2011 Lexus IS F seat memory

TABLE OF CONTENTSIndex
IS F_EE
2
1-1. Key information
Keys ..................................... 32
1-2. Opening, closing and locking
the doors and trunk
Smart entry & start system ... 36
Wireless remote control ....... 50
Doors .................................... 52
Trunk .................................... 57
1-3. Adjustable components
(seats, mirrors,
steering wheel)
Front seats ............................ 61
Driving position memory ..... 62
Seat position memory........... 66
Head restraints...................... 68
Seat belts .............................. 70Steering wheel ...................... 76
Anti-glare inside rear view
mirror ................................. 78
Outside rear view mirrors .... 80
1-4. Opening and closing the
windows and moon roof
Power windows .................... 82
Moon roof ............................ 85
1-5. Refueling
Opening the fuel tank cap .... 89
1-6. Theft deterrent system
Engine immobilizer system.. 92
Double locking system ......... 96
Alarm ................................... 97
1-7. Safety information
Correct driving posture ...... 103
SRS airbags ........................ 105
Child restraint systems ....... 116
Installing child restraints .... 124
Airbag manual on/off
system .............................. 133
1Before driving
For vehicles with a navigation system, refer to the “Navigation System
Owner’s Manual” for information regarding the equipment listed below.
• Navigation system
• Air conditioning
• Climate control
• Lexus parking assist-sensor• Audio/video system
• Rear window and outside rear
view mirror defogging

IS F_EE
12
Driving position memory
switches
Seat position memory
switches
P. 62
P. 66
Door lock switches
P. 52
Outside rear view
mirror switches
P. 80
Window lock switch P. 82
Power window switches P. 82
Pictorial indexInterior
(Left-hand drive vehicles)
B
Inside door lock buttons P. 52

IS F_EE
20
Driving position memory switches
Seat position memory switches
P. 62
P. 66Door lock switches
P. 52
Outside rear view mirror
switches
P. 80
Window lock switch P. 82
Power window switches P. 82
Pictorial indexInterior
(Right-hand drive vehicles)
B
Inside door lock buttons P. 52

1Before driving
31
IS F_EE
1-1. Key information
Keys ................................... 32
1-2. Opening, closing and locking
the doors and trunk
Smart entry & start system. 36
Wireless remote control ..... 50
Doors .................................. 52
Trunk .................................. 57
1-3. Adjustable components
(seats, mirrors,
steering wheel)
Front seats .......................... 61
Driving position memory ... 62
Seat position memory ........ 66
Head restraints ................... 68
Seat belts ............................ 70
Steering wheel.................... 76
Anti-glare inside rear view
mirror ............................... 78
Outside rear view mirrors .. 801-4. Opening and closing the
windows and moon roof
Power windows.................. 82
Moon roof .......................... 85
1-5. Refueling
Opening the fuel tank cap .. 89
1-6. Theft deterrent system
Engine immobilizer
system .............................. 92
Double locking system ...... 96
Alarm ................................. 97
1-7. Safety information
Correct driving posture .... 103
SRS airbags...................... 105
Child restraint systems...... 116
Installing child restraints . 124
Airbag manual on/off
system ............................ 133

62
1-3. Adjustable components (seats, mirrors, steering wheel)
IS F_EE
Driving position memory (driver’s seat)
Your preferred driving position (the position of the driver's seat, steer-
ing wheel and outside rear view mirrors) can be memorized and
recalled with the touch of a button. It is also possible to set this func-
tion to activate automatically when the doors are unlocked.
Three different driving positions can be entered into memory.
Entering a position to memory
Turn the “ENGINE START STOP” switch to IGNITION
ON mode.
Adjust the driver’s seat, steering wheel, and outside rear
view mirrors to the desired positions.
Push the “SET” button, then
within 3 seconds push button
“1”, “2” or “3” until the sig-
nal beeps.
If the selected button has
already been preset, the pre-
viously recorded position
will be overwritten.
Recalling the memorized position
Check that the shift lever is set in P.
Turn the “ENGINE START STOP” switch to IGNITION
ON mode.
Push button “1”, “2” or “3”
to recall the memorized posi-
tion.
STEP1
STEP2
STEP3
STEP1
STEP2

63
1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
IS F_EE
Linking driving position memory with door unlock operation
Record your driving position to button “1”, “2” or “3” before per-
forming the following.
Using the wireless remote control
Turn the “ENGINE START STOP” switch OFF and close
the driver's door.
While pressing the desired but-
ton (“1”, “2” or “3”), push
on the wireless remote control
until the signal beeps.
The driving position is recalled
when the driver's door is
unlocked using the entry func-
tion or wireless remote control
and the driver's door is opened.
To prevent unintended triggering of the alarm, open and close a
door once after a driving position has been recorded. (If a door is
not opened within 30 seconds after is pressed, the doors will be
locked again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm.
(P. 9 7 )
STEP1
STEP2

64
1-3. Adjustable components (seats, mirrors, steering wheel)
IS F_EEUsing the door lock switch
Carry only the key (including the card key
) to which you want
to link the driving position. If 2 or more keys are in the vehicle,
the driving position cannot be linked properly.
Turn the “ENGINE START STOP” switch OFF and close
the driver's door.
While pressing the desired but-
ton (“1”, “2” or “3”), press the
lock or unlock side on the
driver’s door lock switch until
the signal beeps.
The driving position is recalled
when the driver's door is
unlocked using the entry func-
tion or wireless remote control
and the driver's door is opened.
: If equipped
STEP1
STEP2
Canceling the linked door unlock operation
Turn the “ENGINE START STOP” switch OFF and close the
driver's door.
Using the wireless remote control: While pushing the “SET” but-
ton, press on the wireless remote control until the signal
beeps.
Using the door lock switch: While pressing the “SET” button, press
the lock or unlock side on the door lock switch until the signal
beeps.
Operating the driving position memory after turning the “ENGINE START
STOP” switch OFF
Memorized positions (except for the steering wheel position) can be acti-
vated up to 180 seconds after the driver’s door is opened and another 60 sec-
onds after it is closed again, even after turning the “ENGINE START
STOP” switch OFF.
STEP1
STEP2

66
1-3. Adjustable components (seats, mirrors, steering wheel)
IS F_EE
Seat position memory (front passenger’s seat)
Your preferred front passenger seat position can be memorized and
recalled with the touch of a button.
Three different seat positions can be entered into memory.
Entering a position to memory
Turn the “ENGINE START STOP” switch to IGNITION
ON mode.
Adjust the front passenger seat to the desired position.
Push the “SET” button, then
within 3 seconds push button
“1”, “2” or “3” until the sig-
nal beeps.
If the selected button has
already been preset, the pre-
viously recorded position
will be overwritten.
Recalling the memorized position
Check that the shift lever is set in P.
Push button “1”, “2” or “3”
to recall the memorized posi-
tion.
STEP1
STEP2
STEP3