2011 AUDI R8 SPYDER park assist

18 Instrument s and w arn ing /indic ato r light s
&_ WARNING
-USA models: If both, t he - warning
light a nd
th em war ning light com e
o n at the same t ime, the rear whe els
c ou ld lock up first under hard braking .
Lock-up of the rear whee l brakes can
cause loss of vehicle control and an acci­
dent. Have yo ur vehicle repaired immedi­
ately by your authorized A udi dealer or a
qualified workshop . Drive slowly and
avo id sudden, hard brake applicat ion.
- Canada models: If both, the brake warn­
ing light . and the ABS warning light
ti] come on at the same time, the rear
wheels could lock up first under hard
braking. Lock-up of the rear wheel brakes
can cause loss of vehicle control and an
acc ident . Have you r vehicle repaired im­
med iately by your authorized Audi dealer
or a q ualified wor kshop . D rive slowly and
avo id sudden, hard brake applicat ion
- If the brake warning/indicator ligh t does
not go o ut after a few seconds and the
par king brake re leased, or lights up while
yo u are d riving, the fluid level in the
brake fl uid reservoir is too low . If you be­
lieve that it is safe to do so, proceed im­
med iately at low speed to the nearest
authorized Audi dealer or qualified work­
shop and have the brake system inspect­
ed .
- Please be very carefu l and always keep in
mind that after seve ral brake applica­
t ions, yo u will need g reater pressure on
the brake pedal to stop you r vehicle.
C onsequently, you must allow for in­
creased braking d istances. Trying to
brake as quickly as usual could lead to an
acc ident.
ABS/( @) Anti-Lock Brake System
This warning/indicator light monitors the ABS
and the electronic differ ential lock (EDL).
The m light w ill come on fo r a few seconds
when the igni tion is sw itched on . The light will go out after an automatic check sequence
is comp leted .
There is a malfunction in the ABS when:
-The warn ing/indica to r li gh t does no t illum i­
nate when you sw itch o n the ign ition.
- The warning/ indicato r light does not go out
after a few seconds.
- The warning/ indicator light illum inates
while d rivi ng.
The brake system will still respo nd even with­
out the assistance of the ABS system. See
your autho rized Aud i dea le r as soon as possi­
ble to restore full braking performance . Fo r
more inform ation regard ing the ABS
r::?v page 150 .
The ABS war ning light and the brake warning
li ght come on together. The A BS will not work
and yo u will no tice a change in brak ing re ­
sponse and perfo rmance .
Malfunction in the brake system
USA models: If both, the -warning light
and
the m warn ing light come on
r::?v page 32 whe n the par king b rake is re­
l eased , there may be a ma lf u nct ion in the
ABS, and there may a lso be a malf unct ion in
t h e brake system itse lf
r::?v &. .
Canada models: If bo th, the brake warn ing
li gh t. and the ABS wa rning light
£1 come
on
r::?v page 32 when the parking brake is re ­
leased , there may be a malf unct ion in the
ABS, and there may also b e a malfunction in
the brake system itself ¢ &. .
Malfunction in the electronic differential
lo ck (EDL)
The two systems EDL and ABS work together.
The m warning light will come on if there is
a malfunction in the EDL system
r::?v page 150.
See your au thor ized Audi dealer as soon as
poss ible .
&_ WARNING
-If the m warning light does not go
out, or if it comes on wh ile driving, the
ABS system is not working properly. The

24 Driver information system
Menu display
Introduction
.____ __ ®
Fig. 13 Wiper lever: Controls for the men u disp lay
. Displa Type
~Set
!: Cfiecl< --,
Menu off
Fig. 14 Display: Start me nu
Some functions in your vehicle can be set, ac­
tivated, and controlled by
Menus (e.g. Acous­
tic park assist*). With these menus you can al­
so select the information shown in the Driver
Information System, which operates only with
the ign ition switched on . Operation is control­
led by the
I RESET ! button and the rocker
switch on the wiper lever¢ fig. 13.
The
Start menu shows you the different dis­
play types:
Set
Check
Menu off
Each display type in the Start menu contains a
submenu with additiona l opt ions .
Set Clock
¢page25
Computer
¢page25
Speed warning
¢ page29
Language
¢page25
Units (distance, fuel consump­
tion, temperature)
¢page25
Displays
Lights
¢ page55
Wipers (service position)
¢page 61
Doors (unlocking and locking
mode)
¢page39
Parking aid*
¢page89
Check Service
Chassis number
r::;, page 226
Keys
Menu off The menu display is hidden and
the lap timer appears.

