2011 Lexus CT200h mirror

22
CT200h_EE (OM76041E)
Pictorial indexInstrument panel
(Right-hand drive vehicles)
Headlight switch
Turn signal lever
Fog light switch P. 232
P. 213
P. 237
Pre-crash braking off switch P. 293
Parking brake pedal P. 214
Hood lock release lever P. 481
Tilt and telescopic steering control lever
P. 111
Audio system*2 P. 325
Air conditioning system*2
P. 312
Rear window and outside rear view mir-
ror defoggers
P. 323
Glove box
P. 442
Power (ignition) switch
P. 196Windshield wipers and
washer switch
Rear window wiper and
washer switch

P. 239
P. 245
Gauges and meters
Multi-information displayP. 216
P. 226
Navigation system*1 Emergency flasher
switch
P. 550
Instrument panel
light control
dial
P. 218
Outside rear
view mirror
switches
P. 114
Clock*2 P. 450

1Before driving
33
CT200h_EE (OM76041E)
1-4. Adjustable components (seats,
mirrors, steering wheel)
Front seats .......................... 94
Rear seats ........................... 96
Driving position memory ... 98
Head restraints ................. 101
Seat belts .......................... 104
Steering wheel.................. 111
Inside rear view mirror..... 112
Outside rear view mirrors 114
1-5. Opening and closing the
windows and moon roof
Power windows ................ 119
Moon roof ........................ 123
1-6. Refueling
Opening the fuel tank cap 1271-7. Theft deterrent system
Immobilizer system ......... 131
Double locking system .... 136
Alarm ............................... 138
1-8. Safety information
Correct driving posture .... 146
SRS airbags...................... 148
Airbag manual on-off
system ............................ 160
Child restraint systems..... 163
Installing child restraints . 173

94
CT200h_EE (OM76041E)
1-4. Adjustable components (seats, mirrors, steering wheel)
Front seats
Manual seat
Seat position adjustment
lever
Seatback angle adjustment
lever
Vertical height adjustment
lever (for driver’s side) (if
equipped)
Power seat (if equipped)
Seat position adjustment
switch
Seat cushion (front) angle
adjustment switch
Vertical height adjustment
switch
Seatback angle adjustment
switch
Lumbar support adjust-
ment switch

95
1-4. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
CT200h_EE (OM76041E)
CAUTION
Seat adjustment
To reduce the risk of sliding under the lap belt during a collision, do not
recline the seat more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen, or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
Adjustments should not be made while driving as the seat may unexpect-
edly move and cause the driver to lose control of the vehicle.
After adjusting the seat, make sure that the seat is locked in position.
(manual seat)

96
1-4. Adjustable components (seats, mirrors, steering wheel)
CT200h_EE (OM76041E)
Rear seats
Returning the seatbacks
To avoid trapping the seat belt
between the seat and the inside
of the vehicle, pass the seat belt
inside the seat belt guide and
then return the seatback
securely to the locked position.
The seatbacks of the rear seats can be folded down.
Pull up the seatback lock
release lever until the lock is
released.
Seat belt

97
1-4. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
CT200h_EE (OM76041E)
CAUTION
When folding the rear seatbacks down
Observe the following precautions. Failure to do so may result in death or
serious injury.
Do not fold the seatbacks down while driving.
Stop the vehicle on level ground, set the parking brake and shift the shift
position to P.
Do not allow anyone to sit on a folded seatback or in the luggage compart-
ment while driving.
Do not allow children to enter the luggage compartment.
When returning the rear seatback to the upright position
Do not put your hand on the seat belt guide.
Doing so may cause you to trap your hand between the guide and the pillar,
causing an injury.
After returning the rear seatback to the upright position
Observe the following precautions. Failure to do so may result in death or
serious injury.
Check that the seat belts are not twisted or caught in the seatback.
Make sure that the seatback is securely
locked in position by lightly pushing it
back and forth.
If the seatback is not securely locked,
the red marking will be visible behind
the seatback lock release lever. Make
sure that the red marking is not visible.

98
1-4. Adjustable components (seats, mirrors, steering wheel)
CT200h_EE (OM76041E)
Driving position memory

: If equipped
Your preferred driving position (the position of the driver’s seat and
outside rear view mirrors) can be memorized and recalled with the
touch of a button. It is also possible to set this function to activate
automatically when the doors are unlocked.
Three different driving positions can be entered into memory.
Entering a position to memory
Turn the “POWER” switch to ON mode.
Adjust the driver’s seat and outside rear view mirrors to
the desired positions.
While pressing the “SET”
button, or within 3 seconds
after the “SET” button is
pressed, press button 1, 2 or 3
until the signal beeps.
If the selected button has
already been preset, the pre-
viously recorded position
will be overwritten.
Recalling the memorized position
Turn the “POWER” switch to ON mode.
Press button 1, 2 or 3 to
recall the desired position.
STEP1
STEP2
STEP3
STEP1
STEP2

99
1-4. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
CT200h_EE (OM76041E)
Linking driving position memory with door unlock operation
(driver’s seat only)
Record your driving position to button 1, 2 or 3 before performing
the following:
Carry only the key (including the card key) to which you want to
link the driving position. If 2 or more keys are in the vehicle, the
driving position cannot be linked properly.
Close the driver’s door and turn the “POWER” switch to
OFF mode.
Press the desired button (1, 2 or
3) to recall the position. Then,
while keep pressing the button,
press the driver’s door lock
switches (either lock or unlock)
until the signal beeps.
The driving position is recalled
when the driver’s door is
unlocked using the entry func-
tion or wireless remote control
and the driver’s door is opened.
STEP1
STEP2