2011 FORD CROWN VICTORIA Owners Manual

Page 33 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual 2.CD eject:Press to eject a CD. If
the disc is not removed within the
allotted time, the system will
automatically reload the CD and begin play.Note:The eject function will
work when the ignition is t

Page 34 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual 7.MENU:Press MENU repeatedly
to access RDS ON/OFF. Press
SEL-TEXTto switch RDS
ON or OFF. Press MENU again to access Program type mode or Show
Type/Name mode. (MENU must be pressed within 10 seconds t

Page 35 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual than six strong stations, the system will store the last one in the
remaining presets. When activated, AUTOSET will momentarily appear in
the display when any of the preset controls are pressed.
Speed

Page 36 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual 11.SEEK:Press to access the
next/previous radio station, tape
selection or CD track.
12.REW (Rewind):Press to
rewind in tape or CD mode.
FF (Fast forward):Press to fast
forward in tape or CD mode.
13.

Page 37 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual 20.On/Off/Volume:Press to turn
on/off; turn to adjust the volume
levels.Note:With the ignition
turned off, you may press the
volume control to momentarily view
the clock.
AM/FM Premium sound satellite

Page 38 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual 1.CD slot:To insert a CD, press
LOAD. Wait to insert a CD until the
system displays LOAD CD #. When
the system is ready, insert a CD, label side up.
2.SEEK:Press to access the
next/previous radio stat

Page 39 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual 7.BAL (Balance):Press BAL; then
press
SEL-TEXTto shift
sound to the left/right speakers.
FADE:Press FADE; then press
SEL-TEXTto shift sound
to the rear/front speakers.
8.SEL-TEXT:Use with Bass,
Treble

Page 40 of 333

FORD CROWN VICTORIA 2011 2.G Owners Manual Compression:Brings soft and loud CD passages together for a more
consistent listening level when in CD mode. Press MENU until
compression status is displayed. Press
SEL-TEXTto enable the
compression f