Page 13 of 324
11Familiarisation
Instruments and controls
1.
Cruise control/speed limiter controls.
2.
Headlamp height adjustment.
3.
Steering wheel adjustment.
4.
Lighting and direction indicator stalk
5.
Instrument panel.
6.
Driver's airbag.
Horn.
7.
Gear lever.
8.
12 V accessory socket
USB port /auxiliary socket.
9.
Heated seat control.
10.
Bonnet release lever.
11.
Door mirror controls.
Electric window controls.
12 .
Fusebox.
13.
Stop & Star t button
Electronic stability programme button
(ESP/ASR).
14 .
Front door window demisting/defrosting vent.
15.
Speaker (tweeter).
16.
Windscreen demisting/defrosting vent.
Page 15 of 324
13Familiarisation
Sitting comfortably
3.
Seat back angle adjustment.
77, 80
Front seats
1.
Forwards-backwards adjustment.
2.
Height adjustment.
Page 16 of 324
Sitting comfortably
4.
Head restraint height adjustment.
Other adjustments
Other functions...
Access to rear seats.
Heated seats.
78, 81
1.
Release the adjustment mechanism.
2.
Adjust for height and reach.
3.
Lock the adjustment mechanism.
Steering wheel adjustment
83
For reasons of safety, these operations
must only be carried out with the
vehicle stationary.
Page 79 of 324
77Comfort
Front seats
Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfor t.
Manual adjustments
Forwards-backwards adjustment
)
Raise the control and slide the seat
for wards or backwards.
Driver’s or passenger’s seat
height adjustment
)
Pull the control upwards to raise or push
it downwards to lower, as many times as
necessary, to obtain the position required.
Seat back angle adjustment
)
Push the control rear wards.
Page 80 of 324
Additional adjustments
Head restraint height adjustment
)
To raise the head restraint, pull it upwards.
)
To remove the head restraint, press the
lug A
and pull the head restraint upwards.
)
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back.
)
To lower the head restraint, press the lug A
and the head restraint at the same time. The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Page 82 of 324
RACING front seats
Seat consisting of a seat cushion and a seat back which can be adjusted to adapt your position for maximum ease of driving and comfort.
Manual adjustments
Forwards-backwards adjustment
)
Lift the control and slide the seat for wards
or backwards.
Driver's or passenger's seat
height adjustment
)
Pull the handle upwards to raise or push
it downwards to lower, as many times as
necessary to obtain the required position.
Seat backrest angle adjustment
)
Push the handle towards the rear and move
the seat backrest for wards or backwards.
Page 85 of 324
83Comfort
These have one position for use (up) and a
stowed position (down).
They can also be removed.
To remove a head restraint:
)
release the backrest using control 1
,
)
tilt the backrest 2
slightly for wards,
)
pull the head restraint upwards to the stop,
)
then, press the lug A
.
Rear head restraints
Never drive with the head restraints
removed; they must be in place and
correctly adjusted.
Steering wheel adjustment
)
When stationary
, pull the control lever to
release the adjustment mechanism.
)
Adjust the height and reach to suit your
driving position.
)
Push the control lever to lock the
adjustment mechanism.
As a safety precaution, these
operations should only be carried out
while the vehicle is stationary.
Page 113 of 324
111Visibility
LED lamps
Daytime external lighting using specific front lamps providing a signature of the vehicle. Comprising
two sets of six light emitting diodes (LEDs), they are located in the ver tical scoops below each
headlamp.
On starting the vehicle, in daylight the LED
lamps come on automatically, if the lighting
stalk is in position "0"
or "AU TO "
.
If the sidelamps and headlamps are switched
on manually or automatically, the LED lamps
switch off. For countries where exterior lighting by day is
not a legal requirement, you can activate or
deactivate the function via the multifunction
screen configuration menu.
Headlamp
adjustment
To avoid causing a nuisance to other road
users, the height of the headlamps should be
adjusted in relation to the load in the vehicle.
0
.
Driver only or driver + front passenger.
-
.
Intermediate setting
1.
5 people.
-
. 5 people + load in the boot.
2.
Driver only + maximum authorised load in
the boot.
This position is sufficient to avoid causing dazzle.
Higher settings may limit the spread of light
from the headlamps.
The initial setting is position "0"
.
Programming
In countries where it is a legal
requirement:
- this function is activated by default
and cannot be deactivated,
- in daylight, the sidelamps and
number plate lamps also come on,
- If the sidelamps or headlamps
are switched on manually or
automatically, the LED lamps
switch off.
For versions not fitted with LED lamps,
it is the dipped beam headlamps that
come on automatically on star ting the
vehicle.
