2011 HONDA ODYSSEY check engine

[x] Cancel search: check engine

Page 563 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual If this message is on, the ignition
switchhastobeheldintheSTART
(III) position manually until the
engine starts. The ignition switch
canbeheldinthatpositionupto15
seconds.
Even though you may be able

Page 568 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual This allows you to move the shif t
lever out of Park if the normal
method of pushing on the brake
pedal and pressing the release
button does not work.Remove the key from the ignition
switch. Set the p

Page 570 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual The hydraulic system that operates
the brakes has two separate circuits.
Each circuit works diagonally across
the vehicle (the lef t-f ront brake is
connected with the right-rear brake,
etc.). If one

Page 575 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual When the low tire pressure indicator
is on, one or more of your tires is
signif icantly underinf lated. You
should stop and check your tires as
soon as possible, and inf late them to
the proper pressu

Page 577 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual If you have a f lat tire, the low tire
pressure indicator will come on.
Replace the flat tire with the
compact spare tire (see page ).
Each wheel (except the compact
sparetirewheel)isequippedwitha
tir

Page 591 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual Your vehicle has been designed
primarily to carry passengers and
their cargo. You can also use it to
tow a trailer if you caref ully observe
the load limits, use the proper
equipment, and f ollow the

Page 600 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual This section explains why it is
important to keep your vehicle well
maintained and how to f ollow basic
maintenance saf ety precautions.
If you have the skills and tools to
perf orm more complex maint

Page 613 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual ÛÝ
Select ‘‘RESET’’ by pressing the
INFO ( / ) button, then press
the SEL/RESET button to reset
the engine oil lif e display. The
maintenance item code(s) will
disappear, and the engine oi