2011 AUDI R8 SPYDER display

Automatic operation
Applies to vehicles: with R tronic
The forward gears are shi~ed up or down au­
tomatically.
S tartin g from a stop
.. Press and hold the brake pedal.
.. Tap the se lector lever towards A.
.. Release the brake pedal and acce lerate
c::, A.
in Manual operation on page 86.
Under certain circumstances (driving in the
mounta ins for example), it can be beneficial
to switch temporarily to the manua l shift pro­
gram
c::> page 86 in order to adjust the gear ra­
tios to driving conditions manually.
Kick-down
Applies to vehicles : with R tronic
When you depress the accelerator pedal be­
yond the resistance point, R tronic downshifts
into a lower gear, depending on vehicle speed
and engine rpm . The ups hift into the next
h igher gear takes place once the max imum
specified engine speed is reached. Exception:
You have activated the sport funct ion.
A WARNING
Please note that the d rive whee ls can spin
if kick -down is used on a smooth slippery
road - there is a risk of skidding .
Launch Control
Program
Applies to vehicles : with R tronic
The Launch Control Program enables maxi­
mum acceleration.
Requirement: The engine must be at operat­
ing temperature and the steering wheel must
not be turned .
.. With the engine running, press the
[!I but­
ton one t ime. The ESP indicator light
fi in
the Driver Information System display illu­ minates and the message
ESP sp ort -W arn­
in g! Re str icte d s tab ility
appears .
Autom ated manual tr an sm iss ion 8 7
.. Press the brake pedal with your left foot and
hold it down.
.. Engage a gear.
.. Press the
ISPORT I button on the selector lev­
er cover.
.. Press the accelerator pedal w ith your right
foot simultaneously unt il the eng ine has
reached a constant speed .
.,. Remove your left foot from the brake
c::, ,& .
A WARNING
-Always adapt your dr iv ing to the traffic
f low.
- On ly use La unch Control when road and
traffic conditions allow it and other driv­
ers will not be endangered or annoyed by
your driving and the vehicle's accelera­
tion.
- Please note that t he driving wheels can
spin and the vehicle can break away
when ESP is switched off, especially
when the road is slippery .
- Once the starting procedure is complete,
you should sw itch ESP on again by press­
ing the
[!I switch.
(D Tips
When accelerat ing using the Launch Con­
trol program, all vehicle parts are sub ject
to heavy loads. This can result in increased
wear.
Steering wheel with
shift paddles
Applies to veh icles: with R tronic
The shi~ paddles allow you to select gears
manually at the steering wheel.
F ig . 91 Sport steering wheel: S hift padd les

90 Parking system
Rear view camera coverage area
The rearview camera shows you the area be­hind your vehicle in the navigation system dis­
play. This area roughly corresponds to the
area in
¢ fig. 94 and (!) ¢fig. 95. Orientation
lines and colored surfaces are projected in the
area shown, which can help you with parking
and maneuvering. Objects that are located in
an area that is not captured by the camera@
¢ fig. 95 and that are closer to the bumper
will not appear on the navigation system dis­ play.
We recommend that you practice parking with
the rearview camera in a traffic-free location
or parking lot to become familiar with the sys­
tem, the orientation lines, and their function.
There should be sufficient light and good
weather conditions when doing so.
In the navigation system display, objects or
vehicles appear closer or further away if:
Objects or vehicles appear closer or farther
away in the navigation system if:
- you are driving in reverse gear from a level
surface onto an incline, or a downward
slope,
- you are driving in reverse gear toward pro-
truding objects.
The accuracy of the o rientation lines and blue
surfaces diminishes if:
- the rearview camera does not provide a reli­ able image, for example, in poor visibility
conditions or if the lens is dirty,
- the image on the screen is not visible due to
sun glare and reflection .
Caring for the rearview camera lens
The rearview camera is located in the center
of the vehicle above the rear license plate bracket. In order for the rearview camera to
function properly , the camera lens must be
kept clean and free of snow and ice .
- Dampen the lens with a household alcohol­
based glass cleaner , and clean the lens with
a dry cloth. - Remove
snow with a hand brush and ice
preferably with a de-icing spray
¢ (D .
A WARNING
--
-The parking system cannot replace the
driver's attention. The driver alone is re­
sponsible for parking and similar driving maneuvers .
