2011 AUDI TT ROADSTER buttons

(!) Power wi ndow switches
@
@
©
Door hand le
Powe r locking sw itch
Adjuster control for outside mir- rors ... . ............. .... .
® Air outlets ............... . .
@ Light switch . ... .... ... .. .. .
(J) Turn signa l and high beam . .. .
@ Mu ltifunction stee ring wheel
with:
- Horn
- Drive r's ai rbag .... ... .. .. .
- Shift buttons ..... ... .. .. .
® Instrument cluster
@ Sw itches for
- Windshield wiper/washer
- Menu disp lay ..... ... .. .. .
43
40
59
77
53
55
1 19
9 1
10
60
21
- T rip comp uter . . . . . . . . . . . . . 20
© Steering lock/ignition/starter
switch (in the steering wheel
column) . . . . . . . . . . . . . . . . . . . 80
@ Adjustab le s teer ing column . . . 80
@ Cruise control . . . . . . . . . . . . . . 84
€3J H ood re lease . . . . . . . . . . . . . . . 178
@ Data L ink Connector (DLC) for
On Board Diagnostics ( OBD II) 28
@ Instrument lighti ng . . . . . . . . . 57
@ Switches for
- Fuel filler flap release 176
- Rea r lid re lease . . . . . . . . . . . . 41
@ Depending on opt ions: Rad io or
nav igat ion system
@ Glove compar tment ( lockable) 73
@ Front passenger's a irbag . . . . . 119
@ Rear window defogger sw itch 79
@ C limate controls . . . . . . . . . . . . 75
@ Ashtray w ith cigarette lighter . . 71
@ Selecto r l ever (S troni c) . . . . . . . 87
@) Switches for
- Audi magnet ic r ide or Sport
mode . . . . . . . . . . . . . . . . . . . . 86, 86
- Electronic Stab ilizat ion Pro-
gram ( ESP) . . . . . . . . . . . . . . . 148
- Emergency flasher . . . . . . . . . 56
Cockpi t 9
- Retractable rear spo iler .. ...
@ Switch for automatic folding
150
top . ... .. .. .. .. . .. .... ... .
@ Swi tch for wind deflector .... .
@ C up ho lder .. .. .. .......... .
@ Pa rking brake lever
(D Tips
- Some of the equipment or features
show n in the genera l illustration may be
standard equ ipme nt on your vehicle or
may be opt ional equ ipment depending
on you r model. Always as k yo ur au tho r­
ized Aud i de aler if you have a quest ion
abou t your vehi cle.
- A separate bro ch ure is p rov ided for yo ur
factory-installed audio system a nd/or
the A udi Navigation System. 48
49
71
82

Opening and closing Keys
Key set
Fig. 27 Key set
@Master key with remote control
M
-~
il
You can centrally lock and unlock your vehicle
and start the engine with the master key with
remote control.
@ Valet key
The valet key only fits the lock in the d river's
door and the ignition lock. If you have to leave
the key with somebody e lse, yo u are well -ad­
vised to turn over the valet key only.
Be aware that the rear lid and g love compa rt­
ment can be opened from ins ide the vehicle
using the release buttons .
© Emergency key
The emergency key is only for temporary use if
the vehicle key should be lost or m isplaced
¢ .&,.
Key replacement
If you lose a key, contact your authorized Audi
dealer immediately to have the
lost key d isa­
bled. Be sure to bring all your keys with you.
Registered keys
You can check to find out how many keys have
been registered to your veh icle . Therefore,
when buying a used vehicle, make sure to get all of the keys that belong to it.
Calling up the registered keys¢
page 21.
Opening and closing 35
A WARNING
-Do not leave your vehicle unattended
with the key in the ignition lock. Entry by
unauthorized persons could endanger
you o r result in theft or damage the vehi­
cle. A lways lock all doors and take the
key.
- Do not leave ch ildren unattended in the
veh icle, especially with a ccess to vehicle
keys. Unguarded access to the keys pro­
vides children the opportunity to start
the engine and/or activate vehicle sys­
tems such as the power windows etc . Un­
supervised operation of any vehicle sys­
tem by children can result in serious in­
jury.
(0 Tips
- If you open the driver's door with the key
left in the ignit ion lock, a chime w ill
sound. Th is is your reminder to remove
the key and lock the door .
- For security reasons, rep lacement keys
are only avai lable from Audi dealers.
Master key with remote control
The remote control allows you to lock or un­
lock the vehicle electronically.
Fig. 28 Fo ld-up mas ter key with remote contro l
.,. To fold the key out and back in place, press
the release button ¢
fig. 28. ..,.

