2011 HONDA ODYSSEY parking brake

[x] Cancel search: parking brake

Page 159 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual All doors and the tailgate can be
locked f rom the outside by using the
key in the driver’s door lock. To
unlock only the driver’s door, insert
the key, turn the key, and release it.
The remaining

Page 168 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual µ
µ
CONT INUED
WHEN UNLOCKED In this mode,
you must unlock the tailgate bef ore
opening it. In addition, the tailgate
will not automatically relock when
you close it.
You can switch between these

Page 170 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual To open, pull the inside or outside
door handle, and slide the door back.
It will latch in the f ully open position.
When opening f rom the inside, the
childproof door lock must be
unlocked.
To close,

Page 171 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual To open or close the door with the
outside door handle, pull the door
handle. If you pull the door handle
while a door is opening or closing,
the door stops moving. If you pull the
door handle again,

Page 174 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual µµ
CONT INUED
You can customize the power sliding
doors button on the remote
transmitter to not open the sliding
doors without unlocking the sliding
doors lock f irst.
When you customize the setti

Page 202 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual The outside mirrors are heated to
remove fog and frost. With the
ignition switch in the ON (II)
position, turn on the heaters by
pressing the button. The indicator in
the button comes on as a reminder

Page 203 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual You will also see a ‘‘RELEASE
PARKING BRAKE’’ message on the
multi-inf ormation display (see page).
90On Touring modelsParking Brake200Driving the vehicle with the parking
brake applied can da

Page 547 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual Holding the grip, pull the support
rod out of its clip. Insert the end
into the designated hole in the
hood.
To close the hood, lif t it up slightly to
remove the support rod f rom the
hole. Put the s