- Sensors have blind spots in which objects
cannot be detected. Pay special attention
to small children and animals because
the sensors cannot always detect them .
- Always keep your eyes on the vehicle's
surroundings, using the rearview mirror
as well.
- Do not allow yourself to be distracted from traffic by the rearview camera pic­
tures in the navigation system display .
- If the position and the installation angle
of the camera has changed, for example,
after a rear end collision, do not continue
to use the system for safety reasons .
Have it checked by an authorized Audi
dealer or other qualified workshop.
(D Note
-Low obstacles already s ignaled by a
warning can disappear from the system's detection range as they are approached
and will not continue to be signaled. Ob­
jects such as barrier chains, trailer draw
bars, narrow painted vertical poles or
fences may not be detected by the sys­
tem, posing risk of damage.
- Never use warm or hot water to remove
snow or ice from the rearview camera
lens because the lens could crack.
- Never use products that are abrasive
when cleaning the lens.

Switching on and off
Applies to vehicles: with parking system advanced
Fig . 96 Section of the center console: Par k ass ist
switch
F ig. 97 Nav igatio n system dis p lay: visual distance d is ­
play
Switching on
.,. Switch the navigation system and the navi­
gation system disp lay on.
.,. Engage the reverse gear, or
.,. Press the
l""' I switc h in the center console
9 fig . 96. A short confirma tion tone so unds
and the indicato r light in the switch lights
up .
Sw itching between the rear v iew camera
and visual display
.,. Press the Graphic con trol button
9 page 9 2, fig . 98 to see the visua l dis­
play .
.,. Press the
Rear view contro l button to see
the rear view camera image
c) fig. 9 7.
Switching off
.,. Drive faster than 6 mph (10 km/h), o r
.,. Press the
l""' I switch, or
.,. Switch off the ignition .
Parking system 91
Segm ents in the visual display
The red segmen ts i n fro nt of and behind the
vehicle
c) fig . 97 he lp you to de termine the
distance between yo u and an obstacle. As
you r vehicle comes close r to t he obstacle, the
segments move closer to the vehicle . The col­
lision area has been reached when the next to
l ast segment is displayed. Do not continue
driv ing farther
c) .&. in General Information
on page
90!
A WARNING
- Th e nav igation system d isplay cannot
show, or c annot adequately show, cer­
tain o bjects (s uch as small posts o r gra­
ting), recesses in the groun d and pro­
trud ing parts on anothe r ca r.
- On ly use t he rearview came ra to assist
you if it shows a goo d, clear pict ure. For
examp le, the image may be affected by
the sun sh ining into the lens, d irt on the
lens or if there is a defect.
@ Tips
- The sensors m ust be kept clean and free
of s now and ice for the park assist to op­
erate .
- Yo u can change the vo lume and pitch of
the s ignals
c::> page 93 .
- What appea rs in the disp lay is time -de ­
layed.
-

92 Parking system
Reverse parking
Applies to vehicles: with park ing system advanced
Parking mode 1 con be used when parking in
a garage or into a parking space.
Fig. 98 Navigat ion syste m display : Aiming at a pa rk in g
spot
Fig. 99 Navigation syste m display: Align ing t he ve hicle
> Switch the navigation system and the dis­
play of the navigation system on .
.,. Select the reverse gear .
.,. Turn the steer ing whee l until the orange ori­
entat ion lines (;) appear in the parking spot
¢ fig. 98. Use the markings@to help yo u
estimate the distance from an obstacle .
Each marking represents 3
ft. (1 m). The
blue area represents an extension of the ve­
hicle 's outline by approximately 16
ft. (5 m)
to the rear.
> While driving in reverse gear, adjust the
steering wheel angle to fit the parking spot
with the aid of the orange orientation lines
¢ (}). @ marks the rear bumper. Stop the
vehicle once the red orientation line@
touches an object¢,&. .
A WARNING
-The rearview camera does not show the
entire area behind the vehicle ¢
page 89,
fig. 95.
Watch out especially for small children and anima
ls. The rear view cam­
era cannot always detect them, posing
risk of an accident!
- Please note that objects not touching the
ground can appear to be farther away
than they really are (for example, the
bumper of a vehicle or the rear of a
truck) . In th is case, you should not use
the orientation lines to help with park·
ing, which poses danger of an accident!
