2011 HONDA CR-Z Battery

227
Driving
Parking Your Vehicle Auto Idle Stop (Manual Transmission)
Auto Idle Stop (Manual Transmission) To help maximize fuel economy, the engine automatically stops when the vehicle comes to a stop, depending on environmental and vehicle operating conditions. The AUTO STOP indicator blinks at this time. The engine then restarts once the vehicle is about to move again when you depress the clutch pedal fully, and the indicator goes off.If the driver’s door is opened while the indicator is blinking, a buzzer sounds to notify you that the auto idle stop function is in operation.
Auto Idle Stop (Manual Transmission)
If the Auto Idle Stop operating time lasts long enough to lower the 12 volt battery charge or the IMA battery charge, the engine may not restart automatically.Manually turn off the engine when you leave your vehicle. The duration of auto idle stop operation: Increases

• in the ECON mode compared to
normal or sport mode with climate control in use.Decreases

• if you operate the wipers and climate
control simultaneously.
Main MenuTable of Contents

228
Driving
Parking Your Vehicle Auto Idle Stop (Manual Transmission)
Auto Idle Stop Activates When:
■
Stopping with the brake, the clutch pedal is fully depressed, and the shift lever is in
N.
To restart the engine automatically, depress the clutch pedal.
Auto Idle Stop Does Not Activate When:
■
The low temperature indicator is on.

•
The IMA battery charge is low.

•
The bars of the ASST/CHRG indicators do not move when accelerating or

•
decelerating. The vehicle comes to a stop again before the vehicle speed reaches 9 mph

•
(15km/h) after the engine starts.The shift lever is in

•
R.
Airflow from the climate control system increases.

•
If you have selected the fan speed manually:
The display shows more than five vertical bars.

• is on (the indicator is on).
Auto Idle Stop May Not Activate When:
■
The climate control system is in use, and there is a significant difference between

•
the set temperature and the actual interior temperature. (Except when in ECON mode).When humidity in the interior is high.

•
The vehicle is stopped by braking suddenly

•
Auto Idle Stop Activates When:
The brake pedal is depressed, the vehicle slows down to a speed below 19 mph (30 km/h), and the clutch pedal is fully pressed. The engine may not stop or restart automatically if you fail to fully depress the clutch pedal.
Keeping the proper driving positions makes it easie r
for you to depress the clutch pedal fully.
Adjusting the Seats P.11 9
Main MenuTable of Contents

229
Driving
Parking Your Vehicle Auto Idle Stop (Manual Transmission)
The Engine Automatically Restarts When:
■
The clutch pedal is fully depressed, and the shift lever is moved to a position other than
N.
The Engine Automatically Restarts When the Clutch Pedal is Fully
■
Depressed Even If the Shift Lever is in
N When:
The low temperature indicator comes on.

•
The accelerator pedal is pressed.

•
The IMA battery charge becomes low.

•
The climate control system is in use, and the difference between the set

•
temperature and actual interior temperature becomes significant. The climate control system is being used to dehumidify the interior.

• The engine automatically restarts when the pressure on the brake pedal is repeatedly applied and released slightly during a stop. This applies even if the clutch pedal is not fully depressed.
When the Auto Idle Stop Indicator Starts Blinking Rapidly

■
Fully depress the clutch pedal.
The engine automatically restarts
When the Auto Idle Stop Indicator Starts Blinking
Rapidly
The indicator starts blinking rapidly under the following conditions: The

•
(windshield defogger) button is pressed.
When the climate control system is in use and

•
moisture builds up inside the vehicle. When the climate control system is in use and

•
the difference between the set temperature and the actual temperature inside the vehicle becomes signiicant.
Main MenuTable of Contents

Maintenance
This chapter discusses basic maintenance.
237
Before Performing Maintenance
Inspection and Maintenance ................... 238
Safety When Performing Maintenance ... 239Parts and Fluids Used in Maintenance
Service .................................................. 240
Maintenance Minder ™
............................ 241
Maintenance Under the Hood Maintenance Items Under the Hood ....... 245
Opening the Hood ................................. 246
Recommended Engine Oil ...................... 247
Oil Check ............................................... 248
Adding Engine Oil .................................. 249
Changing the Engine Oil and Oil Filter .... 250 Engine Coolant ...................................... 252
Transmission Fluid .................................. 254
Brake/Clutch Fluid .................................. 256
Refilling Window Washer Fluid ............... 257
Replacing Light Bulbs ............................. 258
Checking and Maintaining Wiper Blades Checking Wiper Blades ........................... 266
Changing the Front Wiper Blade Rubber 266
Changing the Rear Wiper Blade Rubber .. 268
Checking and Maintaining Tires Checking Tires ........................................ 269
Tire and Loading Information Label ........ 270
Tire Labeling ........................................... 270 DOT Tire Quality Grading (U.S. Vehicles)
.272
Wear Indicators ...................................... 274
Tire Service Life ...................................... 274
Tire and Wheel Replacement .................. 275
Tire Rotation .......................................... 276
Winter Tires ............................................ 277
12 Volt Battery ........................................ 278
Remote Transmitter Care ....................... 279
Replacing the Battery ............................. 279
Climate Control System Maintenance ... 280
Cleaning ................................................... 281
Interior Care ........................................... 281
Exterior Care .......................................... 283
Main Menu

