
Adjustments
46 Depending on the equipment version, it may be 
possible to fold down the outer rear head 
restraints as well.
Only fold the head restraints down if no 
passengers will be sitting in the rear. Fold 
up the head restraints before transporting pas-
sengers in the rear.<
Heated seats*
Press the button once per temperature level. 
Three LEDs indicate the highest temperature.
To switch off:
Press button longer.
If you continue driving within approx. the next 
15 minutes, the seat heating is automatically 
activated at the previously set temperature.
The temperature is lowered or the heating is 
switched off entirely to save on battery power. 
The LEDs stay lit.
Seat and mirror memory*
You can store and call up two different combi-
nations of driver's seat and exterior mirror posi-
tions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.
Storing
1.Switch on radio readiness or the ignition, 
refer to page55.
2.Adjust the seat and exterior mirrors to the 
desired positions.
3.Press the  button.
The LED in the button lights up.
4.Press the desired memory button 1 or 2: the 
LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up the memory while you are 
driving; otherwise, unexpected seat 
movement could result in an accident.<
Comfort function
1.Unlock and open the driver's door or switch 
on radio readiness, refer to page55.
2.Briefly press the desired memory button1 
or 2.
The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.
Safety feature
1.Close the driver's door and switch the igni-
tion on or off, refer to page55.
2.Press the desired memory button1 or2 
and keep it pressed until the adjustment 
process has been completed.
If the  button was pressed accidentally:
Press the button again; the LED goes out. 

Controls
 47Reference
At a glance
Driving tips
Communications
Navigation
Entertainment
Mobility
Call-up with the remote control
The driver's seat position last set is stored for 
the remote control currently in use.
You can select whether or not the seat is reset 
to that position automatically.
When this Personal Profile function is 
used, first make sure that the footwell 
behind the driver's seat is free of obstacles. 
Failure to do so could cause injury to persons or 
damage to objects as a result of a rearward 
movement of the seat.<
The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.
Selecting automatic call-up
1."Settings"
2."Door locks"
3."Last seat position auto."
 The function for automatically calling up 
the last seat position is switched on and is 
stored for the remote control currently in use.
Switching off automatic call-up
Deactivate "Last seat position automatic".
Safety belts
Observe the adjustment instructions on 
page43 to ensure the best possible per-
sonal protection.<
Before every drive, make sure that all occupants 
wear their safety belts. Airbags complement the 
safety belt as an additional safety device, but 
they do not represent a substitute.On the rear seats, the center belt buckle marked 
with the letters CENTER is solely intended for 
the center passenger.
Closing
Make sure you hear the latch plate engage in 
the belt buckle.
The upper belt anchor is suitable for adults of 
any stature as long as the seat is adjusted prop-
erly, refer to page43.
Opening
1.Grasp the belt firmly.
2.Press the red button in the buckle.
3.Guide the belt into its reel.
"Fasten safety belts" reminder for 
driver's and front passenger seat
The indicator lamps light up and an 
acoustic signal sounds. In addition, a 
message appears on the Control Dis-
play. Check whether the safety belt 
has been fastened correctly.
The "Fasten safety belts" reminder is issued as 
long as the driver's safety belt has not been fas-
tened. The "Fasten safety belts" reminder is 
also activated at road speeds above approx. 
5 mph or 8 km/h if the front passenger safety 
belt is not fastened, if objects are placed on the 
front passenger seat, or if driver or front pas-
senger unfasten their safety belts. 

Adjustments
48
Damage to safety belts
If the safety belts are damaged or 
stressed in an accident: have the belt 
system, including any belt tensioners or child 
restraint systems, replaced and the belt 
anchors checked. Have this work done only by 
your BMW center or at a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise, it is 
not guaranteed that the safety devices will func-
tion properly.<
Rear center safety belt
With through-loading system*:
Before using the center rear seat, release the 
latch plate from the fixture on the rear window 
shelf and insert it into the belt lock of the center 
safety belt. Make sure you hear the latch plate 
engage.
Mirrors
Exterior mirrors
The front passenger's mirror is more con-
vex than the driver's mirror. The objects 
seen in the mirror are closer than they appear. 
Do not gauge your distance from traffic behind 
you on the basis of what you see in the mirror; 
otherwise, there is an increased risk of an acci-
dent.<1Adjustments
2Switching to the other mirror or automatic 
curb monitor
*
3Folding mirrors in and out*
The setting for the exterior mirrors is stored for 
the remote control currently in use
*. The stored 
position is called up automatically when the 
vehicle is unlocked.
Manual adjustment
The mirrors can also be adjusted manually: 
press the edge of the glass.
Folding mirrors in and out*
At driving speeds up to approx. 12 mph/20 km/
h, you can fold the mirrors in and out by press-
ing button3. This can be beneficial in narrow 
streets, for example, or for moving mirrors that 
were folded in by hand back out into their cor-
rect positions. Mirrors that were folded in are 
folded out automatically at a speed of approx. 
25 mph/40 km/h.
Before entering an automatic car wash, 
fold in the exterior mirrors manually or 
with button3 to prevent them from being dam-
aged, depending on the width of the vehicle.<
Automatic heating*
Depending on the outside temperature, both 
exterior mirrors are heated automatically when 
the engine is running or the ignition is switched 
on. 