32 Driver in formation system
BRAKE/((D) Brake system malfunction
The indicator light flashes if the brake fluid
level is too low, if there is a malfunction in the ABS system or when the parking brake is
engaged.
If the alllill. symbol flashes in the dis ­
play with the parking brake released, there is
a malfunction in the brake system. In addit io n
to the symbo l, one of two messages appears
i n t he displ ay:
Stop veh icle and check brak e fluid
ABS f ault! See owner 's manual
• Pull off the road and stop the vehicle.
• Obtain professiona l assistance .
USA models: if the re is a malfunction in the
A BS system,
the m warning/indicator light
i l luminates a long w ith the - system
mal function warn ing/ indicator light ¢&. .
Canada models: if there is a ma lf u nction in
the ABS system, the
li] warning/indicator
light ill uminates toget her with th e . brake
system ma lf u nction warning/indicator light
¢ &_ .
Parking brak e set
The parking brake warni ng light _ /_
(Canada models) ill uminates when the park­
ing brake is set . In additio n, a warning tone
will sound after you have dr iven for longer
than 3 seconds and faster than 3 mph (5 km/
h).
A WARNING
- Always observe the wa rnings i n
¢ page 175, Working in the engine
compartm ent,
before opening the en­
gine compa rtme nt lid and che ck ing the
brake f luid.
- Driv ing with low b rake fluid is a safety
h aza rd! S top the c ar and get profession al
assist ance.
- If the bra ke system war ning/ indicato r
ligh t illumina tes toge ther wi th the ABS
wa rning/in dicator ligh t, then the AB S system is malfunctioning
. The rear
wheels could quick ly loc k up when you
apply the brakes. This could lead to loss
of co ntrol and yo ur vehicle could slide!
Drive ca refully to the nea rest au thorized
Aud i dea le r and hav e the malfunction
corrected.
- L Engine cooling system malfunction
A malfunction in the engine cooling system
must be repaired as soon as possible .
When the. symbol in the display flashes,
then either the engine coo lant
temperature is
too high, or the coolant
level is too low. In ad­
dition to the symbo l, the following message
also appears in the d isp lay:
Switch off engine and check coolant level
• Pull off the road and stop the veh icle.
• Turnoff the engine.
• Check coolant level ¢
page 182 .
• Add coo lant if necessary ¢ page 183.
• Cont inue dr iv ing o nly afte r the engine cool­
ant wa rning/ind icator light goes out .
• Con ta ct your au thori zed Aud i dealer for as-
sis tan ce if ne cess ary.
If the engine coolant level is correct, t hen the
r adiator fa n may be the ca use of the malfunc­
t io n.
If the generator warn ing/ indicato r light
shou ld also illum inate
¢ page 17, then the
fan belt may be damaged.
A WARNING
- If you r vehicle should bre ak down for
me chanical or o ther reasons, par k at a
safe distance from mov ing traffic, tu rn
off the eng ine and tu rn on the hazard
warn ing lights ¢
page 57, Emergency
flasher.
- Never open the eng ine compartment lid
if you see or hear steam or coolant es­
caping from t he engine compartment -
-
you risk being scalded. Wait until you can .,,.

