Replacing components
146
1.Place the foldable chock* behind the front 
wheel on the other side of the vehicle or in 
front of the wheel if the vehicle is on an 
incline. If the wheel is changed on a surface 
with a more severe slope, take additional 
precautions to secure the vehicle from roll-
ing.
2.Uncover the lug bolts if necessary.
3.Loosen the lug bolts by a half turn.
Jacking up the vehicle
The vehicle jack is designed for changing 
wheels only. Do not attempt to raise 
another vehicle model with it or to raise any load 
of any kind. To do so could cause accidents and 
personal injury.<
1.Place the jack at the jacking point closest to 
the wheel.
The jack base must be perpendicular to the 
surface beneath the jacking point.
2.During jacking up, insert the jack head in the 
square recess of the jacking point.
3.Jack the vehicle up until the wheel you are 
changing is raised off the ground.
Mounting the space-saver spare tire
1.Unscrew the lug bolts and remove the 
wheel.
2.Remove accumulations of mud or dirt from 
the mounting surfaces of the wheel and 
hub. Clean the lug bolts.
3.Lift the new wheel into place.
4.Screw at least two lug bolts finger-tight into 
opposite bolt holes.
5.Screw in the remaining bolts.
6.Tighten all the lug bolts firmly in a diagonal 
pattern.
7.Lower the vehicle.
8.Remove the jack.
Tightening the lug bolts
Tighten the lug bolts in a diagonal pattern.
Immediately have the wheels checked 
with a calibrated torque wrench to ensure 
that the lug bolts are firmly seated. Otherwise, 
incorrectly tightened lug bolts can present a 
safety hazard.<
Tightening torque: 103.3 lb ft or 140 Nm.
Replace the defective tire as soon as possible 
and have the new wheel/tire assembly bal-
anced.
Vehicle battery
Maintenance
The battery is 100 % maintenance-free, the 
electrolyte will last for the life of the battery 
when the vehicle is operated in a temperate cli-
mate.
Battery replacement
Only use vehicle batteries that have been 
approved for your vehicle by the manu-
facturer; otherwise, the vehicle could be dam-
aged and systems or functions may not be fully 
available.<
After a battery replacement, have the battery 
registered on the vehicle by your dealer to