2011 BUICK LACROSSE steering

[x] Cancel search: steering

Page 254 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (4,1)Buick LaCrosse Owner Manual - 2011
9-4 Driving and Operating
And, of course, actual stopping
distances vary greatly with the
surface of the road, whether it is
pavement or gravel; the

Page 255 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (5,1)Buick LaCrosse Owner Manual - 2011
Driving and Operating 9-5
Steering Tips
It is important to take curves at a
reasonable speed.
Traction in a curve depends on
the condition of the ti

Page 256 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (6,1)Buick LaCrosse Owner Manual - 2011
9-6 Driving and Operating
Off-Road Recovery
The vehicle's right wheels can drop
off the edge of a road onto the
shoulder while driving.
If the l

Page 257 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (7,1)Buick LaCrosse Owner Manual - 2011
Driving and Operating 9-7
Of course, traction is reduced when
water, snow, ice, gravel, or other
material is on the road. For safety,
slow down and

Page 259 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (9,1)Buick LaCrosse Owner Manual - 2011
Driving and Operating 9-9
{WARNING
Coasting downhill in N (Neutral)
or with the ignition off is
dangerous. The brakes will
have to do all the work o

Page 261 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (11,1)Buick LaCrosse Owner Manual - 2011
Driving and Operating 9-11
To save fuel, run the engine for only
short periods as needed to warm
the vehicle and then shut the engine
off and close

Page 267 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (17,1)Buick LaCrosse Owner Manual - 2011
Driving and Operating 9-17
Vehicle speeds above
110 km/h (68 mph) should
be limited to five minutes
per use.
.Avoid making hard stops
for the first

Page 268 of 462

BUICK LACROSSE 2011  Owners Manual Black plate (18,1)Buick LaCrosse Owner Manual - 2011
9-18 Driving and Operating
In an emergency, if the vehicle must
be shut off while driving:
1. Brake using a firm and steadypressure. Do not pump th