2011 JAGUAR XF ECO mode

2
J A G U A R X FJ A G U A R X F J A G U A R X F
Vehicle access
Jaguar Smart Key
Emergency key access
If there is a problem with the Smart Key and it will not
unlock the vehicle, use the emergency key access
procedure. Press the Smart Key release button
Remove the key blade.
Insert the blade into the slot beneath the front left\b
hand door lock cover. Lift slightly and twist to remove
the cover. Insert the key into the exposed lock and
turn it towards the rear of the vehicle then release it
to unlock.
If the vehicle security system was previously armed
with the Smart Key, the alarm will sound. To disarm
the alarm, press the START STOPbutton while the
Smart Key is inside the vehicle.
Unlocking mode alternatives
Single\bpoint entry allows only the driver’s door to unlock with a single press. A second press unlocks all other doors
and trunk.
Multi\bpoint entry will unlock all doors and trunk with a single press.
To change between modes, with the vehicle unlocked, press the lock and unlock buttons simultaneously for three
seconds. The hazard warning lamps will flash twice to confirm the change.
• Press once to lock the vehicle and arm the exterior (perimetric) alarm.
• Multi\bpoint entry \b Press once to disarm the alarm, unlock all doors and unlock
the trunk.
• Press and hold to unlock all doors and open the windows and sunroof (Global
opening).
• Press once to switch the headlamps on for 25 seconds. Press again to
switch off.
• Press to open only the luggage compartment. The rest of the security
system remains active.
• Press and hold for three seconds to activate/cancel the panic alarm.
1
2
To unlock the vehicle and disarm the alarm, simply
press a door handle button or luggage compartment
release button while the Smart Key is within 3 ft (\f
metre) of the vehicle.
To lock the vehicle and arm the alarm, first ensure
that the Smart Key is outside the vehicle but within
3ft (\f metre).
Press a door handle button once to single lock. Press
it twice within three seconds to double lock.Rear seat release handles
The split fold rear seats have release handles located
inside the trunk. Pull to release one or both seat
backs and fold forward. Head restraints can be
removed if required.
Keyless entry/exit
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 2

Starting and driving
J A G U A R X FJ A G U A R X F J A G U A R X F
5
Ignition on:
• With the Jaguar Smart Key inside the vehicle,
press the START STOP button to switch on
ignition.
• A second press will switch off the ignition.
Engine start
• The selector lever must be in Park orNeutral
position to enable engine starting.
• With the footbrake depressed, press and release the START STOP button to start the engine.
• Press again to stop the engine and switch off the ignition.
Rolling start
If the engine is switched off while the vehicle is
moving, it can be restarted by selecting Nposition
then pressing the START STOPbutton.
Operating note
The engine will continue to run even if the Smart
Key is removed from the vehicle by more than 3ft
(\f metre). However, if the engine is stopped, it
cannot be restarted until the Smart Key is returned
to the vehicle.
Engine start and stopSee page 3, item 20
Gearshift interlock
The brake pedal must be
depressed before the
selector can be moved
from the Park position.
Maintain brake pressure
until a gear is selected.
Select Pbefore switching
off the engine. However, if
the engine is switched off
with Reverse, Drive or
Sport selected, the
selector will automatically
return to Pwhile retracting.
P R N D S
STARTENGINESTOP
DSC
Automatic gear selection
Select Dfor fully automatic gear changes.
Sport mode
This is an automatic gear change mode, however,
change points are modified to make full use of engine
power.
Press the selector down and rotate from Dto Sport.
Manual gear changes
Manual gear change mode is effective when rapid
acceleration and engine braking are required.
• To shift down, briefly pull the left (\b) paddle.
• To shift up, briefly pull the right (+) paddle.
When the paddles are used in D,gear selection will
revert to automatic if use of the paddles is not
maintained. With Sselected, continuous manual
operation is initiated if the paddles are used.
NOTE: To return to automatic operation pull and hold
the right hand paddle for two seconds.
Operating note
If the engine is switched off with Neutral selected,
automatic selection of Pis delayed for \f0 minutes.
DO NOT use this feature to enable towing of the
vehicle. Refer to Vehicle recovery in the Owner’s
Handbook.
TransmissionSee page 3, items 2,6and 14
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 5