(D Note
In the navigation system display, the direc·
tion of travel of the vehicle rear is rep re­
sented depending on the steering wheel
angle . The vehi cle front swings out more
than the vehicle rear. Maintain plenty of
distance so that your outside mirror or a
corner of your vehicle does not collide with
any obstacles . This can damage to your ve­
hicle.
Parallel parking
Applies to vehicles: with parking system advanced
Use parking mode 2 to help you parallel park
along the side of a street.
Fig. 100 Navigat ion sy stem display : B lu e surfac e
alig ned wit h parking spot
Fig. 101 Navigation system display : T h e b lue curved
line contact ing t he curb

The following steps apply only when there is
no obstacle such as a wall near the parking
spot. Otherwise, please read the information
prov ided in the "Parking Next to Obstacles"
section.
~ Activate the turn signal.
~ Position yo ur vehicle parallel to the edge of
the street, approximately 3 ft. (1 m) from a parked vehicle .
~ Switch the navigation system and the nav i­
gat ion system display on.
~ Se lect reverse gear . The parking aid tu rns on
and par king mode 1 appears on the display .
~ Press the control bu tto n 1 on the nav igat io n
system ¢
fig. 100. Parking mode 2 appea rs .
~ Backup and align yo ur vehicle so the b lue
area @ borders on the rear end of the vehi­
cle or on the parking spot line. The bl ue area
represents an extension of the veh icle's out­
line by approximate ly 16 ft (5 meters) to the
rear . The long side of the blue area should
be o n the curb . The entire blue area must fit
i nto the parking spot .
~ With the veh icle s topped, tu rn the s teer ing
whee l to the r ight as far as it w ill go.
~ Back into the park ing spot until the blue
cu rve to uches the curb¢
fig. 101. Stop the
vehicle.
~ With the veh icle stopped, turn the steer ing
wheel to the left as far as it will go .
~ Continue to back into the parking spot un til
the vehicle is parked para llel to the curb .@
marks the rear bumper. Stop the vehicle
when the red orientation line@ borde rs an
object ¢.&, . Keep an eye o n the fron t of
yo ur vehicle while do ing this ¢Ci) .
Parking next to obstacles
When t here is an obstacle (such as a wall)
next to the pa rking spot, choose a spot w it h
mo re space on t he sides. Position the long
side of the b lue a rea so that there is sufficient
space from the curb. The a rea m ust no t be on
the c urb. You w ill also need to start turn ing
the steeri ng wheel much earlie r. T he re should
be a s uffic ient amo unt of space between the
curb and the blue c urve, and the blue c urve
¢
fig. 101 must not touch the curb.
Par king system 93
A WARNING
-The rearview camera does not show the
entire area behind the vehicle¢
page 89,
fig. 95 . Watch out especially for small
children and anima ls . The rea r view cam­
e ra can no t always de tect t hem, pos ing
ris k of an accident!
- P lease note that objects not touching the
g rou nd can appear to be far ther away
than they really are (for example, the
bumper of a vehicle or the rea r of a
truck) . In this case , you sho uld not use
the o rientation lines to help with park­
ing, which poses danger of an accident!
(D Note
In the navigation system disp lay, the direc ­
tion of trave l of the vehicle rear is repre ­
sented depend ing on the stee ring wheel
angle. T he veh icle front swings out more
than the vehicle rear. Ma inta in p lenty of
distance so that you r o utside m irror or a
corner of you r vehicle does no t coll ide with
any obstacles. This can damage to your ve­ hicle.
(0 Tips
The left o r right o rientation lines and su r­
faces will be disp layed, depending on the
turn s ignal being used .
Adjusting the warning tones
Applies to vehicles: wi th parking sys tem adva nced
Fi g. 102 Nav igat io n system d isplay: a djusting t he
park ing s yste m
Req uirement: The parking system m ust be
switched on.

120 Airbag sys te m
cr ashes that take place a t lower decelerations
as defined in the electronic control u nit
c:::> page 12 8, PASSENGER AIR BAG OFF light.
A lways remember, a chi ld safety seat or infant
carrier insta lled on the front seat may be
struck and knocked o ut of position by the rap­
id ly inf lating passenger's a irbag in a frontal
coll is ion. The airbag cou ld greatly reduce the
effectiveness of the child restraint and even
seriously injure the child during inflat ion .
