2011 Citroen DS3 engine

CHECKS PRACTICAL
INFORMATIONTECHNICAL
DATAAUDIO AND
TELEMATICS
179 Bonnet
180 Running out of fuel (Diesel)
181 Petrol engines
182 Diesel engines
183 Checking levels
186 Checks190 Temporary puncture
repair kit
196 Changing a wheel
203 Changing a bulb
210 Changing a fuse
217 Battery
219 Energy economy mode
220 Changing a wiper blade
221 Towing the vehicle
223 Towing a trailer
225 Accessories230 Petrol engines
232 Petrol weights
234 LPG engines
235 LPG weights
236 Diesel engines
237 Diesel weights
238 Dimensions
240 Identifi cation markings245 Emergency or assistance
247 MyWay
281 Audio system
012012013013010010011011

Exterior


Customising kits

These expressive stickers form par t of a range
of kits, very different one from another, which
allow you to create a unique and attractive
exterior for your vehicle.

Guide-me-home lighting

After switching off the ignition, under low
lighting conditions the headlamps remain on for
a few seconds to help you leave the vehicle.

Rear parking sensors

This system provides a warning when reversing
by detecting obstacles located behind the
vehicle.



19





109




173




Temporary puncture repair kit

This kit is a complete system consisting of a
compressor and a sealant cartridge, to allow
the temporary repair of a tyre.



190





Stop & Start

This system puts the engine
temporarily on standby during
stops in the traffic (red lights, traffic
jams, etc...). The engine restarts
automatically as soon as you want to
move off. The Stop & Star t system
reduces fuel consumption and exhaust
emissions, and offers the comfor t of
complete silence when stationary.



166

Monitoring

On switching on, the dial needles go to the
extent of their travel then return to 0.


A.
With the ignition on, the fuel gauge bars for
the fuel remaining should light up.

B.
With the engine running, the associated
low level warning lamp should go off.

C.
With the ignition on, the oil level indicator
should display "OIL OK"
for a few
seconds.
If the levels are not correct, top up the level
which is low.

Instrument panels




26, 28



1.
With the ignition on, the orange and red
warning lamps come on.

2.
With the engine running, these warning
lamps should go off.
If a warning lamp remains on, refer to the page
concerned.

Warning lamps



30, 35

Illumination of the indicator lamp indicates the
state of the corresponding function.


A.
Deactivation of the ESP/ASR system.


Switch panel

14 4


B.
Deactivation of Stop & Start.
167

Driving safely


Stop & Start


Going into engine STOP mode




166

The "ECO"
warning lamp comes on
in the instrument panel and the engine
automatically goes into standby:


- with a manual gearbox:
at speeds below
12 mph (20 km/h), when you put the gear
lever in neutral, and you release the clutch
pedal.


Going into engine START mode

Deactivation/Reactivation

You can deactivate the system at any time by
pressing the "ECO OFF"
button; the button's
warning lamp comes on.



167





167


The system is automatically reactivated
every time the engine is star ted with
the key.
Before refuelling or doing anything
under the bonnet, you must switch off
the ignition with the key. The "ECO"
warning lamp goes off
and the engine restarts automatically:


- with a manual gearbox:
when you fully

depress the clutch pedal.
In certain circumstances, the STOP mode
may not be available; the "ECO"
warning lamp
flashes for a few seconds, then goes off. In certain circumstances, START mode may be
invoked automatically; the "ECO"
warning lamp
flashes for a few seconds, then goes off.

21Familiarisation
Driving safely



1.
Selecting/Switching off speed limiter mode.

2.
Decrease the programmed value.

3.
Increase the programmed value.

4.
Speed limiter on/off.


Speed limiter "LIMIT"

169



1.
Selecting/Switching off cruise control mode.

2.
Decrease the programmed value.

3.
Increase the programmed value.

4.
Cruise control Off/Resume.


Cruise control "CRUISE"




171

The cruise control or speed limiter mode
appears in the instrument panel when it is
selected.

Display in the instrument panel


Cruise control

Speed limiter


The values must be set with the engine running.