8
J A G U A R X FJ A G U A R X F J A G U A R X F
Driving aids
Winter mode, Dynamic mode and Dynamic Stability
Control (DSC) allow the driver to more finely tune the
vehicle driving characteristics to suit prevailing
conditions.
Winter mode . Use in slippery road conditions.
Selects 2nd gear for driving away, moderates engine
response and modifies gear change strategy to
ensure maximum possible traction is achieved.
Dynamic mode. Optimises vehicle systems to
deliver a high performance driving experience. If
Sport mode is now used with paddle gear selection,
there is no automatic gear change, even if the rev
limit is reached. Dynamic mode remains selected for
six hours after the engine is switched off
DSC. The default condition at engine start is DSC
on and is designed to control vehicle stability.
TracDSC is an alternative setting that optimises the
DSC settings for maximum traction in difficult
conditions. TracDSC enables a more involving and
focused driving experience. To select TracDSC, press
and release the button. Touch again to return to DSC.
To turn DSC off, press for more than \f0 seconds.
Message center The message center displays the
JaguarDrive Selector position,
P,R,N,D orS, the manual mode
gear selections 1to 6and the
JaguarDrive Control mode
selection.
When TracDSC is selected, the DSC warning lamp
will illuminate and the message center will briefly
display TracDSC\b
When DSC OFF is selected, the DSC warning lamp
will illuminate and the message center will display
DSC OFF until DSC is reinstated.
Driving mode settings
Refer to the Owner’s Handbook section, Stability
control, for examples of JaguarDrive settings.
1
2
3
JaguarDrive controlSee page 3, items 1\b,18and 1\f
Door mirrors and blind spot monitoring
Mirror dip when reversing
This feature can be used to improve lower side views
while reversing. It can be enabled or disabled via the
touch\bscreen. From the Homescreen, select Vehicle,
then Veh\b settings, then Parking.
To set a dip position:
• with the electric parking brake on, select reverse gear
• adjust the mirror position to view the lower rear kerb and vehicle.
Subsequently, each time reverse gear is selected, the
set dip position will be automatically selected. The
mirrors will return to their normal position when
another gear is selected.Blind spot monitoring
Each mirror displays amber icons to warn of
overtaking vehicles in adjacent lanes. The monitored
area extends approximately 20 ft (6 meters) behind
your rear wheels and 8.2 ft (2.5 meters) to the sides.
It switches on automatically at speeds above \f0 mph
(\f6km/h) while in a forward gear. An amber dot
illuminates when speed is below the threshold.
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 8

