2011 INFINITI M key

Air flow control :
Pushing the “
” button selects the air
outlet to:
: Air flows from center and side ventila- tors.
: Air flows from center and side ventila-tors and foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
CLIMATE setting screen
Climate control settings can be changed on the
screen.
Push the CLIMATE button on the instrument
panel and turn the display to the Climate mode.
Heating (A/C OFF) :
The air conditioner does not activate in this
mode. When you need to heat only, use this
mode.
1. Push the “CLIMATE” button to on.
2. If the “A/C” indicator on the screen illu-
minates, select the “A/C” key. (The “A/C”
indicator will turn off.)
3. Push the temperature control button to set the desired temperature.
●The temperature of the passenger compart-
ment will be maintained automatically. Air
flow distribution and fan speed are also
controlled automatically.
● Do not set the temperature lower than the
outside air temperature. Otherwise the sys-
tem may not work properly.
● Not recommended if windows fog up.
Models with navigation system
SAA3002
Models without navigation system
SAA3148
4-34Monitor, climate, audio, phone and voice recognition systems
—
—
01/13/10—tbrooks


When the outside temperature decreases to
approximately23°F (0°C), the A/C function
does not activate even if the “A/C” indicator
light illuminates.
Dual control mode setting :
You can individually set the driver and front
passenger side temperature and air flow mode
using each temperature control button or
manual air flow control button.
1. Push the “CLIMATE” button to on.
2. By selecting the “DUAL” key, or when the passenger side temperature control but-
ton or manual air control button is
pushed, the “DUAL” indicator on the
screen will illuminate.
3. To turn off the passenger side tempera- ture control, select the “DUAL” key and
the “DUAL” indicator will turn off.
●The Dual control mode cannot be activated
when the air conditioner is in the front
defrosting mode “
”.
Automatic upper ventilator system :
In this mode, air from the center ventilators
flows both straight and upward in order to
control the cabin temperature without blowing
air directly on the occupants.
1. Push the “CLIMATE” button to on. 2. Select the “Upper Vent” key, and the
indicator on the screen will illuminate.
The air flow against the driver’s or pas-
senger’s upper body becomes gentle.
●Distribution between straight and upward
flows is determined automatically by the
climate control system. If you prefer strong
air flow against your upper body, select the
“Upper Vent” key to turn the indicator light
off.
● When the outside temperature decreases to
approximately 14°F (10°C), the “Upper
Vent” function does not activate. The Upper
Vent function will reactivate automatically
when ambient temperature is 14°F (10°C)
or above.
Monitor, climate, audio, phone and voice recognition systems4-35
—
—
03/02/10—pattie


The air recirculation mode cannot be activated
when the air conditioner is in the front defrost-
ing mode “
”.
Outside air circulation :
Push the intake air control “
” button to
change the air circulation from the intake air to
the outside air. The “
” indicator light will
turn off.
Automatic air intake control :
In the AUTO mode, the intake air will be con-
trolled automatically. To manually control the
intake air, push the intake air control “
”
button. To return to the automatic control mode,
push the intake air control “
” button for
approximately 2 seconds. The indicator lights
will flash twice, and then the intake air will be
controlled automatically.
CLIMATE setting screen
Climate control settings can be changed on the
screen.
Push the “CLIMATE” button on the instrument
panel and turn the display to the “Climate”
screen.
Heating (A/C off) :
The air conditioner does not activate in this
mode. When you need to heat only, use this
mode.
1. Push the “CLIMATE” button to on.
2. Push the “AUTO” button. (The “AUTO”
indicator on the screen will illuminate and
“AUTO” will appear on the display.) 3. If the “A/C” indicator illuminates, select
the “A/C” key. (The “A/C” indicator will
turn off.)
4. Push the temperature control button to set the desired temperature.
●Do not set the temperature lower than the
outside air temperature. Doing so may cause
the temperature to not to be controlled
properly.
● If the windows fog up, use dehumidified
heating instead of A/C off heating.
Dual control mode setting :
You can individually set driver and front pas-
senger side temperature and air flow mode
using each temperature control or manual air
flow control button.
1. Push the “CLIMATE” button to on.
2. By selecting the “DUAL” key, or when the passenger side temperature control but-
ton or manual air control button is
pushed, the “DUAL” indicator on the
screen will illuminate.
3. To turn off the passenger side tempera- ture control, select the “DUAL” key and
the “DUAL” indicator will turn off.
SAA2959
4-38Monitor, climate, audio, phone and voice recognition systems
—
—
01/12/10—pattie


