2011 HONDA ODYSSEY light

[x] Cancel search: light

Page 570 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual The hydraulic system that operates
the brakes has two separate circuits.
Each circuit works diagonally across
the vehicle (the lef t-f ront brake is
connected with the right-rear brake,
etc.). If one

Page 595 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual ´
´
Honda recommends that any trailer
having a total weight of 1,000 lbs
(450 kg) or more be equipped with
its own electric or surge-type brakes.
There are two common types of
trailer brakes: surg

Page 596 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual When towing a trailer, we
recommend that you carry a f ull-size
spare wheel and tire for your vehicle
and trailer. If you use the compact
sparetirethatcamewithyour
vehicle, it could adversely af f ect

Page 597 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual When preparing to tow, and bef ore
driving away, be sure to check the
f ollowing:All items in or on the trailer are
properly secured and cannot shif t
while you drive.
Your vehicle tires and spare are

Page 600 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual This section explains why it is
important to keep your vehicle well
maintained and how to f ollow basic
maintenance saf ety precautions.
If you have the skills and tools to
perf orm more complex maint

Page 614 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual µ
µ
µ
µ
µ
µ
Ì
U.S. Vehicles:
Youshouldcheckthefollowing
items at the specif ied intervals. If
you are unsure of how to perf orm
any check, turn to the appropriate
page listed. Lights Che

Page 628 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual CONT INUED
Theheadlightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustmentsshouldbedonebyyour

Page 629 of 722

HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual Open the hood.
To change a bulb on the driver’s
side, remove the upper part of the
air intake duct.
Use a f lat-tip screwdriver to
remove the holding clip, then
remove the upper part.To change a bul