A WARNING
A child in a rearward-facing child safety
seat insta lled on the front passenger seat
w ill be seriously injured and can be k illed if
t he front a irbag infla tes -even with an Ad­
vanced Airbag System.
- T he inflating a irbag will hit the child
safety seat or infant car rier wit h great
f orce and w ill smash the ch ild safety seat
and child against the backrest, door or
roof .
- Never install a rearward facing child
safety seat on the front passenger seat
unless the PASSENGER AIR BAG OFF
light comes on and stays on. If the PAS ­
SENGER AIR BAG OFF
light does not
come o n and stay on the inflating airbag
wi ll hit the child safe ty seat or infant car­
rie r with great fo rce and will smash the
c hild safety seat and child against the
backres t, door or roo f. Have the airbag
system inspe cted immedia tely by your
authorized Audi dealer.
- F orward-fac ing ch ild safety sea ts instal­
led on the front passenger 's seat may in ­
terfere with the deployment of the air­
bag and cause serious personal injury to
the ch ild.
A WARNING
If, in exceptional c ircumstances, you must
install a forward-facing child restra int on
the front passenger's seat:
- Always make sure the forward-fac ing
seat has been des igned and certified by its manufacturer fo
r use on a front seat
wit h a passenger front and s ide a irbag.
- Never put t he fo rward-facing child re­
straint up against or very near the instru­
ment panel.
- Always move the passenge r seat into its
rearmost pos ition in the seat's fore and
aft ad justment range, as far away from
the airbag as possible before installing
the forward-fac ing ch ild restra int. The
backrest must be ad justed to an up right
position .
- Make sure that the
PASSENGER AIR BAG
OFF
li ght comes on and stays on all the
time wheneve r the ig nit ion is switched
on.
A WARNING
To reduce the risk of serio us inju ry, ma ke
sure that the
PASSENGER AIR BAG OFF
light wi ll be displayed whenever a child re­
straint is insta lled on the front passenger
seat and the ignition is sw itched on.
- If the
PASSENGER AIR BAG OFF light
does not stay on, per form the checks de­
scribed
c:::> page 128 , Monitoring the Ad ­
vanced Airbag System.
- Never install a rearward facing child
safety seat on the front passenger seat
un less t he
PASSENGER AIR BAG OFF
lig ht comes on and stays on. If the PAS­
SENGER AIR BAG OFF
li ght does not
come on and stay on, the inf lating ai rbag
will hit the child safety seat or in fant car­
rier w ith great force and w ill sm ash the
child safety seat and child against the
backrest, door or roof. Have the a irbag
system inspected immediately by your
author ized Audi dealer.
- Always carefu lly follow instr uctions from
child restraint manufacturers when in­
stalling ch ild restra ints .
A WARNING
-If, in except iona l circumstances, you m ust
in stall a forward or rearward-facing child
restra int on the front passenger 's seat : "'

156 Intelligent technology
Dynamic energy management
While the veh icle is be ing driven , dynamic en­
e rgy management distributes the energy gen­
erated according to the needs of the individu­
a l components . It regu lates consumption, so
that more electrical energy is not being used
than is being generated and ensures an opti­ mal state of charge for the battery .
(D Tips
- But even energy management cannot
negate the limits of physics. Consider
that the power and life of a battery are li mited .
- If starting ab ility is threatened, you are
i nformed by a warn ing
<=> page 156,
Driver notification in the instrument
cluster display .
What you should know
The highest priority is given to maintaining
starting capability.
The battery is severely taxed in short-distance
driving, in city traffic and during the cold time
of year. Abu ndant electr ical energy is re­
qu ired, but only a little is generated . It is also
cr itical if the engine is not running and elect ri­
cal components are turned on. In th is in­
stance energy is being consumed but none is
being generated .
It is in precisely these situations that you w ill
notice energy management actively regulat­
ing the distrib ution of energy .
Vehicle stands for an extended period
If you do not drive your vehicle over a period
of severa l days or weeks, elect rical compo­
nents are gradually cut back o r switched off .
This reduces energy consumption and main­
tains starting capabi lity over a longer period.