Turn the audo system on. From the touch\bscreen
menu, select AudiothenAM/FM . Subsequent
touches of AM/FMwill scroll through FM1, FM\fand
AM.
Use the Seek Up or Seek Down controls to manually
find stations.
Touch and hold any of the station preset softkeys to
store a station. Alternatively, touch and hold the
Autostore icon.
Autostore can automatically select and store up to
nine stations. Touch any preset softkey to listen to a
stored sation.
Touch Settings for additional tuner features and
sound settings.
J A G U A R X F J A G U A R X F J A G U A R X F
Audio and touchscreen
1\b
Settings
T
emp.sync. External
62F
Auto
5860F.5
F
Auto
A/C
ON.5
Climate
12:26pm
Auto3
2
1
4564
9
8
7
Touchscreen damage
The touch\bscreen requires only light touches.
Excess pressure could result in damage.
Eject CD. Hold to eject all CD’s.
Press repeatedly for available audio sources.
Press for audio on/off. Rotate for volume.
Short press for audio settings, long press for
volume presets.
Seek Down and Up buttons for previous/next
radio station or CD track. Hold to enter
manual seek mode.
\bTouch any screen softkey to make a selection.
Return to ‘Home’ screen.
Load CD’s. Follow screen instructions.
Press repeatedly for touch\bscreen on/off and
screen saver options.
AM/FM and HD radio
HD radio
HD radio can provide much improved audio quality
when compared to normal AM/FM reception. It can
also provide additional information about available
channel services.
HD radio broadcasts are synchronized with AM/FM
broadcasts. The great advantage here is that when
HD radio is activated and standard AM/FM is in use,
if an HD signal is detected the radio will gradually
transfer to the digital broadcast. No action is required
although a difference in volume may be noticed.
When an HD radio channel is being received, the
station name is prefixed with HD.
If the prefix is HD1, further sub channels are available
from that channel broadcaster.
To enable HD radio:
1\b Select the Settingssoftkey on the Audiomenu
screen.
\f\b Select HD On to activate.
In areas of poor reception, automatic switching
between HD and AM/FM will be more frequent. If this
becomes unacceptable, either tune to an alternative
channel or switch HD radio off via the Settings
softkey.
Audio controlsSee page 3, items 11, 12and21
SAT radioAutostore
Octane
OctaneFM197.0
190 WFAN
Bridge Pulse Nation
102.4 100.6
WCBS
Portable audio
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 10

Heating and ventilation
J A G U A R X FJ A G U A R X F J A G U A R X F
13
Climate controlSee page 3, item13
AUTO. Automatic mode. The climate control will
adjust air conditioning, blower speed, air
intake and airflow distribution to maintain the
selected temperature(s). Fogging will be reduced.
Left and right hand sides temperature controls.
Temperature is displayed on the touch\bscreen.
Blower speed. Rotate to adjust airflow speed
through the vents.
DEF. Fastest method to remove frost or heavy
fogging from the windshield.
F\b Heated windshield.
\bR. Heated rear screen.
Recirculation. Helps prevent fumes from entering.
Touchscreen controls
To access touch\bscreen control, touch Climateon
the Home menu screen.
Auto. Automatic mode. The climate control will
adjust air conditioning, blower speed, air
intake and airflow distribution to maintain the
selected temperature(s). Fogging will be reduced.
Air distribution to windshield, face or feet.
Temp sync. Synchronises all front and rear
settings to match the driver’s.
Front seats. Temperature and ventilation settings.
There are three settings each for heating and
cooling. Touch the up arrow for heated ventilation
and for raising temperature. Touch the down
arrow for cooled ventilation and for lowering
temperature.
The first touch of either arrow will initiate the
maximum setting. The setting will be indicated by
the number of illuminated red or blue LED’s.
Heated only seats (not shown)
There are three temperature settings. Touch the
seat icon to initiate.
• First touch \b maximum heat.
• Second touch \b intermediate.
• Third touch \b minimum.
• Fourth touch \b heating off.
The setting will be indicated by the number of
illuminated red LED’s.
Blower speed. For adjusting air flow speed
through the vents.
\bHeated steering wheel. Touch to turn on heat.
Touch again to turn off.
OFF. Turns climate control off and is replaced
with the ONsoftkey.
A/C. Select for economy mode. Turns off the air
conditioning compressor.
Settings. For personal settings.
Settings
T
emp.sync. External
62FAuto
5860F.5
F
AutoA/C
ON.5
Climate
12:26pm
Auto3
2
1
4564
9
8
7
Operating note
AUTO is the recommended operating mode. This
will help prevent fogging and reduce odours.
External water deposits
The air conditioning system removes moisture from
the air and deposits the excess water beneath the
vehicle. Puddles may form but this is normal and
no cause for concern.
Operating note
Seat heating and ventilating will operate only while
the engine is running. This is to prevent the battery
becoming discharged.
17645
2
3
JJM 18 96 40 111:XF 11MY.qxd 16/12/2009 08:57 Page 13