2011 AUDI A3 light

Instruments and warning /indicator lights
Electronic Stabilization Program (ESP}
r /
The warning/indicator light monitors the electronic
stabili zation program.
The warning/ind icator light ,., has the following functions:
• it flashes wh ile you are drivi ng, when the ESP or the ASR (Ant i-Slip
Regulation) is working .
• it ill um ina tes when yo u sw itc h on the ignition for app rox imately 2
seconds as a funct ion check .
• it illum inates w hen there is a malfunction in the ESP .
• it illum inates after the battery has been disconnected.
• it illum inates continuously when the ESP is switched off.
• it illumi nates if the re is a malfunct ion in t he ABS, s ince the ESP is
part of the ABS system.
If the ESP warning/ind icator light ill umina tes and stays on after you
have started the engine, this may mean that the co ntro l system has
tempo rari ly switched off the ESP. If this is case , you can reactivate
the ES P by sw itch ing t he ig nit ion off and the n on agai n. The
warning/indicator light should go out to show that the system is fu lly
fu nctional again .
The ESP warn ing/ind icator light will illuminate when the ignition is
switched on if th e ve hicle bat tery has been disconnected and the n
reconnected aga in . The light should go ou t after dr iv ing a short
dis tance if the steer ing whee l is turned s lig htly.
For mo re information abo ut the ESP=>
page 188 . •
Malfunction Indicator Lamp (MIL}
(USA models}/ (Canada models}
The Malfunct io n Indicator Lamp ( MIL) is part of the On -Board D iag ­
nos tic (O BD II) system. The symbol ligh ts up w hen the ign ition is
turned on and w ill tu rn off after the eng ine has star ted and has sett
led at constant idle speed . This i nd icates that the MIL is work ing
properly .
T he warn ing light ill uminates when there is a malfunction in the
engine e lectronic system. Contact yo ur a uthorized Audi dealer and
have the malfu nction co rrec ted .
For more information=>
page 20. •
High beam !§"0
T he ~D warning/indicator light illuminates when the high beams are
on or whe n yo u us e the headl ight flasher. Fo r more informat io n abou t
using the high beams, see=>
page 59. •
Turn signals ¢¢
The indicator li ght flashes when you use either tur n
signal .
Whenever yo u use the left¢ or the right¢ tu rn signa l, the indicator
light flas hes. W hen you use t he emerge ncy f lashe r, both ind icator
lights flash.
If one of the turn sign al ligh t bul bs bur n ou t, the turn signal will flash
twice as fast as normal. •
Cruise control
CRUISE (USA models}/ 0.z (Canada models}
The CRU ISE warning/indicator light illuminates when the cruise control
is activa ted. •

Airbag system !.!r
This warning/indicator light monitors the airbag and the
tensioner systems.
The !! r warning light i llum inates for a few seconds each time you
switch on the ign ition.
If the
! !r warning light does not go out, or if it illum inates while you
are d riving, or i f it s tarts to flash, t hen there is a m alfu nct io n some­
where in the system . If the light does not illum inate when you switch
on t he ignition, this also means there is a malfunction.
& WARNING
If you have a malfunction in the airbag sy stem, contact your
authorized Audi dealer immediately. Otherwise the airbag or the
belt tensioner ma y not work properly in an accident. •
Generator 0
This warning/indicator light detects a malfunction in the
generator or in the vehicle 's electrical syst em .
Th e D war ning/in dica tor lig ht ill uminates when you swit ch on t he
ign ition and must go out a fter the engine has started.
If the D war ning/ind ic at or ligh t illumina tes whi le you are d riving,
you shou ld contact you r auth o rized Audi dealer . Since the ve hicle
battery is discharging, you shou ld switch off any unnecessary elec­
t rical consume rs (fo r example , the air condi tioner) .•
Controls and equip ­
ment Safety first
Instruments and warning
/indicator lights
Safety belts ,ft-
This warn ing/indic ato r light remind s you t o put on yo ur
safety belt.
The 4'-wa rning/ind icator light illuminates when the ignition is
s w itched on to re mi nd the driver and (o n USA models only) any fro nt
passenger to put on the sa fety belt. Additionally, an acoustic warn ing
(gong) will a lso s oun d.
For more Information=>
page 135, "Safety belt wa rning light .t" . •
Brake system
BRAKE (USA)/ (CD) (Canada)
T his warn in g/in dic ato r ligh t ill umin ates whe n t he br ake
flui d level is t oo lo w o r w he n t here is a ma lfunction in the
AB S, or whe n the pa rking b rake is s et.
T he light illuminates w hen the ign it io n is tu rned on . It goes out after
t he engine has bee n sta rted and th e p arki ng bra ke is f ully re le ase d.
T hi s indicates that t he bra ke warning light is functioning properly.
If the brake warning light does not light up when the engine is
cranking or the parking brake is appl ied , there may be a malfunc­
tion in the electrical system. In this case , contact your Audi dealer .
If the ABS f ails, the A BS war ning/ indicato r light 5 (USA
models)/ (Canada mode ls) flashes toget her w it h the brake system
w ar ning/indica tor ligh t=> & .
(USA models): If the warning light
BRAKE and the warni ng lig ht illu­
m inate together, immediate ly contact your authorized Audi dealer or
qualified workshop to have all brake pads inspected=>
page 35.
Whe n the light comes on, an aud ible warn ing si gna l is also given .
Parking brake set
The BRAKE warning/indicator light i lluminates when the par king brake
is set=> &. _,.
Vehicle care Technical data