Take into considerat ion that when you un lock
your vehi cle, some convenience functions,
such as the remote key or power seat adjust­
ment, may not be available. The convenience
functions will be available again when you
turn on the ignition and start the engine. With the
engine turned off
If you listen to the radio, for examp le, w ith
the engine turned off, the battery is being dis­
charged.
If starting capability is jeopardized due to en­
ergy consumption , a message appea rs in the
driver information display.
You have to start the engine to charge the batte ry.
With the engine running
Although electrical energy is generated when
the vehicle is being driven, the battery can be­
come discharged. This happens mostly when
little energy is being gene rated and a great
deal consumed and the battery's state of
charge is not optimal.
To bring the energy balance back into equili­
brium , consume rs which requ ire espec ially
large amounts of energy are temporar ily cut
back or sw itched off. Heating systems in par­
ticu lar require a great deal of energy. If you
notice, for example, that the heated seats or
the heated rear window are not heating, they
have been temporarily cut back or switched
off . These systems will be available again as
soon as the ene rgy balance has been restored.
You wi ll also notice that engine id le speed has
been increased slightly . Th is is normal and not
a cause for concern. By increasing engine idle
speed the additional energy required is gene r­
ated and the battery is charged .
Driver notification in the instrument
cluster display
If battery power drops into the range where it
can limit the ability of the engine to start, this
is shown in the instrument cluster display
with the following driver message:
(•i Low battery charge: battery will be
charged while driving
T h is not ificat io n r eminds you that the start ing
capability of the engine may be lim ited. As
soon as you start driving again, the battery .,..

stickers on the inside of the rear window
over the wires.
- To he lp prevent dirt from scratching the
window, always scrape in a forward di­
rection -pus hing the scraper away from
you -never back and forth.
Weatherstrips
To seal properly, the weatherstrips around the
front lid, doors, eng ine compartment lid, etc .
must remain pliable . Spray the weatherstrips
with silicone or coat them with talcum pow­
de r or glyce rine to retain the flexibility of t he
r u bber and to protect them against free zing
in the winte r.
A WARNING
Always read and heed a ll WARNINGS and
the information
¢page 161.
@ Tips
Keep silicone sprays off the windsh ield to
avoid wiper smear in rain.
Wheels
Regular care is required to preserve the deco­
rative appearance of the wheels . Road sa lt
and brake dust must be washed off regularly
or the wheels w ill be damaged .
Use only special acid-free cleaning agents. Yo u
can find proper wheel cleaner at authorized
Aud i dea lers and specialty stores. Do not leave
the cleaner on the wheels longer than speci­
fied. Wheel cleaners containing acid can dam­
age the surface of the wheel bolts .
Paint polish or other abras ive materials must
not be used when caring for wheels. If the
protective coating has been damaged, from
stones for example, touch up the damage as
soon as possible .
A WARNING
-Moisture and ice on brakes may affect
braking efficiency-
¢page 153, Braking.
-
Cleaning and protec tion 165
Test the brakes carefully after each vehi­
cle wash.
- Always read and heed all WARNINGS and
the information
c:;, page 161.
Exhaust tail pipes
Road salt and other corrosive materials wi ll
damage the material in the exhaust tail pipes
if they are not cleaned regularly. Do not clean
the tail pipes with wheel cleaner, pa int polish,
ch rome polish or other ab ras ive cleaners.
Clean the tail pipes with car ca re p roducts
that are suitable fo r sta inless steel.
Your authorized Audi dea ler can provide clean­
ing products that have been tested and ap­
proved for your vehicle.
Care of interior
· Radio and navigation display
The display may be cleaned with a soft cloth
and commercially-ava ilable "LCD cleaner".
The cloth should be coated lightly when the clean ing solution when cleaning the display .
(D Note
To prevent scratches, only clean the dis­
play when it is dry.
Plastic parts and imitation leather
You can clean p lastic parts and imitation
leather with a damp cloth. If this does not re­
move the d irt, you can t reat these parts only
with special
so lvent-fr ee pl astic cl eaning and
care produ ct s.
A WARNING
""' ~
Solvents can change the properties of
some p lastics and make it harder for the
a irbag to deploy.
- Never clean the instrument panel or the
surface of Airbag modu les with cleaning
products that conta in solvents.
- Products containing solvents will make
the surface of this part poro us.
•
•