In order to be programmed or activated, the
vehicle speed must be higher than 25 mph
(40 km/h), with at least four th gear engaged
on a manual gearbox (second gear on a
SensoDrive or automatic gearbox).

Eco-driving

Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.


Optimise the use of your
gearbox

With a manual gearbox, move off gently,
change up without waiting and drive by
changing up quite soon. If your vehicle has
the system, the gear shift indicator invites you
to change up; it is displayed in the instrument
panel, follow its instructions.

With an automatic or electronic gearbox, stay
in Drive "D"
or Auto "A"
, according to the
type of gear selector, without pressing the
accelerator pedal heavily or suddenly.



Drive smoothly


Maintain a safe distance between vehicles, use
engine braking rather than the brake pedal,
and press the accelerator progressively. These
attitudes contribute towards a reduction in fuel
consumption and CO
2 emissions and also helps
reduce the background traffic noise.

When the traffic is flowing well, and if you
have cruise control, make use of the system at
speeds above 25 mph (40 km/h).



Control the use of your
electrical equipment

Before moving off, if the passenger
compartment is too warm, ventilate it by
opening the windows and air vents before
using the air conditioning.
Above 30 mph (50 km/h), close the windows
and leave the air vents open.
Remember to make use of equipment
that can help keep the temperature in the
passenger compar tment down (sun roof and
window blinds...).
Switch off the air conditioning, unless it has
automatic digital regulation, as soon as the
desired temperature is attained.
Switch off the demisting and defrosting
controls, if not automatic.
Switch off the heated seat as soon as
possible.

23

Limit the causes of excess
consumption

Spread loads throughout the vehicle; place the
heaviest items in the bottom of the boot, as
close as possible to the rear seats.
Limit the loads carried in the vehicle and
reduce wind resistance (roof bars, roof rack,
bicycle carrier, trailer...). Use a roof box in
preference.
Remove roof bars and roof racks after use.

At the end of winter, remove snow tyres and
refit your summer tyres.



Observe the recommendations
on maintenance

Check the tyre pressures regularly, when
cold, referring to the label in the door
aperture, driver's side.
Carry out this check in par ticular:


- before a long journey,

- at each change of season,

- after a long period out of use.
Don't forget the spare wheel and the tyres on
any trailer or caravan.

Have your vehicle ser viced regularly (engine
oil, oil filter, air filter...) and obser ve the
schedule of operations recommended by the
manufacturer.



When refuelling, do not continue after the 3 rd
cut-off of the nozzle to avoid any over flow.

At the wheel of your new vehicle, it is only
after the first 1 800 miles (3 000 kilometres)
that you will see the fuel consumption settle
down to a consistent average.

Switch off the headlamps and front foglamps
when the level of light does not require their
use.

Avoid running the engine before moving off,
particularly in winter; your vehicle will warm
up much faster while driving.

As a passenger, if you avoid connecting
your multimedia devices (film, music, video
game...), you will contribute towards limiting
the consumption of electrical energy, and so
of fuel.
Disconnect your portable devices before
leaving the vehicle.

Petrol - Diesel instrument panels, manual, SensoDrive or
automatic gearbox
Provided with permanent back-lighting, the instrument panel groups together the vehicle's dials and indicator and warning lamps.


1.
Rev counter.

Indicates the speed of rotation of the
engine (x 1 000 rpm).

2.
Vehicle speed.

Indicates the current speed of the moving
vehicle (mph or km/h).

3.
Engine coolant temperature.

Indicates the temperature of the engine
coolant liquid.

Dials


7.
Lighting dimmer button.

Adjusts the level of the instrument and
controls illumination and the interior mood
lighting.
4.
Display screen.


5.
Fuel level.

Indicates the quantity of fuel remaining in
the tank.

6.
Display management button

Alternates display between range and trip
mileage recorder.
Servicing information.
Resets the selected function to zero (trip
distance recorder or ser vice indicator). For more information, refer to the
paragraph relating to the button or
function and its associated display.