2011 Lexus CT200h ad blue

398
3-3. Using the Bluetooth® audio system
CT200h_EE (OM76041E)
Changing the registered name of a portable player
Select “Change Name” using .
Select the desired portable player name to be changed using
.
Select “Record Name” using , and say the new
name after the beep.
The name to be registered will be repeated aloud.
Select “Confirm” using .
STEP1
STEP2
STEP3
STEP4

399
3-3. Using the Bluetooth® audio system
3
Interior features
CT200h_EE (OM76041E)
Listing the registered portable players
Select “List Audios” using . The list of registered portable
players will be read aloud.
When listing is complete, the system returns to “BTA Setup”.
Changing the passkey
Select “Set Passkey” using .
Select a 4 to 8-digit number using .
The number should be input 1 digit at a time.
When the entire number to be registered as a passkey has
been input, press again.
If the number to be registered has 8 digits, pressing of the knob is
not necessary.
STEP1
STEP2
STEP3

400
3-3. Using the Bluetooth® audio system
CT200h_EE (OM76041E)
Deleting a registered portable player
Select “Delete Audio” using .
Select the desired portable player to be deleted using
.
If the portable player to be deleted is paired as a Bluetooth
® phone,
the registration of the cellular phone can be deleted at the same
time.
When “Del Phone?” is displayed, select “Yes” or “No”
using . (Bluetooth
® phone P. 406)
The number of portable players that can be registered
Up to 2 portable players can be registered in the system.
STEP1
STEP2
STEP3

401
3-3. Using the Bluetooth® audio system
3
Interior features
CT200h_EE (OM76041E)
Bluetooth® audio system setup
System setup items and operation procedures
To enter the menu of each setting, follow the steps below.
Press the off-hook switch (P. 412) and select “Setup”
using .
Select “System Setup” using .
Select one of the following items using :
Setting voice guidance volume
“Guidance Vol” (P. 429)
Displaying the Bluetooth
® device address and name
“Device Name” (P. 429)
Initializing the system
“Initialize” (P. 430)
STEP1
STEP2
STEP3

402
CT200h_EE (OM76041E)
3-4. Using the hands-free phone system (for cellular phones)
Hands-free system for cellular phone
The hands-free system is a function that allows you to use your cellu-
lar phone without touching it.
This system supports Bluetooth
® cellular phones. Bluetooth® is a
wireless data system that allows the cellular phone to wirelessly con-
nect to the hands-free system and make/receive calls.
Vehicles with a navigation system
Refer to the “Navigation System Owner’s Manual”.
Vehicles without a navigation system
Hands-free system quick guide
Setting a cellular phone. (P. 413)
Adding an entry to the phonebook. (Up to 20 names can
be stored.) (P. 431)
Dialing by inputting a name. (P. 418)
Hands-free function list
TitlePage
Using the hands-free system
Using the hands-free phone system for
the first time
P. 4 1 3
STEP1
STEP2
STEP3

405
3-4. Using the hands-free phone system (for cellular phones)
3
Interior features
CT200h_EE (OM76041E)
Conditions under which the system will not operate
If using a cellular phone that does not support Bluetooth®.
If the cellular phone is switched off.
If you are outside service range.
If the cellular phone is not connected.
If the cellular phone’s battery is low.
If the cellular phone is behind the seat or in the glove box or console box
If metal is covering or touching the phone
Signal status
This display may not correspond exactly with the cellular phone itself.
When using the hands-free system
The audio system and voice guidance are muted when making a call.
If both parties speak at the same time, it may be difficult to hear.
If the incoming call volume is overly loud, an echo may be heard.
Try to face toward the microphone as much as possible when speaking.
In the following circumstances, it may be difficult to hear the other
party:
• When driving on unpaved roads
• When driving at high speeds
• When a window is open
• When the air conditioning is blowing directly on the microphone
• When the air conditioning is set to high

406
3-4. Using the hands-free phone system (for cellular phones)
CT200h_EE (OM76041E)
When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improp-
erly accessed. (P. 430)
About Bluetooth®
Compatible models
Compatible with HFP (Hands Free Profile) Ver. 1.5 and OPP (Object Push
Profile) Ver. 1.1.
If your cellular phone does not support HFP, you cannot enter the Blue-
tooth
® phone. If your cellular phone supports OPP alone, you cannot use the
Bluetooth® phone.
Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

410
3-4. Using the hands-free phone system (for cellular phones)
CT200h_EE (OM76041E)
CAUTION
Caution while driving
Do not use a cellular phone or connect the Bluetooth
® phone.
NOTICE
To prevent damage to cellular phones
Do not leave cellular phones in the vehicle. The temperature inside the vehi-
cle may become high, resulting in damage to the phone.