Page 4 of 164
.
Contents
Instrument panel 18
Indicator and warning lamps 19
Main battery state of charge indicator 26
Energy consumption/generation indicator 27
Distance recorder 28
Tr i p d i s t a n c e r e c o r d e r 2 8
Lighting dimmer 29
Ser vice indicator 29
Range indicator 30
Monitoring Familiarisation
Remote control key 31
Electric windows 34
Doors 35
Boot 36
Charging fl aps 37
Access
Front seats 38
Rear seats 40
Mirrors 42
Interior fi ttings 44
Heating and Ventilation 47
Air conditioning 49
Rear screen demist - defrost 51
Comfort
Star ting - stopping the vehicle 52
Manual parking brake 53
Drive selector 54
Driving
Lighting controls 56
Automatic illumination of headlamps 58
Headlamp adjustment 58
Wiper controls 59
Courtesy lamp 60
Visibility
Page 10 of 164
Familiarisation
8
Instruments and controls
1.
Parking brake.
2.
Drive selector.
3.
12 V accessory socket.
4.
Passenger’s airbag deactivation.
USB por t.
5.
Glove box.
6.
Cup holder.
7.
Windscreen demisting vents.
8.
Lighting and direction indicator stalk.
9.
Audio system.
10.
Hazard warning lamps switch.
11.
Centre vents.
12 .
Heating/air conditioning controls.
13.
Emergency or assistance call.
Page 16 of 164
Familiarisation
14
Monitoring
1.
With the ignition on, the orange and red
warning lamps come on.
2.
With the engine running, these warning
lamps go off.
If a warning lamp remains on, refer to
the relevant page.
Warning lamps
19
A.
"Neutral" position.
B.
Energy consumption.
C.
"Eco" zone.
D.
"Charge" zone.
Energy consumption/
generation indicator
27
Four successive aler ts indicate that the energy
available in the main battery is dropping to a
low level:
- 2 bars of the energy gauge in the
instrument panel, on and flashing:
star ting to use the reser ve.
- The last bar in the energy gauge flashing.
- The last bar disappears:
display of the range disappears; the heating
and air conditioning are switched off.
Low energy alerts
- Display of this warning lamp in
the instrument panel:
Progressive reduction in the
power available from the motor.
26
Page 19 of 164
.Familiarisation
17
For more economical driving, and increased range
Practical advice for everyday use to optimise the range of your vehicle by conser ving battery power.
Adopt a smooth driving
style
The electrical consumption of your vehicle
depends greatly on your journey, your driving
style and your speed.
In all cases, adopt a smooth driving style.
Stay in the "Eco" zone
indicated in the energy
consumption/generation meter: depress the
accelerator pedal progressively, without sudden
movement, and if the conditions permit, drive at
steady and moderate speed.
Recover energy
Anticipating the driving conditions allows you to
recover energy and increase the range of your
vehicle.
Use the "Charge" zone
of the energy
consumption/generation meter whenever
possible: anticipate the traffic slowing
down and if the the conditions permit, use
deceleration rather than the brakes.
Control the use of your
electrical equipment
The heating and air conditioning systems
operate on energy from the main battery.
Excessive use of these systems greatly
reduces the range of your vehicle. Remember
to switch them off once the desired level of
comfor t is reached and check their settings
every time you set off.
Control also the use of demisting/defrosting
and the heated seat.
Limit the causes of excess
consumption
As with any vehicle, limit the loads carried
in the vehicle and reduce wind resistance
(windows open above 30 mph (50 km/h), roof
bars, roof box, …).
Observe the recommendations
on maintenance
Check the tyre pressures regularly and
follow the schedule for routine ser vicing
recommended by CITROËN.
Page 28 of 164
Monitoring
26
Main battery state of charge indicator
Display
Four successive aler ts indicate that the energy
available in the main battery is dropping to a
low level:
- 2 bars of the state of charge gauge in
the instrument panel, on and flashing:
star ting to use the reser ve.
- The last bar in the state of charge gauge
flashing.
- The last bar disappears: display of the
range disappears; the heating and air
conditioning are switched off.
Low energy alerts
- Display of this warning lamp in
the instrument panel: progressive
reduction in the power available
from the motor.
The state of charge of the main battery is
displayed continuously in the instrument panel.
Page 29 of 164
1
Monitoring
27
Energy consumption/generation indicator
Energy consumption
On switching on the ignition, your vehicle
neither consumes nor generates energy in its
electric traction system: the needle is in the
"neutral" position (provided that the heating and
air conditioning are off).
"Eco" zone
A system that informs the driver of the level of energy consumption or generation of the main battery.
"Neutral" position
"Charge" zone
The needle moves to the right in propor tion to
the energy consumption by the vehicle. The needle is in this zone when the vehicle is
used so as to moderate electric consumption
and optimise its range.
The needle moves to the left in propor tion to
the level of charge sent to the main battery,
during period of deceleration and braking.
Page 32 of 164
i
i
i
Monitoring
30
This function gives an estimate of the number
of miles (km) that your vehicle can still cover,
based on the recent conditions of use (driving
style, use of heating, air conditioning...).
Range indicator
When the remaining range falls to a low level,
"- - -"
is displayed in the instrument panel.
The display of "---"
, indicating that
the ser vice date has arrived, comes on
automatically after a cer tain time and
distance travelled. The screen then
indicates the time remaining before
the next ser vice is due.
Resetting the service indicator to zero
After each ser vice, the ser vice indicator should
be rest to zero.
The procedures is as follows:
)
Switch off the ignition (switch in the LOCK
or ACC position).
)
Press the reset button A
several times in
succession until the ser vice indicator is
displayed.
)
Press and hold the reset button for a few
seconds until the spanner flashes
.
)
Press the reset button while the spanner is
flashing to change the display from "---"
to
"CLEAR"
.
The distance (or time) remaining before
the next ser vice is due is displayed. The range can be displayed in miles or
kilometres.
To change the units, refer to the
"Distance recorder" section.
Page 41 of 164
3
!
Comfort
39
Head restraint height adjustment
)
To raise it, pull upwards.
)
To lower it, push it downwards, pressing
the height adjustment button at the same
time.
)
To remove it, raise it to the high position,
then remove it pressing the height
adjustment button at the same time.
)
To refit it, engage the rods of the head
restraint in the aper tures, pressing the
height adjustment button at the same time. Never drive with the removed head
restraints in the vehicle as they could
be thrown around the vehicle on sharp
braking. They must always be in place
and adjusted correctly.
After installing the head restraint, check
that the height adjustment button has
engaged correctly.
The adjustment is correct when the top
of the head restraint is aligned with the
top of the head of the seated person.
Press the control switch, located on the
dashboard, to switch on the driver's seat
heating.
The warning lamp in the switch comes on.
The temperature is controlled automatically.
Pressing a second time stops operation.
Heated seat control