60 Clear v is ion
Moving w iper blades to the service
posit ion
.. Do not lift the wiper arms away from the
glass when they are in their parked position;
this would damage the paint on the front
lid .
.. When there is a risk of frost, make sure that
the wiper b lades are not frozen to the wind­
shield .
.. Move wipe r blades to the se rvice posit ion
¢page 61.
The windshield wipers and washer on ly work
when the ignition is turned on.
To reduce the sensit iv ity of the sensor, move
switch @down . To increase the sens itiv ity,
move the switch up. The higher you adjust the
sens itivity, the faste r th e sensor will react
when it senses moisture on the w indshield.
The pauses between w iper turns depend not
on ly on the sensitivity setting, but on the ve ­
hicle speed as well.
Du ring a temporary stop, e.g . at a t raff ic sig­
na l, the set wipe r speed is automatically re­
duced by one stage.
When the igni tion is tu rned on, the washer
jets are heated.
_& WARNING
- Wipe r blades a re cruc ial for safe driving!
Only when they are in good cond ition are
they able to clear the windows properly
to provide uncompromising visibility.
Worn or damaged wiper blades are a safety hazard ¢
page 61, Replacing
front wiper blades!
- The light/ra in sensor is only des igned to
assist and support the dr iver .
It remains
entirely the d river 's responsibility to
mon itor outs ide weather conditions and
to manually activate the w ipers as soon
as rain o r dri zzle red uces visibi lity
thro ugh t he windshie ld.
- T he windshie ld must not be treated with
water-repe llent materials. They can in­
crease glare under poor visib ility condi­
tions such as wetness, darkness, or when the s
un is low on the horizon . In addi­
tion, they can cause the w indshield w ip­
ers to chatter .
(D Note
In freezing or near freezing conditions:
- Always check that the w iper b lades are
not frozen to the g lass before you turn
the wipers on . Loosen a wiper blade
wh ich is frozen in place before operating
the wipers to prevent damage to the
w iper blade or the wiper motor.
- Do not use the w ipers to clear a frosted
window. Us ing the wipers as a conven­
ient ice scraper will destroy the wiper
blades .
- Before you take your veh icle to an auto­
matic car wash, make sure you have the
w indshield w iper system switched off
(lever in position 0), otherwise the w ind­
shield w iper system could get damaged
in the car wash if it should suddenly
come on .
(D Tips
-The windshie ld w ipers are switched off
w hen the ignit ion is turned off. Act ivate
t he winds hield wipers after the igni tion
is switched back on by moving the wind­
shield wiper lever to any position.
- Worn or d irty windshield wipe r blades
cause smearing, which can affect the op­
eration of the light/rain sensor . Check
the cond ition of your windsh ield wiper
blades regularly.
- When the wipers are switched on man­
ually and in ra in cond itions, the auto­
matic headlights turn on
¢ page 55 or
off during the day when the wipers are
no longer operating . The automat ic
head lights fu nction is avai lab le in this
case on ly w hen the light switch is in the
"A UTO" posit ion ¢
page 55, fig. 63.
-Make su re the washer fluid reservoir is
t opped off before goi ng on a long tr ip.
Look up ¢
page 188 for checking and
filling the washe r containe r.

80 On the road
The parking brake warning light_
(USA)/ . (CON) illuminates when the parking
brake is set and you switch on the ignition.
A WARNING
-
Always release the parking brake com­
pletely. A partially engaged brake will
overheat the rear brakes, reduce their ef­
fectiveness and cause excessive wear. This could lead to brake failure and an accident .
(D Note
Only after the vehicle has come to com­
plete stop, should you firmly set the park­
ing brake and
move the gearshift lever into
a gear.
Parking
To prevent a parked vehicle from rolling
away, there are a few things you should do .
.. Stop the vehicle using the brake pedal.
.. Set the parking brake firmly .
.. Switch off the engine.
.. Engage a gear
q ,&. .
What else you should do when parking
your vehicle on an incline or decline
Turn the steering wheel so that if the vehicle
should start to roll, it will roll into the curb.
A WARNING
This is how you can reduce the risk of in­
jury when leaving your vehicle.
- Never park the vehicle where it can come
in contact with dry grass, spilled fuel or
any other flammable materials.
- Never allow anyone - especially small
children - to remain in the vehicle when
it is locked. Locked doors make it more
difficult for rescuers to access the pas­
senger compartment in the event of an
emergency. Danger to life!
- Never leave children unsupervised in the
vehicle. Children could release the park­
ing brake or
move the gearshift lever out
-
of gear. The vehicle could start to roll
away and cause an accident.
- No matter what the season is, the tem­
perature in a parked vehicle can reach
dangerous levels.
Starting on hills
Applies to vehicles: with hill hold assist
Hill hold assist makes it easier to start on
hills .
The system is activated when the brake pedal
is depressed
for a few seconds.
After releasing the brake pedal, the brake
power is held for a
brief moment to prevent
the vehicle from rolling back when starting.
During this time, you can easily begin to
move
your vehicle.
A WARNING
-- If you did not begin moving immediately
after releasing the brake pedal, the vehi­
cle could begin to roll backward under
certain circumstances. Depress the brake
pedal immediately or engage the parking
brake.
- If the engine stalls, depress the brake
pedal immediately or engage the parking
brake.
- To prevent the vehicle from rolling back
unintentionally when starting in stop­
and-go traffic, keep the brake pedal de­
pressed for a few seconds before driving
off.
(D Tips
You can find out if your vehicle is equipped
with "hill hold assist" at an authorized Au­
di dealer.

