Page 73 of 324

71Comfort
Digital air conditioning
The air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort"
programme
Press the "AU TO "
button. The
"AU TO "
symbol is displayed.
We recommend that you use
this mode. It provides optimised
automatic control of all of the following
functions: passenger compar tment
temperature, air flow, air distribution and air
intake, in accordance with the comfort value
that you have chosen.
This system is designed to operate effectively
in all seasons, with the windows closed. For your comfor t, when the engine is
switched off, the settings are retained
until the engine is switched on again.
To prevent too great a distribution of
cold air when the engine is cold, the air
flow will only reach its optimum level
gradually.
2. Temperature adjustment
The value indicated on the display corresponds
to a level of comfor t and not to a temperature in
degrees Celsius or Fahrenheit. On entering the vehicle, if the interior
is very cold or hot, there is no need to
change the value displayed in order
to reach the required level of comfor t.
The system corrects the temperature
difference automatically and as quickly
as possible.
Press the "
"
and "
"
buttons to
change this value. A setting around
the value 21
enables optimum
comfor t to be obtained. However,
depending on your requirements, a
setting between 18 and 24 is usual.
3. Automatic "visibility"
programme
The automatic comfor t programme
may not be sufficient for rapid
demisting or defrosting of the
windscreen and side windows
(humidity, several passengers, ice, etc.).
In this case, select the automatic visibility
programme. The button 3
indicator lamp
comes on.
The system automatically controls the air
conditioning and the flow of air and provides
optimum air distribution to the windscreen and
side windows. It deactivates air recirculation 5
.
To exit this programme, press button 3
again or
"AU TO "
, the indicator lamp on the button goes
off and "AU TO "
is displayed.
With Stop & Star t, when demisting has
been activated, the STOP mode is not
available.
Page 75 of 324

73Comfort
6. Air distribution adjustment
Pressing this button several times in
succession enables the air flow to be
directed in turn towards:
- the windscreen and the side windows
(demisting or defrosting),
- the windscreen, side windows and air
vents,
- the windscreen, the side windows, the air
vents and the footwells,
- the windscreen, the side windows and the
footwells,
- the footwells,
- the air vents and the footwells,
- the air vents.
Avoid driving for long periods with the
air conditioning switched off (risk of
misting and reduction of the air quality
in the cabin). Press the "full fan"
button to
increase the air flow.
7. Air fl ow adjustment
The air flow symbol, the fan, fills progressively
according to the value requested.
Press the "empty fan"
button to
decrease the air flow.
Switching the system off
Press the air flow "empty fan"
button 7
until the fan symbol
disappears.
This action switches off all of the functions of
the air conditioning system.
Thermal comfort is no longer controlled.
A slight flow of air resulting from the movement
of the vehicle, remains perceptible however.
Pressing the air flow "full fan"
button 7
or on
"AU TO "
reactivates the system with the values
set before it was switched off.
Page 88 of 324
004
Access
This section describes the functions of the remote control key, electric
windows, central locking of doors and boot and access to the fuel filler.
Page 96 of 324

1.
Driver's electric window switch.
2.
Passenger's electric window switch.
Window controls
System which opens or closes a window manually or automatically. It is fitted with anti-pinch protection on the driver's side.
The electric window switches
remain operational for approximately
45 seconds after the ignition is
switched off or until a door is opened.
If, during this period of 45 seconds, you
open a door while operating a window,
the window stops. The window switch
will then only be operative after the
ignition is switched on again.
)
Press or pull the switch. The
window stops as soon as the
switch is released.
Passenger's electric
window
There are two methods of operation:
Driver's electric window
- manual mode
)
Press or pull the switch without passing
the point of resistance. The window
stops as soon as the switch is released.
- automatic mode
)
Press or pull the switch fully. The window
opens or closes completely when the
switch is released.
)
Pressing or pulling the switch again
stops the movement of the window.
Page 97 of 324