2011 Lancia Delta technical data

6
TECHNICAL SPECIFICATIONS251
Identification data .......................................................... 252
Engine codes – bodywork versions .................................. 254
Engine ............................................................................ 255
Fuel supply system ......................................................... 257
Transmission .................................................................. 258
Brakes ............................................................................. 258
Suspensions .................................................................... 259
Steering ........................................................................... 259
Wheels ............................................................................ 260
Dimensions ..................................................................... 265
Performance ................................................................... 266
Weights ........................................................................... 267
Capacities ....................................................................... 269
Fluids and lubricants ...................................................... 271
Fuel consumption ........................................................... 273
CO
2emissions ................................................................ 274

252TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA
The vehicle identification details are, fig. 1:
1 V.I.N. plate (located in the right side of the front
cross member);
2 Bodyshell marking (located on the passenger com-
partment floor, next to the passenger side front seat);
3 Bodywork paint identification plate (located in the left
side of the front crossmember);
4 Engine marking (located on the left rear section, gear-
box side).V.I.N. PLATE fig. 2
This plate is fitted to the engine compartment front cross-
member and contains the following data:
B Type-approval number.
C Vehicle type identification code.
D Chassis number.
E Maximum authorised weight of vehicle fully laden.
F Maximum authorised weight of vehicle fully laden
plus trailer.
G Maximum authorised weight on first axle (front).
H Maximum permitted weight on second (rear) axle.
I Engine type.
L Bodywork version code.
M Spares number.
N Correct value of smoke coefficient (for diesel engines).
fig. 1L0E0116mfig. 2L0E0117m

TECHNICAL SPECIFICATIONS253
6
CHASSIS MARKING fig. 3
This is printed on the passenger compartment floor, near
the right front seat. Slide the flap A forward to access.
The marking includes:
❍vehicle type (ZAR 844000)
❍chassis numberBODYWORK PAINT IDENTIFICATION PLATE fig. 4
This plate is applied inside the bonnet and shows the fol-
lowing data:
A Paint manufacturer.
B Colour name.
C Lancia colour code.
D Respray and touch-up colour code.
ENGINE MARKING
The engine marking is stamped on the cylinder block and
includes the model and the chassis progressive number.
fig. 3L0E0118mfig. 4L0E0119m

The data contained in this publication is intended merely as a guide. Lancia reserves the right to modify the models and versions described
in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your Lancia dealer.
Printed in recycled paper without chlorine.
ENGLISH