Switching on and off
Applies to vehicles: with parking system advanced
Fig . 96 Section of the center console: Par k ass ist
switch
F ig. 97 Nav igatio n system dis p lay: visual distance d is ­
play
Switching on
.,. Switch the navigation system and the navi­
gation system disp lay on.
.,. Engage the reverse gear, or
.,. Press the
l""' I switc h in the center console
9 fig . 96. A short confirma tion tone so unds
and the indicato r light in the switch lights
up .
Sw itching between the rear v iew camera
and visual display
.,. Press the Graphic con trol button
9 page 9 2, fig . 98 to see the visua l dis­
play .
.,. Press the
Rear view contro l button to see
the rear view camera image
c) fig. 9 7.
Switching off
.,. Drive faster than 6 mph (10 km/h), o r
.,. Press the
l""' I switch, or
.,. Switch off the ignition .
Parking system 91
Segm ents in the visual display
The red segmen ts i n fro nt of and behind the
vehicle
c) fig . 97 he lp you to de termine the
distance between yo u and an obstacle. As
you r vehicle comes close r to t he obstacle, the
segments move closer to the vehicle . The col­
lision area has been reached when the next to
l ast segment is displayed. Do not continue
driv ing farther
c) .&. in General Information
on page
90!
A WARNING
- Th e nav igation system d isplay cannot
show, or c annot adequately show, cer­
tain o bjects (s uch as small posts o r gra­
ting), recesses in the groun d and pro­
trud ing parts on anothe r ca r.
- On ly use t he rearview came ra to assist
you if it shows a goo d, clear pict ure. For
examp le, the image may be affected by
the sun sh ining into the lens, d irt on the
lens or if there is a defect.
@ Tips
- The sensors m ust be kept clean and free
of s now and ice for the park assist to op­
erate .
- Yo u can change the vo lume and pitch of
the s ignals
c::> page 93 .
- What appea rs in the disp lay is time -de ­
layed.
-

214 What do I do now?
Using TM S, tire damage caused by foreign
bodies up to about
0.16 inch (4 mm ) in diam­
eter can be sealed reliably.
The foreign object must s tay in the t ire.
The tir e sea lant mu st not be us ed :
- for cuts or punctures in the tire which are
larger than 0.16 inch (4 mm)¢ fig. 155
(D
- for damage to the rim@
- if you have been driving with very low tire
pressures or tires with no air @
Using the
TM S is described in the section
¢ page 214, Preliminary steps.
TMS can be used at temperatures down to -
4 °F (-20 °C).
A WARNING
Take the following precautions after re­
pairing the tire:
-
- Do not drive faster than SO mph (80 km/
h)!
- Avoid full-throttle acce leration, heavy
braking and fast cornering.
- The vehicle's road behavior can be affect­
ed.
- Tires sealed w ith
TMS are intended only
for
temporar y, short-te rm u se . Dam­
aged tires must be rep laced . Drive care­
fully to the next professional repair fa ­
cility.
- After using the tire sea lant the tire pres­
sure monitoring system may no longer
work properly. Drive carefully to the next professional repair fac ility.
- TMS must NOT be used,
- for cuts or pu nctures in the ti re whi ch
are larger than 0.16 inch (4 mm)
- for damage to the r im
- if you have been dr iv ing with very low
tire pressures or t ires with no air
- Seek profess ional assistance if it is not
poss ible to repair the tire with the tire
sealant.
- The tire sealant must not come into con­
tact with sk in, eyes or clothing. -
If you get any ti re sea lant in yo ur eyes or
come into contact w ith it, rinse the af­
fected area thoroughly with clean water. Find a phys ician immediately!
- Change any clothing contaminated with
tire sealant immediately.
- Do not inha le the vapor!
- If you have swallowed tire sealant, rinse
your mouth thoroughly right away and
drink plenty of water.
- Do not induce vomit ing! Find a physi­
c ian immediately!
- I f you have allergic react ions, find a
phys ic ian immediately.
- Keep the tire sealant away from children.
(D Note
Do not use commercially avai lab le tire
sealants. The e lectr ica l components of the
tire pressure monitoring system will no longe r work properly .
@) For the sake of the environment
Used sealant bottles can be dropped off at
a recycling facility.
(D Tips
- If sea lant has run out, allow it to dry.
Then you can peel it off.
- Have the t ire sea lant rep laced every 4
years at a dealership.
Preliminary steps
Some preliminary steps are necessary for tire
repair.
.. If you have a flat tire, park the vehicle as far
as possible from moving traffic .
.. App ly the
parking b rake firmly .
.. Engage a gear.
.. Check whether a repair using the Tire Mobili­
ty System is poss ible ¢ page 213 .
.. Have a ll passengers
leave the vehicle and
stay away from the danger zone¢.&_ .
.. Take the
se alant bottl e and the electric air
pump from the luggage compartment un-
de r the floor ¢ page 213, fig. 154. ...