●The Dual control mode cannot be activated
when the air conditioner is in the front
defrosting mode “
”.
Automatic upper ventilator system:
1. Push the “CLIMATE” button to on.
2. Select the “Upper Vent” key and the indicator on the screen will illuminate.
The air flow against the driver’s or pas-
senger’s upper body becomes gentle.
In this mode, air from the center ventilators
flows both straight and upward in order to
control the cabin temperature without blow-
ing air directly on the occupants.
Distribution between straight and upward flows
is determined automatically by the climate con-
trol system. If you prefer strong air flow against
your upper body, select “Upper Vent” key to
turn the indicator off.
When the outside temperature decreases to
approximately 14°F (10°C), the Upper Vent
function will not activate. The Upper Vent
function will reactivate automatically when am-
bient temperature is approximately 14°F
(10°C) or above.
Display Forest Air™ system setting screen :
The “Forest Air setting” screen will appear when
selecting the “Forest Air Setting” key. For the details about the Forest Air™ system
setting operation, see “Setting Forest Air™”
later in this section.
Display Forest Air™ Information screen :
The Forest Air™ system information screen will
appear when selecting the “Forest Air Info” key.
For details about the Forest Air™ system infor-
mation screen, see “Forest Air™ system Infor-
mation” later in this section.FOREST AIR™
The Forest Air™ system keeps the air inside the
vehicle clean using the automatic air intake
system and automatic ventilation. The Forest
Air™ system also makes the inside of the
vehicle more comfortable, using a combination
of the upper ventilator and center ventilators at
random.
*Forest Air™ is a trademark of Nissan Motor
Co., Ltd.
Main operation
Push the “” button.
(The “
” and “AUTO” indicator light on the
button will illuminate.) When the following functions and sensors are
turned on, the Forest Air™ system settings will
activate.
– Breeze Mode
–
Outside odor and exhaust gas detection sensor
– Inside Air Quality sensor
– Auto humidity control
The fan speed and air flow is automatically set
to the AUTO position.
●
The Forest Air™ system can be adjusted
and/or activated/deactivated for each func-
tion. For details of the Forest Air™ system
settings, see later in this section.
● When the “
” button is pushed while
the air conditioner is off, the air conditioner
will automatically activate.
● The Forest Air™ system automatically turns
off when the outside temperature is below
approximately 32°F (0°C). When the tem-
perature is below approximately 32°F (0°C),
the Forest Air system can not be turned on
when the
button is pressed. This is
not a malfunction. Push the
to reac-
tivate the system when the outside tempera-
ture is above approximately 32°F (0°C). The
Monitor, climate, audio, phone and voice recognition systems4-39
—
—
03/02/10—pattie


over-dry or moist enough to fog the windows.
Moreover, it detects potential fog before forma-
tion on the windows and operates to remove it.
●Push the “AUTO” or “
” button (The
“AUTO” or “
” indicator light on the
button will illuminate and “AUTO DEF” will
appear on the display.)
● The “Auto humidity control” function will not
operate if the fan speed or a vent outlet is
manually adjusted. (“AUTO DEF” will disap-
pear from the display.)
● When auto humidity control is turned off
while the Forest Air™ system is on, turn off
and on the Forest Air™ system, the auto
humidity control will activate again.
Setting Forest Air™
1. Push the “CLIMATE” button on the instru-
ment panel and turn the display to the
“CLIMATE mode” screen.
2. Select the “Forest Air Setting” key.
The Forest Air™ system settings screen is
displayed.
● No settings, except for auto humidity con-
trol, are available unless the “
” indi-
cator light on the button illuminates.
Breeze Mode ON/OFF :
When this item is turned to ON, the Breeze
Mode function will activate while the Forest
Air™ system operates. Fan Speed Variance :
Set the Breeze Mode fluctuation effect.
Select the “Fan Speed Variance” key and select
the “High” or “Low” key setting of the Breeze
Mode fluctuation effect.
Setting the fan speed to “High” allows a larger
fluctuation change.
Outside/Inside Air Mix :
This item allows the user to set priority between
the outside air circulation and air recirculation
modes.
Select the “Outside/Inside Air Mix” key and use
“
”or“” key to adjust priority.
Greater priority will be given to the air recircu-
lation mode when the indicator is closer to
“
”, and the outside air circulation mode
when the indicator is closer to “
”.
Auto Defogging Sensitivity :
This item allows the user to set the timing of the
automatic defogging activation function.
Select the “Auto Defogging Sensitivity” key and
select the “Slow” or “Fast” key.
When set to OFF, the automatic defogging func-
tion will turn off.
SAA2961
Monitor, climate, audio, phone and voice recognition systems4-41
—
—
03/02/10—pattie


