Page 16 of 396
Instruments and controls
1.
Cruise control/speed limiter controls.
2.
Controls for optional functions.
3.
Steering wheel adjustment control.
4.
Lighting and direction indicator control
stalk.
5.
Instrument panel.
6.
Driver's airbag.
Horn.
7.
Controls for audio and telematic system.
8.
Controls for Bluetooth system or telephone.
9.
Bonnet release.
10.
Door mirror controls.
Electric window controls.
11.
Fusebox.
12 .
Manual headlamp height adjustment
Lower side switch panel.
13.
Fuel filler flap opening switch.
Upper side switch panel.
14 .
Side adjustable air vent.
15.
Front side window demisting vent.
Page 19 of 396
17Familiarisation
Sitting comfortably
Manual adjustment
88
Driver's seat
Forwards-backwards
Height
Electric adjustment
Seat back angle
89
Page 20 of 396
Sitting comfortably
Head restraint height and angle
Front seats
Other functions available...
Lumbar massage.
Storing driving positions
(dr iver 's elec tr ic seat).
Heated seats.
90
1.
Release the steering wheel.
2.
Adjust for height and reach.
3.
Lock the steering wheel.
Steering wheel adjustment
94
As a safety precaution, these
operations must only be carried out
when stationary.
Lumbar
91
Page 21 of 396
19Familiarisation
For your comfor t, the front armrest can be
adjusted for longitudinal position and for height,
depending on version.
Front armrest
147, 14 8
It also has a storage compar tment; this may be
equipped with a 230 V/50 Hz power socket.
Sitting comfortably
Page 22 of 396
Sitting comfortably
Door mirrors
Adjustment
A.
Selection of the mirror to be adjusted.
B.
Adjustment of the position of the mirror in
the four directions.
C.
De-selection of the mirror.
95
Other functions available...
Folding/Unfolding.
Automatic tilting of the mirror in reverse
gear for parking.
Blind spot sensors.
Rear view mirror
Manual day/night model
1.
Selection of the "day" position of the mirror.
2.
Adjustment of the mirror.
Automatic day/night model
97
A.
Brightness detection in automatic day/night
mode.
B.
Adjustment of the mirror.
1.
Fastening the buckle.
2.
Height adjustment.
Front seat belts
179
Page 90 of 396
Front seats
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfort.
Manual adjustments
Forwards-backwards adjustment
)
Raise the control and slide the seat
for wards or backwards.
Driver's or passenger's seat
height adjustment
)
Pull the control upwards to raise or push
it downwards to lower, as many times as
necessary, to obtain the position required.
Seat back angle adjustment
)
Turn the control knob to adjust the seat
backrest angle.
As a safety measure, seat adjustments
should only be done when stationary.
Page 91 of 396
89Comfort
Front seats
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfort.
Driver's seat electric adjustments
Forwards-backwards adjustment
)
Push the control for wards or rear wards to
slide the seat.
Seat cushion height and angle
adjustment
)
Tilt the rear part of the control upwards or
downwards to obtain the required height.
)
Tilt the front part of the control upwards or
downwards to obtain the required angle.
Seat back angle adjustment
)
Tilt the control for wards or rear wards to
adjust the angle of the seat back.
The electrical functions of the driver's
seat are deactivated approximately one
minute after the ignition is switched off.
To reactivate them, switch on the ignition.
Page 92 of 396
Heated seats control
With the engine running, the front seats can be
heated separately.
)
Use the adjustment dial, placed on the side
of each front seat, to switch on and select
the level of heating required:
0:
Off.
1
:
Low.
2
:
Medium.
3
:
High.
Additional adjustments
Head restraint height and angle
adjustment
)
To raise a head restraint, pull it upwards.
)
To remove the head restraint, press the
lug A
and pull the head restraint upwards.
)
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back.
)
To lower the head restraint, press the lug A
and the head restraint at the same time.
)
To adjust the angle of the head restraint, tilt
its lower part for wards or rear wards. The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
