2011 AUDI R8 SPYDER air condition

150 Intelligent te chn olog y
Intelligent technology
Notice about data
recorded by vehicle
control modules
Your veh icle is not equipped with an Event Da­
ta Recorder (EDR), installed by some manu­
facture rs fo r the express p urpose o f capturing
data for retrieval after an accident or cras h
event. EDR's are sometimes called "crash re­
corders".
Some state laws restrict the retrieval or down­ loading of data stored by EDR 's that were in­
stalled in a vehicle for the express purpose of retrieving data after an accident or crash
event without the owner's consent.
A lthough yo ur vehicle is not equ ipped wit h an
EDR, it is equipped with a number of elect ron­
ic control modules for various v ehicl e systems
such as, for examp le, eng ine function, emis­
sion control, as well as for the airbags and
sa fety belts .
These electron ic co ntrol modules also record
vehicle-re lated data du ring norma l vehicle op­
er ation for diagno stic and repa ir purposes .
T he recording capacity of the elec tronic con­
trol modules is limited to data (no sound is re ­
corded) and only a small amount of data is ac­
tually recorded ove r a ve ry limited pe riod of
time and stored when a system fault or other condition is sensed by a cont ro l u nit. Some of
the data t hen stored may re late to vehicle
speed, direction, braking as we ll as restraint
syst em use and performanc e in the event of a
c rash or other condition. Stored data can only
be read and downloaded w ith special equip­
ment .
Electronic Stabilization
Program (ESP)
The Electronic Stabilization Program increas­
es driving stability .
Fig . 1 33 Ce nt er conso le wi th~ bu tto n
Intent and purpose
T he Anti-Lock Brake System (ABS), Elec tronic
D ifferential Lock (EDL) a nd Anti-Slip Regula ­
tion System (ASR) are integrated i n the Elec­
tronic Stabilization Program (ES P).
It increas ­
es control over the vehicle in handling condi­
tions close to the limit of "grip", such as when
acce lerat ing and cornering .
It reduces the r isk
of skidd ing under all road conditions and at
all speeds and improves vehicle stability .
When road condit ions are poor, ES P makes it
easier to start from a complete stop as well as
acce le rate a nd d rive up hills . E S P s witches o n
automatica lly when you start the engine. It
shou ld normally be activated at a ll t imes be ­
cause this ensures optimum veh icle stability .
Critical driving situations
Wi th an oversteering vehi cle ( the vehicle
tu rns too sharply and the rear wheels slide to­
ward the o utside of a cu rve), ESP primari ly
brakes the o utside front wheel, with an
un­
dersteering vehicle (the vehicle does not turn
sharp ly enough and pushes out of a curve) it
brakes the inside rear whee l or other addition­
al wheels. This brake inte rvent ion is accompa­
nied by noises .
If the speed of a wheel s lows down too m uch
rela tive to vehicle speed while braking and i t
starts to lock, brake pressure to this whee l is
reduced . This adjustment process can be felt ..,.

Braking
New brake pads
During the firs t 250 miles (4 00 km), new
b rake pads do not possess their f ull braking
effect, they have to be "broken in" first. The
d istance can be ten times longer in ve hicles
with ceramic brakes *. Yo u can compensate f or
this slightly reduced b rak ing power by push­
in g harder on the b rake pedal. Avoid heavy
br ak ing loads during the b reak -in period.
Operating conditions and driving habits
The brakes on today's automob iles are st ill
subject to wear, depending largely on operat­
ing conditi ons and dr iv ing habits
c:> & . On ve­
hi cles that are either driven mostly in stop­
a n d-go ci ty traffic o r are d riven ha rd, the
b rake pads should be checked by you r auth or­
iz ed A udi dealer more o ften than specifie d in
the
Warranty & Maintenan ce booklet . Fail ure
to have your b rake pads inspected can res ult
i n re duced b rake performance.
O n steep slo pes, you shou ld use the b ra kin g
effec t of the eng ine. Th is w ay, yo u prevent un­
n ecessa ry wea r on the bra ke system . If you
must use yo ur brakes, do not ho ld the bra kes
down continuously. P ump the brakes at inte r­
va ls.
Moisture or road salt
A t speed s above 70 mph ( 110 k m/h) and wit h
the windshield wipe rs swi tched
on (at le ast in ­
terval stage 4), the bra ke pads are br iefly a p­
p lied against the bra ke discs. T his occ urs at
regu lar intervals witho ut the driver noticing
and prov ides for better brake response time
u nder wet condit io ns.
