•You can interrupt the system at any time while it is speaking by
pressing
. The system will respond with a tone and allow you to
speak your command.
What can I say?
To access the available voice commands for the current session, do one
of the following:
•During a voice session, press the
icon at the bottom of the screen.
•Say “What Can I Say??” for an on screen listing of the possible voice
commands that are associated with your current voice session.
•Press
on the steering wheel controls and after the tone say “Help”
for an audible list of possible voice commands.
To access a list of available voice commands
•Press Menu > Help > Voice command list
OR
•Press
on the steering wheel controls and when prompted, say any
of the following (if available):
•List of Commands•Phone List of Commands
•Radio List of Commands•Climate Control List of
Commands
•Navigation List of Commands•Travel Link List of Commands
•Sirius Satellite List of Commands•Audio List of Commands
•USB List of Commands•SD Card List of Commands
•Bluetooth Audio List of
Commands•Browse List of Commands
Global voice commands
The following voice commands can be spoken at any time during a voice
session:
•Help•What Can I Say?
•Main Menu•Go Back
•Next•Previous
•Exit•List of Commands
Voice recognition system overview
14SeeEnd User License Agreementat the end of this book
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)
•Destination symbol:This icon
indicates the location of the final
destination on the map.
•Next maneuver point:This icon
shows the location where the
next turn should occur on the
planned route.
•No GPS symbol:This icon
indicates that insufficient GPS
satellite signals are being received
for accurate map positioning. The
symbol may be intermittently displayed under normal operation in an
area with poor GPS access.
Quick touch buttons
When in map mode, touch anywhere on the map display to access the
following options:
•Set as Dest:Press to select a scrolled location on the map as your
destination. (You may scroll the map by pressing your index finger on
the map display. When you reach the desired location, simply let go
and then press ‘Set as Dest’.
•Set as Waypoint:Press to set the current location as a waypoint.
•Save to FavoritesPress to save the current location to your
favorites.
•POI Icons On/Off:Press to select POI icons to be displayed on the
map. Up to three icons can be selected for display on the map at the
same time.
•Traffic List (if SIRIUSTravel Link™ is active):Press to display
nearby traffic incidents when a route is not active. The incidents can
be sorted by distance, incident, or A-Z. When a route is active, the
system will automatically display traffic incidents on route. If there are
not incidents on the current route, the system will indicate that and
switch to the Other Traffic Places screen which will allow selection of
Traffic near My Home, Traffic Near Favorite Destination, or My Traffic
Places. These selections refer to locations previously entered into the
system.
Navigation features
64SeeEnd User License Agreementat the end of this book
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)
9.1 End User Terms Required by Tele Atlas North America, Inc.
The TeleNav Software utilizes software licensed to TeleNav by Tele Atlas
North America, Inc. (“Tele Atlas”). You may use this software (the “Tele
Atlas Software”) as part of the TeleNav Software subject to the following
terms and conditions:
•You may only use the Tele Atlas Software for internal business or
personal uses.
•Your use of the Tele Atlas Software is otherwise limited by the scope
of the license agreement between Tele Atlas and TeleNav.
•The Tele Atlas Software is the confidential information of Tele Atlas.
•You are prohibited from making any unauthorized copies of the Tele
Atlas Software.
•You are prohibited from removing or obscuring any copyright or
trademark notice, or restrictive legend with respect to the Tele Atlas
Software.
•The liability of Tele Atlas and its suppliers is limited by the limitation
of liability provision set forth above.
•The Tele Atlas Software is provided “as is” and on a “with all faults
basis”, and Tele Atlas and its suppliers expressly disclaim all other
warranties, express or implied, including but not limited to the implied
warranties of non-infringement, merchantability, satisfactory quality,
accuracy, title and fitness for a particular purpose. No oral or written
advice or information provided by Tele Atlas or any of its agents,
employees or third party providers shall create a warranty, and you
are not entitled to rely on any such advice or information. This
disclaimer is an essential condition of this Agreement.
In the event that you are a government entity, the following provisions
apply to you:
U.S. GOVERNMENT RIGHTS. If you are an agency, department, or other
entity of the United States Government, or funded in whole or in part by
the United States Government, then use, duplication, reproduction,
release, modification, disclosure or transfer of this commercial product
and accompanying documentation, is restricted in accordance with the
LIMITED or RESTRICTED rights as described in DFARS 252.227-
7014(a)(1) (JUN 1995) (DOD commercial computer software definition),
DFARS 227.7202[not ]1 (DOD policy on commercial computer software),
FAR 52.227-19 (JUN 1987) (commercial computer software clause for
civilian agencies), DFARS 252.227-7015 (NOV 1995) (DOD technical data
– commercial items clause); FAR 52.227-14 Alternates I, II, and III (JUN
End User License Agreements
81
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)
911 Assist™ ................................44
A
Accessing and using your USB
port ..............................................30
Ambient mood/lighting ...............55
AM/FM .........................................16
A/V inputs ....................................35
C
Cleaning the touchscreen ..........10
Customizing your home screen ...4
D
Display settings ...........................54
E
End user license agreement ......69
H
HD Radio™ .................................18
Help ................................................9
I
Infotainment display .....................7
K
Keyless entry system
programming entry code .........55
M
Map icons ....................................63
Map mode ....................................61N
Navigation features .....................56
Notifications ................................54
P
Pairing other phones ..................40
Pairing your phone for the first
time ..............................................37
Phone dependent features .........37
Privacy information ....................11
Q
Quick touch buttons ...................64
R
Rear view camera display ..........55
S
Safety information ......................10
Satellite Radio .............................25
SD card ..................................28, 56
Setting a destination ..................56
Setting the clock ...........................6
SIRIUSsatellite radio ...............22
SIRIUS Travel Link .....................66
Supported media file types ........33
SYNCServices ...........................48
System settings ...........................54
T
Text messaging ...........................40
Index
86
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)