Technology for driving comfort and safety
94
Airbags
The following airbags are located under the 
marked covers:
1Front airbags
2Head airbags
3Side airbags in the seat backrests
Protective action
Observe the adjustment instructions on 
page42 to ensure the best possible per-
sonal protection.<
The front airbags help protect the driver and 
front passenger by responding to frontal 
impacts in which safety belts alone cannot pro-
vide adequate restraint. When needed, the 
head and side airbags help provide protection in 
the event of side impact. The relevant side air-
bag supports the side upper body area. The 
head air bag supports the head.
The airbags have been designed to not be trig-
gered in every collision situation, e.g. not in 
minor accidents or rear-end collisions.
Do not apply adhesive materials to the 
cover panels of the airbags, cover them or 
modify them in any other way.
Keep the dashboard and windows on the front 
passenger side clear, i.e. do not cover with 
adhesive labels or coverings, and do not attach 
holders such as for navigation instruments or 
mobile phones.
Do not attach seat covers, cushions or other 
objects not specifically approved for seats with 
integral side airbags to the front seats. Do not 
hang items of clothing such as coats or jackets 
over the backrests. Do not attempt to remove the airbag retention system from the vehicle. Do 
not modify the individual components of the 
system or its wiring in any way. This includes 
the upholstered covers on the steering wheel, 
instrument panel, seats and roof posts, as well 
as the sides of the roof lining. Do not attempt to 
remove or dismantle the steering wheel.
Do not touch the individual components imme-
diately after the system has been triggered, 
because there is a danger of burns.
In the event of malfunctions, deactivation or 
triggering of the airbag restraint system, have 
the testing, repair, removal and disposal of air-
bag generators executed only by a BMW center 
or a workshop that works according to repair 
procedures of BMW with correspondingly 
trained personnel and that has the required 
explosives licenses. Unprofessional attempts to 
work on the system could lead to failure in an 
emergency or to undesired airbag activation, 
either of which could result in personal injury.<
Warning notices and information about the air-
bags can also be found on the sun visors. 

Everything from A to Z
270 Displacement, refer to Engine 
data254
Display, refer to iDrive 
controls16
Display lighting, refer to 
Instrument lighting101
Displays
– on the Control Display16
Displays, refer to Instrument 
cluster12
Displays and controls10
Disposal
– coolant230
– remote control battery36
– vehicle battery244
Distance remaining to service, 
refer to Service 
requirements76
Distance warning, refer to 
Park Distance Control 
PDC84
Door key, refer to Remote 
control with integrated 
key26
Door lock29
Doors, emergency 
operation30
DOT Quality Grades221
Draft-free ventilation105
Drinks holders, refer to 
Cupholders112
Drive-off assistance, refer to 
Dynamic Stability Control 
DSC85
Drive-off assistant87
Driving lamps, refer to Parking 
lamps/low beams97
Driving notes122
Driving off on hills, refer to 
Drive-off assistant87
Driving stability control 
systems85
Driving through water124
Driving tips, refer to Driving 
notes122
Dry air, refer to Cooling 
function104
DSC Dynamic Stability 
Control85DTC Dynamic Traction 
Control86
– indicator/warning lamp86
DVD
– country codes163
– settings164
– video playback163
DVD menu164
DVD player, refer to CD 
player161
DVD video163
Dynamic Brake Control 
DBC85
Dynamic destination 
guidance141
Dynamic Stability Control 
DSC85
– indicator/warning lamp86
Dynamic Traction Control 
DTC
– indicator/warning lamp86
E
EBV Electronic brake-force 
distribution85
Eject button, refer to Buttons 
on the CD/DVD player150
Electrical malfunction
– door lock30
– driver's door30
– fuel filler flap202
– glass roof38
– panorama glass roof40
– trunk lid32
Electric seat adjustment43
Electric steering wheel lock
– with Comfort Access35
Electronic brake-force 
distribution EBV85
Electronic oil level check227
Electronic Stability Program 
ESP, refer to Dynamic 
Stability Control DSC85
Emergency actuation, 
automatic transmission, 
refer to Overriding selector 
lever lock60Emergency operation
– fuel filler flap, manual 
release202
Emergency operation, refer to 
Closing manually
– glass roof38
– panorama glass roof40
Emergency operation, refer to 
Manual operation
– door lock30
Emergency release
– trunk lid from inside32
Emergency Request246
Emergency services, refer to 
Roadside Assistance246
Energy, saving
– saving fuel122
Energy-conscious driving, 
refer to Energy Control72
Energy Control72
Engine
– breaking in122
– data254
– overheated, refer to Coolant 
temperature72
– speed254
– starting56
– starting, Comfort Access34
– switching off56
Engine compartment226
Engine coolant, refer to 
Coolant230
Engine oil
– adding229
– alternative oil types229
– BMW Maintenance 
System231
– capacity258
– checking level227
– dipstick
227
– intervals between changes, 
refer to Service 
requirements76
Engine output, refer to Engine 
data254
Engine speed, refer to Engine 
data254
Engine starting, refer to 
Starting the engine56