Unde r ce rtain conditions, for examp le, w hen
driving thr ough water or ve ry heavy rain, or
even after was hing yo ur vehicle, the brak ing
effect ca n be red uced d ue to moisture (or in
freezing conditions ice) on the brake pads. A
few ca utious brake applicat ions should d ry off
t he bra ke pads o r rem ove any ice coa tings.
The effective ness of the brakes can be reduced
when the vehicle is dr iven o n a salt-covered
Intelligent technology 153
road and the b ra kes are no t used . Li kewise,
yo u clean off accu mulated salt coatin g from
brake d iscs and pads with a few cautio us ap ­
plications of t he brake
c:> & .
Corrosion
The re may be a tendency for di rt to build up
on the brake pads and cor ros ion to form on
the discs if t he car is not driven regu la rly or
on ly for short trips w ith litt le use of the
brakes.
If the brakes are not use d frequently, o r if cor­
r os ion has formed on the discs, it is adv isa ble
to clean off the pads and d iscs by braking
firmly a few times from a moderately high
speed
c:> & .
Faults in the brake system
If you shou ld not ice a sudden in crease i n
brake pedal trave l, t hen one of the two brake
c ir cuits may have fa iled. Dr ive immediately to
the nearest qualified wor kshop to have the
damage repaired . Dr ive at reduced speed on
the way there and ant ici pate longer stopping
dis tances and high er pedal p ress ure c:> & .
Low brake fluid level
Malfunctions can occ ur in the brake system if
the brake fluid level is too low. The brake flu id
level is monitored elect ro nica lly.
Brake power assist unit
T he bra ke power assist unit increases the
pressure that you generate w ith the brake
pedal. It work s only when the engine is run­
ning.
Brake lining wear status
B ra ke lining wear may be che cke d by visual in ­
s p ection of t he condition of the bra ke pads
th ro ugh the open ings in the wheel. If neces ­
sary, the w hee l may be removed fo r thi s i n­
spect ion
c:> page 216 .
A WARNING
- You should perform braking mane uvers
f o r th e purpos e of cleaning the brake
s ys tem only if roa d condit ions permit.
•
•

154 Intelligent technology
Other road users must not be put at risk -
you may cause an accident!
- Before descending a steep grade, reduce
speed and shift transmission into a lower
gear or lower driving position . Do not
ride the brakes or hold the pedal down
too long or too often. This could cause
the brakes to get hot and diminish brak­ ing efficiency .
- Do not "ride the brakes" by resting your
foot on the pedal when you do not intend
to brake . This may cause the brakes to
overheat, premature wear and increased
stopping distance.
- Under certain climatic and operating
conditions such as passing through wa­
ter, driving in heavy rain or after washing
the vehicle, the effectiveness of the
brakes can be reduced. In winter, ice can
accumulate on the brake pads, linings,
discs and drums. Cautiously apply brakes
for a test . Brakes will dry and ice coat­
ings will be cleaned off after a few cau­
tious brake applications .
- Driving for an extended period of time on
salt-covered roads without using your
brakes can also affect braking efficiency .
Clean off accumulated salt coating from
brake discs and pads with a few cautious
brake applications.
- If you damage the front spoiler, or if you
install a different spoiler, be sure the air
flow to the front brakes is not obstruct­
ed. Otherwise the brake system could
overheat reducing the effectiveness of
the entire brake system.
- Failure of one brake circuit will impair
braking capability, resulting in increased
stopping distance. Avoid driving the vehi­
cle and have it towed to the nearest au­
thorized Audi dealer or qualified work­
shop.
- Never let the vehicle roll to a stop with
the engine shut off .
- If the brake booster is not working, for
example when towing your vehicle, or because the brake booster has somehow
been damaged, the brake pedal must be pressed considerably harder to make up
for the lack of booster assistance.
Power steering
When the engine is running , power steering
makes i t easier for the driver to steer.
Power steering helps the driver steer the vehi­
cle with little physical effort.
If the engine is not running, the power steer­
ing system is also not working . In this case ,
you will find it extremely difficult to turn the
steering wheel.
If you turn the steering fully to the left or
right when the vehicle is stationary, you place
a very heavy load on the power steering sys­
tem. Turning the steering wheel fully to the left or right will cause noise in the system. It
also reduces engine idle speed.