Forest Air™ system Information
The present status of the Forest Air™ system
operation and the conditions of air inside and
outside of the vehicle can be checked.
Push the “CLIMATE” button on the instrument
panel and turn the display to the “CLIMATE
mode” screen and select the “Forest Air Info”
key.
1. Breeze Mode
The animation image of the Breeze Mode
function is displayed.
2. The condition of outside and inside air
The present condition of air inside and
outside the vehicle is indicated by color.
Blue: The air is clean.
Orange: The air is not clean.
3. Outside air circulation/Air recirculationarrow
The air flow of the outside air circulation and
air recirculation functions is indicated with
an arrow.
Blue arrow: The air is clean.
Orange arrow: The air is not clean.
4. Auto humidity control status
The condition of fog on the window is dis-
played. When the window starts to fog, the
color turns white.
5. Outside air circulation/Air recirculationdisplay
When the outside air circulation or air recir-
culation mode is automatically selected, ei-
ther “
”or“” is displayed. When
the outside air circulation or air recirculation
mode is manually selected, either “
”
or “
”, and “Manual” are displayed.
Ion control
This unit generates highly concentrated Plas-
macluster ion™ into the air blown from the
ventilators and reduces odor absorbed into the
interior trim.
When the air conditioner is turned on, the
system generates Plasmacluster ion™ auto-
matically.
The amount of Plasmacluster ion™ increases
according to the amount of air flow. When the
air flow is high, “
” is displayed on the
screen and when the air flow is low, the indica-
tion in the screen changes to “
”.
Plasmacluster™ and Plasmacluster ion™ are
trademarks of Sharp Corporation.
SAA2962SAA3015
4-42Monitor, climate, audio, phone and voice recognition systems
—
—
01/12/10—pattie


OPERATING TIPS
When the engine coolant temperature and out-
side air temperature are low, the air flow from
the foot outlets may not operate. This is not a
malfunction. After the coolant temperature
warms up, air will flow normally from the foot
outlets.The sensors
AandBon the instrument panel
helps maintain a constant temperature. Do not
put anything on or around this sensor.
Linking Intelligent Key:
The climate control system settings can be
memorized for each Intelligent Key. For more
details, see SETTING MEMORY FUNCTION in the
3. Pre-driving checks and adjustments section.
IN-CABIN MICROFILTER
Without Forest Air™ system
The climate control system is equipped with an
in-cabin microfilter which collects pollen, dirt
and dust, etc. To make sure that the air condi-
tioner heats, defogs, and ventilates efficiently,
replace the filter in accordance with the main-
tenance schedule in the INFINITI Service and
Maintenance Guide. To replace the filter, con-
tact an INFINITI retailer.
The filter should be replaced if the air flow de-
creases significantly or if windows fog up easily
when operating the heater or air conditioner.
With Forest Air™ system
The climate control system is equipped with a
natural grape seed polyphenol filter which col-
lects and neutralizes dirt, pollen, dust, etc. To
make sure that the air conditioner heats, defogs
and ventilates efficiently, replace the filter in
SIC2768
SAA3438
Monitor, climate, audio, phone and voice recognition systems4-43
—
—
07/15/10—tbrooks


ON·OFF/Volume control :
Push the ignition switch to the ACC or ON
position, and then push the ON·OFF button
while the system is off to turn on the last audio
source (i.e. FM or CD), which was playing im-
mediately before the system was turned off.
While the system is on, pushing the ON·OFF
button turns the system off.
Turn the VOL control knob to adjust the volume.
Adjusting tone quality and speaker balance :
To adjust Bass, Treble, Balance and Fade, push
the Audio control knob. When the display
shows the setting you want to change (Bass,
Treble, Balance and Fade), rotate the Audio
control knob to set the desired setting. For the
other setting methods, see “HOW TO USE SET-
TING BUTTON” earlier in this section.
This vehicle has some sound effect functions as
follows:
●Speed Sensitive Vol.
● Precision Phased Audio (if so equipped)
● BOSE Centerpoint 2 (if so equipped)
● BOSE AudioPilot
TM2 (if so equipped)
For more details, see “VEHICLE INFORMATION
AND SETTINGS” earlier in this section. Switching the display :
Pushing the DISC·AUX button will switch the
displays as follows:
●
Models with navigation system
iPod/USB →CD/DVD →Music Box →
Bluetooth Audio→iPod/USB
● Models without navigation system
iPod/USB →CD →iPod/USB
Linking Intelligent Key (models with navigation
system) :
The audio settings can be memorized for each
Intelligent Key. For more details, see “SETTING
MEMORY FUNCTION” in the “3. Pre-driving
checks and adjustments” section.
FM-AM-SAT radio operation
When the radio band select button is pushed
while the ignition switch is in the ACC or ON
position, the radio will come on at the channel
last played.
The last channel played will also come on when
the ON·OFF button is pushed to ON.
If another audio source is playing when the
radio band select button is turned to ON, the
audio source will automatically be turned off
and the last radio channel played will come on. When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.
radio (FM·AM) band select :
Pushing the XM radio band select button will
change the band as follows:
AM →FM1 →FM2 →AM
radio (XM) band select :
Pushing the XM radio band select button will
change the band as follows:
XM1 →XM2 →XM3 →XM1
The satellite radio is not available in Alaska,
Hawaii and Guam.
TUNE (Tuning) :
● For AM and FM radio
Turn the radio TUNE knob for manual tuning.
● For XM Satellite Radio
Turn the radio TUNE knob to seek channels
from all of the categories when any category
is not selected.
Monitor, climate, audio, phone and voice recognition systems4-59
—
—
07/15/10—tbrooks