239
Maintenance
Before Performing Maintenance Safety When Performing Maintenance
Safety When Performing Maintenance
Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.Maintenance Safety

■
To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames
•
away from the battery and all fuel related parts. To clean parts, use a commercially available degreaser or parts cleaner, not
•
gasoline.Wear eye protection and protective clothing when working with the 12 volt
•
battery or compressed air.Engine exhaust gasses contain carbon monoxide, which is poisonous and can kill
•
you.
Only operate the engine if there is sufficient ventilation.
Vehicle Safety

■
The vehicle must be in a stationary condition.
•
Make sure your vehicle is parked on level ground, the parking brake is set,
and the engine is off.
Be aware that hot parts can burn you.
•
Make sure to let the engine and exhaust system cool thoroughly before
touching vehicle parts.
Be aware that moving parts can injure you.
•
Do not start the engine unless instructed, and keep your hands and limbs
away from moving parts.
Do not touch the IMA battery and wirings (orange).
•
Safety When Performing Maintenance

WARNING
Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed. Always follow the inspection and maintenance recommendations according to the schedules in this owner’s manual.
WARNING
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed. Always follow the procedures and precautions in this owner’s manual.
Main MenuTable of Contents

278
Maintenance
12 Volt Battery
Checking the 12 Volt Battery
Check the battery condition monthly. Look at the test indicator window and check the terminals for corrosion.
If your vehicle’s battery is disconnected or goes dead: The audio system is disabled.
•
Entering the Security Code P.140
The clock resets.
•
Setting the Clock P.98
The navigation system is disabled. A PIN code will be required.
•
Refer to the navigation system manual.
Charging the 12 Volt Battery Disconnect both battery cables to prevent damaging your vehicle’s electrical system. Always disconnect the negative (–) cable first, and reconnect it last.
Test Indicator Window 12 Volt Battery
WARNING: Battery posts, terminals, and
related accessories contain lead and lead compounds.Wash your hands after handling. The test indicator's color information is on the battery. When you ind corrosion, clean the battery terminals by applying a baking powder and water solution. Rinse the terminals with water. Cloth/towel dry the battery. Coat the terminals with grease to help prevent future corrosion. If the 12 volt battery is disconnected or goes dead, the IMA battery level gauge reading may show less than the actual level the next time you turn the ignition switch to ON
. It will show the correct
level after you drive for about 30 minutes.
WARNING
The battery gives off explosive hydrogen gas during normal operation. A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you. Wear protective clothing and a face shield, or have a skilled technician do any battery maintenance.
Main MenuTable of Contents

279
Maintenance
Remote Transmitter Care
Replacing the Battery If the indicator does not come on when the button is pushed, replace the battery.
Battery type: CR1616
1. Unscrew the cover with a small Phillips- head screwdriver. Push a button to pry open the transmitter.
2. Open the keypad.
Wrap the small flat-tip screwdriver
with a cloth to prevent scratching the transmitter.
Make sure to replace the battery with the
3.
correct polarity.
Replacing the Battery
NOTICE An improperly disposed of battery can hurt the environment. Always conirm local regulations for battery disposal.
Replacement batteries are commercially available or at a dealer.
Screw
BatteryKeypad
Main MenuTable of Contents

284
Maintenance
Cleaning Exterior Care
Applying Wax
■
A good coat of automotive body wax helps protect your vehicle’s paint from the elements. Wax will wear off over time and expose your vehicle’s paint to the elements, so reapply as necessary.
Maintaining the Bumpers and Other Resin Coated Parts

■
If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they may be stained or the coating may peel. Promptly wipe it away using a soft cloth.
Cleaning the Window

■
Wipe using a glass cleaner.
Maintaining Aluminum Wheels

■
Aluminum is susceptible to deterioration caused by salt and dirt. Use a sponge and mild detergent to wipe away road dirt or salt water promptly.Be careful not to use harsh chemicals (including some commercial wheel cleaners) or a stiff brush. They can damage the clear coat of the aluminum alloy wheels that keeps the aluminum from corroding and tarnishing.
Applying Wax
NOTICE Chemical solvents and strong cleaners can damage the paint, metal, and plastic on your vehicle. Wipe up spills immediately.
Maintaining the Bumpers and Other Resin Coated
Parts
Ask a dealer about the correct coating material when you want to repair the painted surface of the parts made of resin.
Cleaning the Window
Wires are mounted to the inside of the rear window. Wipe along the same direction as the wires with a soft cloth so as not to damage them.
Main MenuTable of Contents