2011 MERCEDES-BENZ G-CLASS lock

[x] Cancel search: lock

Page 66 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual anti-theft alarm system will be triggered
( Y  page 59).XTo end the alarm:  insert the key into the
ignition lock.
Removing the mechanical key
XPush release catch  : in the direction of
the arrow and

Page 68 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual Problems with the SmartKeyProblemPossible causes/consequences and M SolutionsYou cannot lock or
unlock the vehicle
using the SmartKey.The SmartKey battery is discharged or nearly discharged.XPoint the

Page 69 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual Doors
Important safety notes
GWarning
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children unsuper

Page 70 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual iIt is only possible to lock the vehicle
centrally if all doors are closed.XTo unlock:  press button  :.XTo lock:  press button  ;.
You can open a front door from inside the
vehicle even if it has bee

Page 71 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual XTake mechanical key ; out of the
SmartKey ( Y page 63).XInsert mechanical key  ; into the lock of
the driver's door as far as it will go.XTurn mechanical key  ; clockwise as far as
it will go to

Page 72 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual GWarning!
The tailgate swings open to one side. Always
make sure there is sufficient clearance for the
tailgate.
Make sure the tailgate is closed when the
engine is running and while driving. Among
ot

Page 73 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual GWarning!
When closing the door windows, make sure
there is no danger of anyone being harmed by
the closing procedure.
Activate the override switch when children
are riding in the back seats of the ve

Page 74 of 288

MERCEDES-BENZ G-CLASS 2011  Owners Manual If potential danger exists, proceed as follows:
R Release button  & to stop the closing
procedure. To open, press and hold button
% . To continue the closing procedure
after making sure that there is