(D Note
Do not hold the steering turned fully to
the left or right for more than 10 seconds
when the engine is running . There is a risk
of damage to the power steering system .
(D Tips
-In the event of a power steering system
failure, or if the engine is not running
(while being towed), you will still be able
to steer the vehicle. However, you will re­
quire more effort to do so .
- If the power steering system has a leak
or is defective, you should immediately
contact a qualified workshop .
- The power steering system requires a
special hydraulic fluid. The power steer­
ing fluid reservoir is located in the en­
gine compartment. The correct hydraulic
fluid level is important for proper opera­
tion of the power steering system. The
power steering fluid level is checked ac­
cording to the Audi maintenance service
schedule.

will be recharged and the notification will go
out.
Driver notification appears and goes out
again
If this driver notification appears after the ig­
nition is turned on or while driv ing and it goes
out again after a wh ile, the battery has been
adequately recharged.
Driver notification appears and does not
go out again
If this driver notification appears after the ig­
nition is turned on or while driv ing and does
not go out again, the battery's state of charge
is not in the optimal range. Starting ability is
restricted. Have the battery checked as soon
as poss ible by an author ized Audi dealer or
qualified workshop.
Dry sump lubrication
H igh lateral and long itud inal forces affect the
engine and the vehicle during sporty driving.
Dr y sump l ubr ica tion ensures that your engine
i s supplied w ith oil and properly lub ricated
even under these conditions.
I n a "normal" veh icle the o il pump sends the
oil from the oil pan to the lubrication points in
the engine. The oil then returns to the oil pan .
I n extreme situations, the oil pump may draw
in air, which results in insufficient oil pressure.
With dry sump lubrication, the oil is not in the
oil pan (it is "d ry"), but in a separate oi l tank.
While one pump supplies the engine with oi l,
a second pump suctions the oi l out of the en­
g ine and returns it to the oil tank . Because the
oil tank is ta ll and narrow, o il pressure is con­
stant even under extreme conditions.
In addition, the oil pan in vehicles with dry
sump lubrication is noticeably sha llower. Th is
allows the engine to be installed lower in the
vehicle, bringing down the center of gravity .
This improves your vehicle's handling .
Intelligent technology 157
•
•

-Have you r vehicle maintained properly
and in accordance with the service rec­
ommendat ions in your Warranty
& Main­
tenance booklet.
- Lack of proper maintenance as well as
improper use of the vehicle will impair
the function of the Emission Control Sys­
tem and could lead to damage.
Sporty driving
Warming up and cooling down
By carefully warming up and cooling down
your vehicle, you can he lp ensure that it is not
overstressed unnecessarily during sporty driv ­
ing.
When warming up, the vehicle is driven at a maximum engine speed of
6000 RPM
(Vl0 engine) or 7000 RPM (V8 engine) in or­
der to raise the engine oil temperature to a minimum of
140 °F (60 °(). The tires also on­
ly reach their full road holding capability once
they have warmed up .
The cooling fan can continue to run in your ve­ h icle after the engine is switched
off. H owev­
er, driving the vehicle to cool it down is part ic ­
ularly important. During sporty driving, the
engine and brakes, the exhaust system, and
the t ransm ission all become ex treme ly hot.
Before you park the vehicle, you shou ld d rive
it for a few mi les/kilometers at light load in
the low rpm range to allow it to coo l down .
Driving on a track
Before you take your vehicle out on a track,
ensure that it is in perfect condition. For ex­
ample, you should check the tire tread and the brake pads . It is best to increase t ire pressure
by about 0 .3 bar .
When driving on a track, oil consumption may be somewhat higher than in "normal" opera­
tion ¢page
180.
You shou ld definitely inspect your vehicle af­
ter subjecting it to severe condit ions. Are the
brake pads OK? Is there anything unusual
Dri vin g and en vironm ent 159
about the ti res, including the inner and outer
sidewa lls (e.g . tread, blistering)? Are the air
intakes free of leaves and tire dust? Is the o il
l evel OK?
Your authorized Audi dea ler or qua lified work­
shop will be happy to undertake an inspection
before and after use on the race track.
(D Tips
- Some race tracks (e.g . steeply banked
t u rns) may affect the response of the
ESP .
- When driven on a race track, all vehicle
parts are severe ly stressed. This can re ­
sult in increased wear.