Warm and cold Climate controls
Controls
W arm and cold 7 5
The air conditioning automatically maintains the selected temperature in the vehicleinterior
throughout each season .
Fig. 87 Climate contro ls
We recommend the following sett ing :
• Rotate the knob
Q fig . 87 @ to the right to
switch on the air conditioning .
• Set the temperature to 72 °F (22 °() .
• Press the
!AUTO ! Q fig. 87 button .
Using the previously recommended setting is
the quickest way to achieve a comfortable cli ­
mate in the vehicle . Th is setting should there­
fore only be changed when persona l comfort
l eve ls o r certain circumstances requ ire it .
The climate controls are a combination of au ­
tomatic heating and ventilation systems and a
cooling system which dehum idifies and coo ls
the air inside the vehicle .
The climate controls automatically maintain a temperature once it has been set. The tem­pe rat ure of the air from the v ents, fan speed
(air vo lume) and ai r distribu tion are also auto­
mat ica lly adjusted . The system a lso takes into
account strong sunshine so that manua l ad ­
justment is not necessary . So in almost all
cases,
a utomatic mode offers the best cond i­
tions for the comfort of the occupants at all
times of the year
Q page 78 .
Plea se not e:
In cooling mode, relative humidity in the inte­
rior is reduced . This prevents the w indows
from fogg ing up .
When relative hum idity and temperatures
outside are high,
condensate can drip from
the a ir cond ition ing evaporator and form a
poo l of water under the veh icle. This is normal
and not an ind ication of a leak!
When outside temperatures are low, the fan
does not switch to a higher speed until the coolant has reached an adequate tempera ­
tu re , with the exception of the defrost set­
t ing.
When accelerating at wide-open throttle, the
air condit ioning compressor is temporar ily
switched off to maintain full engine power.
In order to ensure engine cooling under ex­
treme engine loads, the compressor is switch­
ed off if coolant temperatures cl imb too high .
Funct ions are set by turn ing the rotary knob
or switched o n and off by tapping the buttons.
1111-

76 Warm and cold
The L ED in the buttons i lluminates when the
function is active .
Button (s) Meaning
Rotary Temperature selection
knob (!)
¢page 76
Rotary Switch air conditioning on/
knob (2)~ off (Fan)
¢
page 76
Rotary Air distribution
knob @
¢page 77
~
Defrost
¢page 78
~
Rear window defogger
¢page 79
Heated seat * driver/passen-I-.; +I
ger side ¢ page 79
~
Recirculation
¢page 78
l[g] Switch on cooling system
¢page 78
Pollutant filter
The pollutant filter (particle filter) ensures
that contaminants in the outs ide a ir (such as
dust or pollen) are greatly reduced or stop­ ped . T he air is also f iltered in recircu lation
mode .
The pollutant filter element must be changed
according to the intervals specified in the
maintenance schedule so that the air condi ­
tioning system's performance is not adversely
affected.
If the filter's effect iveness is weakened by
d riving the vehicle in areas with heavily pollut ­
ed outside air, the filt er element should also
be cha nged in between the listed services.
.&, WARNING
For safety reasons, i t is impo rtant t hat all
w indows are free o f ice, snow, and conden­
sa tion . Only then is good visib ility ensured .
Please familiarize yourse lf wit h the co rrect
operation of the air conditioning and how
to de humid ify/defrost the windows.
'
(D Note
- If you suspect that the climate controls
have been damaged, switch the system
off to avoid damaging it, and have it in­
spected by an authorized Audi dealer.
-Audi cl imate control system repairs re­
quire special expertise and the proper
tools. You should contact an author ized
Audi dea ler in the event of malfunct ions.
(D Tips
- To avoid adversely affecting heat ing and
cooling performance and to prevent c on­
de nsation on the w indows, the air i ntake
in front of the wi ndshield must be free of
ice, s now, and leaves.
- T he a ir com ing from the ven ts and circu­
lat ing t hrough the e ntire interio r is ex­
tra cted throug h the o utlet s lots in the
side p ane ls in the lugg age comp artmen t.
Mak e sure th at the ou tlet slots are no t
covered by clothing, e tc.
- C limate cont ro l wor ks mos t effectively if
t he win dows a re closed. Howeve r, if the
interio r of a par ked veh icle is ext reme ly
hot from the sun's rays, briefly opening
the windows can speed up the cooling
process.
Setting temperature
.,. Turn the rotary knob(!)¢
page 75, fig. 87
to the desired temperature setting.
To set a lower temperature, turn the rotary
knob to the left . To set a hig her tempe rature,
tu rn the rotary knob to the r igh t. There are
additional intermediate settings availab le to
adjust the tempe rat ure as needed .
Switching climate control on and off
Switching the climate control system on
and off
.,. Turn the knob@¢
page 75, fig. 87 to the
right to switc h climate cont ro l on. The LED
next to the word OFF goes out . ..,.

