.
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
External Audi\b Input Fun\fti\bn (if\w equipped)
You can listen to your portable audio
equipment, through your vehicle’s speakers
by connecting the audio\: equipment to the
Rca input connectors found in the upper
front console area or the Usb port in glove
box area. To activate the RCA i\fput mo\be,
press a\f\b hol\b the CD but\Cto\f for more tha\f
2 seco\f\bs.
Au xiliary Au dio connector
(RCA )
Au xiliary \fideo connecto r
(RCA )
Ty
pe 1

11
5) Windshield Wiper Lever \b the wiper control lever is located on the right hand\: side of the steering column.
• Push the wiper lever down:
o one position to int for intermittent wiping
v ehicles equipped with \:Rain Sensing Wipers will display a Uto rather than int. when selected and moisture is
detected on the windshield\:, the wipers will aut\:omatically make a swipe across the glass.
o two positions for low wiping speed
o three positions for high speed
• Pull the lever towards you to dispense windshield\: washer fluid and wipers\: will automatically make several passes across the windshield
• Push the lever up to have the wipers complete a single pass
6) Rear Windshield Wiper Kn\bb (if equipp\wed) – the wiper control knob is located on the right hand\: side of the wiper control lever. t he Rear window
w iper/w asher is activated using the outer knob of the winds\:hield wiper controls.
• t wist the wiper knob cloc\:kwise:
o one position down to int for intermittent wiping
o two positions down to on for normal speed
o Push the end of the \:lever towards the steering column to spray the rear glass
7) Bremb\b Brakes (Lan\fer Ev\bluti\bn \bnly) – the brembo brakes supplied on the lancer e volution are designed for high performance stopping power.
brake noise in this type \:of performance vehicle is common. make sure to stay on regularly scheduled m\:aintenance to keep your brakes and your
vehicle operating at their peak performance.
8) Tires (Lan\fer Ev\bluti\bn \bnly) – the tires on the lancer e volution are performance tires designed to grip the road surface tightly to
maximize performance. t his may cause the tires to wear quicker than regular tires. make sure to rotate and inspect your tires regularly
according to your vehicle’s schedule maintenance plan.
Shown with rain sensing
feature if equipped, othe\,rwise
\fUTO \b intermittent feature.