2011 HONDA CR-V lock

[x] Cancel search: lock

Page 328 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual If the ABS indicator and the brake 
system indicator come on together,
and the parking brake is f ully
released, the EBD system may also
be shut down.It only helps with the
steering control during bra

Page 339 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Your vehicle can be towed behind a 
motorhome at legal highway speeds
up to 65 mph (100 km/h). Do not
exceed 65 mph (100 km/h).
Otherwise, severe transmission
damage will occur. To avoid damage
to the

Page 340 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual If you tow more than 8 hours in one 
day, you should repeat the above
procedure at least every 8 hours
(when you stop f or f uel, etc.)Only remove the fuse after you have
perf ormed the transmission s

Page 342 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Before you leave the pavement, be 
sure to do all scheduled maintenance
and service, and inspect your vehicle
f or any problems. Pay special
attention to the condition of the tires,
and check the tire

Page 358 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Do not add any rust inhibitors or 
other additives to your vehicle’s
cooling system. They may not be
compatible with the coolant or
engine components.Pour coolant into the reserve tank.
Fill it half

Page 363 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Check the level on the side of the 
reservoir when the engine is cold.
The f luid should be between the
UPPER LEVEL and LOWER LEVEL.
If not, add power steering f luid to the
UPPER LEVEL. 
Pour the f l

Page 366 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Pull the bulb straight out of its 
socket. Push the new bulb straight
into the socket until it bottoms.Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place. 
Turn

Page 367 of 445

HONDA CR-V 2011 RD1-RD5, RE7 / 3.G Owners Manual Remove the socket from the 
headlight assembly by turning it
one-quarter turn counterclockwise. 
Pull the bulb straight out of its 
socket. Push the new bulb straight
into the socket until it bottoms.