2011 MITSUBISHI ENDEAVOR keyless

Setup 2-17
Operation of MMCS
Equipment
Various equipment settings can be
performed.
1 Display the Main Menu and
touch [Setup]
eng_507
2 Touch [Equipment]
eng_363
The equipment settings screen is displayed.
3 Touch [Change]
eng_335
4 Touch an item to set
There are 5 pages of setting items. Touch [
]
or [ ] of “Page” to change between the setting
screens and perform the settings.
eng_333
5 Touch [Back]
The equipment settings are completed.
Keyless Entry SystemSettings related to the keyless entry system can
be performed.
eng_333
Horn Answerback
Sounds [On]: Sound is made when the key
locks or unlocks the vehicle.
[Off]: Sound is not made when the
key locks or unlocks the vehicle.
Button
Pushes[Once]: Horn sounds when door is
locked by keyless.
[Twice]: Horn sounds when
door lock is pushed twice using
keyless.(Horn sounds if doors are
already locked.)Turn Signal Lights Answerback
[Locking only] Tur n signal lights illuminate
only when the vehicle is
locked.
[Unlocking only] Tur n signal lights illuminate
only when the vehicle is
unlocked.
[Both] Tur n signal lights illuminate
when the vehicle is locked or
unlocked.
[Not-operated] Tu r n signal lights do not
illuminate in either case.

Setup 2-19
Operation of MMCS
Power Door LocksSettings related to the power door locks can be
performed.
eng_325
Automatic Relocking after Unlocked with Keyless
Entry System
[30 sec] Locks after 30 seconds.
[60 sec] Locks after 60 seconds.
[120 sec] Locks after 120 seconds.
[180 sec] Locks after 180 seconds.Unlock Operation with Key and Keyless Entry System[Only Driver's
Door]
Only the driver’s door unlocks.
[All Doors] All doors unlock.
Returning the Settings to Default
1 Display the [Equipment] screen
(2-17) 2 Touch [Reset All]
eng_335
3 Touch [Yes]
eng_323

The equipment settings are returned to default.
Clearing the Screen
The screen can be cleared.
1 Display the Main Menu and
touch [Setup]
eng_507
2 Touch [Blank]
eng_363

eng_321
The screen is cleared.NOTE After the screen is cleared, touch the screen
again to return to the Setup screen.