Operation and maintenance
Fuel economy, env ironme nta l impact, and
wear on your eng ine, brakes and tires largely
depend on three factors:
- your personal driving style
- operating conditions
- technical limitations
By having your ve hicle reg ularly se rv iced by an
authorized Aud i dea ler helps to ens ure that i t
r uns properly and econom ica lly. The condition
of your veh icle not only affects its safety and
ability to ho ld its va lue, it a lso affects
f u el
con sumptio n.
The amount o f oi l used is re lated to engine
load and speed .
It is normal fo r the oil consump tion of a new
engine to reac h its lowest value after a certa in
mileage has been d riven.
You must drive your veh icle about 3,000 mi les
(5,000 kilometers) before you can p rope rly
assess oil consumpt ion.
This also app lies to fue l cons umption and en­
gine output.
(D Note
- Have your veh icle ma inta ined properly
and in accordance with the service
•
•

160 Driving and en vi ro nment
recommendations in your Warranty &
Maintenance booklet . Lack of proper
maintenance as well as improper use of
the veh icle w ill impair the funct ion of
the emission control system and could
l ead to damage.
- Do not alter or remove any component of
the Em ission Contro l System unless ap­
proved by the manufacturer.
- Do not alter or remove any device, such
as heat shields, switches, ignition wires,
valves, wh ich are designed to protect
you r vehicle's Emiss ion Control System
and othe r important veh icle compo­
nen ts.
(D Tips
The consumpt ion estimates as publish ed
by the ENVIRONM EN TAL PRO TECTIO N
AG ENCY ( EPA) and Transpor t Canada may
no t correspond to yo ur actua l cons ump­
tion on the road, which will vary depend ­
ing upon vehicle load and speed, road and
weather conditions, trip length, etc.
Trailer towing
Your Audi RB is not designed to tow a trailer.
Towing a trai le r with yo ur Audi R8 is not rec­
ommended and ca n cause damage to the vehi­
cle . Damage caused by towing a tra iler is not
covered under warranty .

Cleaning and protect ion
General information
Regular core preserves vehicle value.
Regular and correct care will contribute to
maintaini ng the beauty and value of your Au­
d i. Furthermore, good care may be a condition
for substantiating a warranty cla im should
corrosion damage or paint defects occur.
Your authorized Audi R8 dealer has a variety
of
d edicat ed ve hicl e-car e produ ct s. Please
make sure you apply them correctly .
A WARNING
-Cleaning agents may be poisonous. Keep
them out of the reach of children.
- Heed all caution labels .
- Always read directions on the container before using any product. Follow the di­
rect ions carefu lly.
- Most chemical cleaners are concentrated and have to be diluted .
- Use spot removing fluids only in well
ventilated areas .
- Do not use gasoline, kerosene, d iesel
fuel, nail polis h remover or other volatile
fluids . They may be toxic, flammab le or
haza rdous in other ways. Do not wash,
wa x or d ry the vehicle wi th the ign it ion
on or the eng ine running.
- Do not clean the undersides of chassis,
fenders, wheel covers, e tc. wit h out pro­
tecting your hands and arms . You may
c u t yourself on sharp -edged metal parts .
- Moist ure and ice on brakes may imp air
braking efficiency
c:> page 153, Broking.
T est the brakes carefully each time you
wash the vehicle.
@) For the sake of the environment
Select only environmentally friend ly clean­
ing products . Leftover clean ing products
should not disposed of in the household
waste .
Cleaning and protec tion 16 1
Care of exterior
Washing your vehicle
The longer i nsect rema ins, bird dropp ings,
t ree res in , ro ad and indust rial dust, tar , soo t
particles, road salt, and o ther aggressive de­
pos its remain on the vehicle su rface, the more
lasting their destructive effect will be . High
temperatures, for example from intense s un­
light, intensify the corrosive effect.
After the end of winter road salting, the un­ derside of the vehicle shou ld be thoroughly
washed .
Automatic car washes
You must t ake the necessary precautions s uch
as clos ing t he windows and convert ible top
before using an automatic car wash.
If yo ur
vehicle has specia l accessories - e.g . spoilers,
radio antenna -it is best to speak to the oper­
ator of the car wash c:>(D .
Only use car washes where the vehicle re ­
mains stationary and the cleaning equipment
moves around the veh icle while washing and
drying. It is not possib le to use car washes
where the vehicle is moved forward on a con­
veyer
c:> ,& .
