2
Vehicle access\bEngine starting
Jaguar Smart Key
Keyless entry
Leaving the vehicle
The vehicle WILL NOT automatically lock or arm
the alarm.
To lock and alarm the vehicle with a keyless action
the Jaguar Smart Key must be outside the vehicle.
Press the door handle button once to single\block.
Alternatively, use the Jaguar Smart Key.
Entering the vehicle
With keyless entry, operation of a locked door
handle or pressing the trunk release button will
allow access if the Jaguar Smart Key is within
approximately 39
inches (\fm) of that
entry point.
The Jaguar Smart
Key buttons do not
need to be pressed and it can be concealed in
clothing or even carried in a non metallic carrier.
The Jaguar Smart Key buttons can still be used
to unlock the vehicle.
Drive away door locking
When enabled, the trunk and doors will
automatically lock when the vehicle's forward
speed exceeds 5 mph (7 km/h).
This feature can be disabled/enabled via the
touch\bscreen. From the
Homescreen, select
Vehicle, then Veh. settings, thenSecurity.
Unlocking mode alternatives
Single point entry will disarm the alarm and
unlock only the driver’s door with a single press. A
second press unlocks the passenger door and
trunk.
Multi point entry will disarm the alarm and unlock
both doors and trunk with a single press.
To change between modes, press the lock and
unlock buttons simultaneously for three seconds.
The hazard lamps will flash twice to confirm the
change.
• Press once to lock the vehicle and arm the alarm.
• Press and hold to close any open windows (Global closing if enabled).
• Press once to disarm the alarm, unlock both doors and unlock the trunk.
• Press and hold to open the windows (Global opening if enabled) .
• Press once to switch the headlamps on for 25 seconds. Press again to
switch off.
• Press to disarm the alarm and unlock the trunk.
• Press and hold or press three times in three seconds to activate/cancel the
panic alarm .
1.Emergency key blade release button.
2. Emergency key blade.
Note: See the Owner’s Handbook for use.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:23 Page 2
WhenReverse is selected, the rear and front
parking aids are activated.
The touch\bscreen will display a representation of
your vehicle and indicates any obstruction
detected. A coloured bar will show the
approximate distance from the vehicle to the
obstruction. An audible alert is also triggered
and will increase in frequency as the obstruction
is approached.
When moving forward into a space, enable the
sensors with the parking aid switch.
Alternatively, first select Reverse thenDrive.
Volume of the audible alert can be changed via
the touch\bscreen. From the Home screen, select
Vehicle, then Veh. settings, thenParking .
Parking aid will cancel when forward speed
exceeds \f0 mph (\f6 km/h).
\f\f
Parking aids
Cancelling the pop up screen
To return to the previous screen view before
parking assist is automatically cancelled, touch the
screen within the pop\bup area.
Parking aid care points
Sensors may activate when water, snow or ice are
detected on the surface of the sensors. This is
entirely normal and regular cleaning will assist
performance.
Parking aid switch
1. Press to disable the parking aid. Press again to enable.
An LED in the switch illuminates whenever
the system is on.
Garage door opener
The button set 1in the roof console can be
programmed to transmit radio frequencies that
can operate external devices such as garage
doors, entry gates, security systems, etc.
See the Owner’s Handbook for full operating
instructions.
jjm 18 96 30 101:XK NAS 10MY.qxd 04/09/2008 15:24 Page 11Parkingaid alert 1 1