Programming the Homelink®
transmitter
The transmitter is programmed in two phas­
es. For rolling code transmitters, a third
phase is also necessary.
F ig . 104 Overhead console: Homelink ® keypad
Fig. 105 Front bumper, driver side: locat ion of trans ­
mitte r unit
Phase 1:
programming the overhead keypad
1. Make sure your vehicle is w ith in operat ing
ra nge of the remote controlled garage
door opener .
2. Set the parking brake~&.
in General in­
formation on page 94.
3. Turn the ignition on . Do not start the en­
g ine!
4 . Press and hold the two outside Home­
Link ® buttons
(D and @for approxi­
mately 20 seconds until indicator light@
~ fig. 104 begins to flash . Then release
both buttons . Do not hold the buttons for
longer than 30 seconds.
.. This procedure only needs to be performed
once. It erases the factory-set default codes
and does not have to be repeated to pro­
gram additional remote controls .
Homelin k® 95
5. Press and ho ld the Homelink ® button (D ,
@ or§ until the indicator light@
starts flashing
slowly . Release the button.
.. The system will remain in programming
mode for 5 minutes.
Go to the front of the
vehicle and proceed with phase 2 .
Phase 2:
programming the bumper mounted trans
mitter
6. Hold the original remote control at a d is­
tance between
0 -6 in. (0 -15 cm) from the
bumper below the appropr iate headlight
for your vehicleQ
fig . 105 (use the short­
est distance possible) .
7. Aim the remote control just below the
driver side headligh t.
8. Press and hold the activation button on
the remote control.
.. May be different in Canada . If so, press and
re-press (cycle) the activation button on your
remote control every two seconds .
9. The emergency flashers will flash
three
times
(after about 15-60 seconds) when
the programming is successful. Re lease
the button on the remote control.
.. To program more devices, repeat steps 4 to
9.
10. Press and hold the trained Homelink ®
button and observe the indicator light @
Qfig . 104.
.. If the indicator light is solid/continuous,
programm ing is complete and your device
should activate when you press and release
the trained Homelink ® button.
.. If the indicator light blinks rapidly for 2 sec ­
onds and is then a solid/continuous light,
proceed w ith phase 3 to program a rolling
code device.
Phase 3: rolling code programming
.. A second person on a ladder who can safely
reach the garage door opener motor is rec ­
ommended .
11. Locate the "learn" button on the garage
door opener motor (refer to the operating
instructions for the opener, as the loca­
tion of this button may vary by manufac­
turer) .

When completed, the Homelink® system will
be in the programming mode and is then
ready to learn the codes for remote contro lled
devices.
@ Tips
- Programmed buttons cannot be erased
individually.
- For security reasons you are advised to
erase the programming of the Home­
Link ® system before you sell your vehicle. H
om elin k® 97