It is preferab le to wash your vehicle in a
brush less carwash .
Washing with a pow er wa sher
When was hing yo ur vehicle with a power
washe r, be sure to follow the operating in ­
structions for the power washer. This applies particu larly to the
p ressure and the spra ying
distance .
Mainta in sufficient distance from
soft materials such as rubber hoses, sound
deade ning mater ial, and the park ing aid sen­
sors* that are located i n the front or rear
bumper.
Do not use washers with
a ro tating jet or a
nozzle spraying
a h igh pr essur e je t of wate r in
any case.
IJl,-
•
•

178 Checking and filling
Engine oil
Engine oil specifications
The engine oil used in your Audi needs the
right kind of oil.
The engine in your Audi is a sophisticated
powerplant that was built to exacting specifi­
cations. This engine needs the right kind of
engine o il that meets spec ificat ions regarding
qua lity and viscos ity so that it can run
smoothly and reliably . Choos ing the righ t oi l
and changing oil w ith in the time a nd mileage
interva ls printed in your vehicle's Warranty
&
Maintenance book let matters a lot more to ­
day than it did yea rs ago. A udi has developed
a special quality standard for engine oil that
will help assure that your veh icle's eng ine will
get the lubrication it needs for proper opera­
tion .
Modern engine lubrication has taken a quan­
tum leap in the last few years. Many synthetic
oils ava ilable today provide better engine lu­
b rication that can outlast traditiona l petrole ­
um-based o ils, making them a smart choice
for use throughout the life of you r A udi .
Whether you use synthetic or petroleum­ based engine oil, the oil that you use must
conform to Audi's oil qual ity standard
VW 502 00 to help keep your veh icle 's eng ine
r unning smoo thly and help prevent t he fo r­
ma tion of harmfu l deposi ts, some times called
"s ludge," that over t ime can lead to expensive
repairs.
A t the time of pr intin g, engine o ils availab le in
the U .S . and Canad a that meet the exact ing
specifications o f A udi oil standard VW 502 00
are synthetic engine oils . This does not mean,
however, that eve ry synthetic engine oil wi ll
meet A udi oil standard VW 502 00. So a lways
be sure that you use an approved o il.
To help preve nt the formation of harmful de ­
posits use only oi l with the fo llow ing spec ifi ­
cations printed on the oil container :
Audi oil standard VW 502 00
Oil container labels may car ry the specifica ­
tion sing ly or in combination with othe r desig ­
nations and oil quality standa rds .
Viscosity
Engine o ils are graded accord ing to their vis­
cosity . Th e pr oper viscos ity grade oil fo r you r
engine de pends on clim actic o r seaso nal con­
di tions where yo u drive. You can use o il wit h a
viscosity grade o f SAE SW40 across all tem ­
perature ranges for norma l driving conditions.
However, if engine oil visco sity g rade SA E
SW40 is not ava ilable, you can a lso use v iscos­
ity grade SA E SW -30 or SA E OW -40 as long as
it meets Audi oil q ua lity standard VW 502 00
specificat ions.
Beca use engine o il that mee ts the Audi o il
standard may not be availab le everywhere
when you need it, we strong ly recommend
t h at you a lways carry with you an extra quart
( li ter) of oil that express ly conforms to the
VW 502 00 specification, in case you have to
top off the oil while on the road .
Only if the level of the oil is at or be low the
min imum ma rk on the o il dipstick - and n o oi l
that expressly conforms to Audi o il standard
VW 502 00 specifications is availab le -may
yo u top off with a high quali ty engine o il, p ref­
erably synthet ic-based, that me ets ACEA A3,
AC EA AS o r AC EA B S or A PI SL spec ifi cat io ns,
but even t hen, only in v iscosi ty g rades SA E
SW -40, SA E SW-3 0, or SAE OW-40 . However,
during the entire time between oi l change in ­
te rva ls , never top
off with more than a tota l
of 0 .5 qt/liter engine oil that does not con­
form to Audi oil specification VW 502 00.
F or more information abo ut engine oi l that
has been approved for your ve hicle, please
contact e ither yo ur authorized Aud i dea ler or
Audi C ustomer Re lations at 1 (800) 822-2834
or v is it our web site at www.audiusa.com or
www .aud icanada .ca. Here you w ill also find a
c ur rent l ist of oils (manufacturers, bra nd
names etc.) that conform to Aud i oil standa rd
vw 50 2 00.
Changing the engine oil