WW-66
< REMOVAL AND INSTALLATION >
FRONT WIPER ARM
FRONT WIPER ARM
Exploded ViewINFOID:0000000006220408
Removal and InstallationINFOID:0000000006220409
REMOVAL
1. Operate front wiper to move it to the auto stop position.
2. Open the hood.
3. Remove front wiper arm caps.
4. Remove front wiper arm mounting nuts.
5. Raise front wiper arm, and then remove front wiper arm from the vehicle.
INSTALLATION
1. Clean wiper arm mount as shown in the figure to prevent nuts
from being loosened.
2. Operate front wiper motor to move the front wiper to the auto stop position.
3. Adjust front wiper blade position. Refer to WW-66, "
Adjustment".
4. Install front wiper arm by tightening the mounting nuts.
5. Inject the washer fluid.
6. Operate front wiper to move it to the auto stop position.
7. Check that the front wiper blades stop at the specified position.
8. Install front wiper arm caps.
AdjustmentINFOID:0000000006220410
WIPER BLADE POSITION ADJUSTMENT
1. Front wiper blade RH 2. Front wiper arm RH 3. Front wiper arm cap
4. Front wiper drive assembly 5. Front wiper motor 6. Front wiper arm LH
7. Front wiper blade LH
Refer to GI-4, "
Components" for symbols in the figure.
JMLIA0940GB
ELH0717D
Revision: 2010 May2011 QX56
