2011 FORD EXPLORER buttons

3.Entertainment:Press this area to access music and media
features such as radio, CD, USB port, etc. These screens will appear with
a red tone. Refer to theMedia featureschapter in this supplement.
4.
Phone:Press this area to access SYNChands-free phone
features. These screens will appear with a yellow tone. Refer to the
Phone featureschapter in this supplement.
The corners will also display any active modes within those menus, such
as your phone being connected or the climate temperature.
Quick access buttons
In addition to accessing the corners, you can also press MENU,
orfor quick access to additional settings and features.
Press MENU to access:
•Clock•Display
•Sound•Vehicle
•Settings•Help
Press
to access:
•SYNC Services•SIRIUS Travel Link
•Notifications•Calendar
•SYNC Apps
Note:If the
icon appears with a yellow tone, refer toNotifications
in theSettingschapter.
Note:Some features are not available while the vehicle is moving.
Screen differences:Depending on your vehicle’s option package and
software, your screens may vary in appearance from the screens shown
in this supplement. Your features may also be limited depending on your
market. Please check with your authorized dealer for availability.
Customizing your home screen
Press
to access the home screen.
Introduction
4SeeEnd User License Agreementat the end of this book
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)

Use the OK and arrow buttons on
the right side or your steering wheel
to scroll through your available
modes:
•
Entertainment
•
Phone
•
Navigation (if equipped)
•
Climate
Note:If your vehicle is not equipped with navigation,Compasswill
appear in the display instead ofNavigation. If you press
to go into
theCompassmenu, you can see the compass graphic.
•Press
/to scroll through
the modes.
•Press
to enter the mode.
•Press
/to make
adjustments within the chosen
mode.
•Press OK to confirm your
selection.
For example, in phone mode, you
can accept or reject an incoming
call.
Introduction
8SeeEnd User License Agreementat the end of this book
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)

In Entertainment mode, you can
view what is playing and make some
adjustments.
You can also access and make adjustments in Navigation mode (if
equipped) and Climate mode.
Help!
Your touchscreen system has a help feature which you can access at any
time.
To access:
1. Press Menu > Help.
2. From this screen you can access:
•Where am I?:Select to view the vehicle’s current location. If your
vehicle is equipped with navigation, you will see your location on a
map. If your vehicle is not equipped with navigation, or if your SD
card is not inserted, you will receive your vehicle’s latitude and
longitude.
•911 Assist:Select to access the 911 Assist™ settings, vehicle restart
instructions and emergency quick dial contacts.
In Case of Emergency (ICE) Quick Dial:This feature allows you
to save up to two numbers as ICE contacts for quick access in the
event of an emergency. SelectEditto access your phonebook and
then select the desired contacts. The numbers will then appear as
options on this screen for the ICE 1 and ICE 2 buttons. The ICE
contacts you pre-select will also be presented to you at the completion
of the 911 Assist call process for quick access.
•Voice command list:Select to view possible voice commands.
From this screen, you can also access: System information, Software
Licenses and Driving Restrictions.
Introduction
9SeeEnd User License Agreementat the end of this book
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)

Using voice commands with the touchscreen options
Your voice system has a special dual mode feature which allows you to
switch between using voice commands and the touchscreen. The most
common place this is available is with your navigation feature (if
equipped). During a navigation voice session, you will notice that some
of the buttons on the screen are outlined in blue and some are not.
The buttons on the screen that are outlined in blue are both voice
commands and can be selected during a voice session. The buttons that
are not outlined in blue can’t be used as voice commands and if they are
touched during a voice session will cancel the voice session. Some
examples are as follows:
•If you press
and say, “Navigation”, after the system confirms the
command and prompts you again, say, “Destination”. The system will
change to the destination screen.
•If you say, “Intersection”, then the system will change the screen to
the intersection screen where “Street”, “City” and “State” are outlined
in blue. You are able to switch between fields by touching the buttons
or by saying, “Enter first street” or “Change city”.
•If you say, “Street Address” the screen will change to the street
address screen and then “Enter City”, where State, City, Street and
Number are outlined in blue indicating that you are able to switch
between the fields by touching the buttons or by saying commands
like “Enter Street”, “Change City”, or “Enter House Number”.
•If you are in the process of entering a destination by voice and your
vehicle comes to a stop, (for example, stopping at a red light), the key
board will appear on the screen. If you make more than three
consecutive button presses, (for example, spelling a city), then the
voice session will be cancelled.
Voice recognition system overview
15SeeEnd User License Agreementat the end of this book
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)

•Destination symbol:This icon
indicates the location of the final
destination on the map.
•Next maneuver point:This icon
shows the location where the
next turn should occur on the
planned route.
•No GPS symbol:This icon
indicates that insufficient GPS
satellite signals are being received
for accurate map positioning. The
symbol may be intermittently displayed under normal operation in an
area with poor GPS access.
Quick touch buttons
When in map mode, touch anywhere on the map display to access the
following options:
•Set as Dest:Press to select a scrolled location on the map as your
destination. (You may scroll the map by pressing your index finger on
the map display. When you reach the desired location, simply let go
and then press ‘Set as Dest’.
•Set as Waypoint:Press to set the current location as a waypoint.
•Save to FavoritesPress to save the current location to your
favorites.
•POI Icons On/Off:Press to select POI icons to be displayed on the
map. Up to three icons can be selected for display on the map at the
same time.
•Traffic List (if SIRIUSTravel Link™ is active):Press to display
nearby traffic incidents when a route is not active. The incidents can
be sorted by distance, incident, or A-Z. When a route is active, the
system will automatically display traffic incidents on route. If there are
not incidents on the current route, the system will indicate that and
switch to the Other Traffic Places screen which will allow selection of
Traffic near My Home, Traffic Near Favorite Destination, or My Traffic
Places. These selections refer to locations previously entered into the
system.
Navigation features
64SeeEnd User License Agreementat the end of this book
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)

911 Assist™ ................................44
A
Accessing and using your USB
port ..............................................30
Ambient mood/lighting ...............55
AM/FM .........................................16
A/V inputs ....................................35
C
Cleaning the touchscreen ..........10
Customizing your home screen ...4
D
Display settings ...........................54
E
End user license agreement ......69
H
HD Radio™ .................................18
Help ................................................9
I
Infotainment display .....................7
K
Keyless entry system
programming entry code .........55
M
Map icons ....................................63
Map mode ....................................61N
Navigation features .....................56
Notifications ................................54
P
Pairing other phones ..................40
Pairing your phone for the first
time ..............................................37
Phone dependent features .........37
Privacy information ....................11
Q
Quick touch buttons ...................64
R
Rear view camera display ..........55
S
Safety information ......................10
Satellite Radio .............................25
SD card ..................................28, 56
Setting a destination ..................56
Setting the clock ...........................6
SIRIUSsatellite radio ...............22
SIRIUS Travel Link .....................66
Supported media file types ........33
SYNCServices ...........................48
System settings ...........................54
T
Text messaging ...........................40
Index
86
2011 HMI-2 Gen 2(ln1)
Supplement, 1st Printing
USA(fus)