Instruments and warning/indicator lights
in. WARNING
• USA models: : If both, the BRAKE warning light and the
warning light come on at the same time, the rear wheels c ould
lo ck up fir st under hard braking . Lo ck-up of the rear wheel brakes
c a n cause loss of vehicle control and an accident. Have your vehicle
repaired immedi ate ly by your authorized Audi dealer or a qualified
workshop . Drive slowly and avoid sudden , hard brake appli cation .
• Canada models : If both, the brake warning light ((j)) and the
ABS warning light
~ come on at the same time , the rear wheels
could lock up first under hard braking . Lock-up of the rear whee l
brakes can cause loss of vehicle control and an accident. Have your
vehicle repaired immediat ely by your authorized Audi dealer or a
qualified work shop. Drive slowly and avoid sudden, hard brake
application
• If the brake warn ing/indicator light does not go out after a few
se cond s and the parking brake rel eased, or light s up while you are
driving , the fluid level in the brake fluid reservoir is too low. If you
believe that it i s safe to do so, proceed immediately at low speed
to the nearest authorized Audi dealer or qualified workshop and
have the brake system in spe cted.
• Please be very careful and always keep
in mind that after
s everal brake application s, you will need greater pressure on the
brake pedal to stop your vehicle. Consequently, you must allow
for increased braking distances. Trying to brake a s quickly a s usual
could lead to an accident. •
Anti-lock brake system B-(USA)/
(Canada)
T his war ning/indicator light monitors th e ABS and the
electronic differential lock (E DL).
The ,... ~ light will come on for a few seconds when the ignition is
switched o n. Th e light w ill go out af ter an automat ic check sequ ence
is comp lete d.
There is a malfunction in the ABS when:
• Th e warning/indicator light does not ill uminate when you swit ch
on t he ignit ion.
• Th e warning/indicator light does not go out after a few seconds.
• The warn ing/ indicator lig ht ill uminates while driv ing.
The brake system will still re spond even without the a ssistance of
the ABS system. See your authorized Audi dealer as soon as
possible to restore full braking performance.
For more information
regard ing the ABS=>
page 192.
The ABS warning light and the brake warning light come on
together. The ABS will not work and you will notice a change in
braking response and performance.
Malfunction in the brake system
USA models: If both, the BRAKE warning light and t he ABS warning
light come on =>
page 15 w hen the par king b rake is re lease d, there
may be a malfunction in the ABS, and there may a lso be a ma lfunction
in the b rake system itself=>&.
Canada models: If both , the brake warning light CCI» and the ABS
wa rni ng light come on=>
page 15 when the parking brake is
re leas ed, there may be a ma lf u nctio n in t he A BS, and there may also
be a malfunction in t he brake system itself=>& .
Malfunction in the electronic differential lock (EDL)
The two systems EDL and ABS work togethe r. T he I ,:- warning light
w ill come on if there is a malfunction in the EDL system=>
page 189.
See your authorized Audi dealer as soon as possib le .
in. WARNING
• If the 11\fl warning light doe s not go out , or if it come s on while
driving , the ABS system is not working properly . The vehicle can
then be stopped only with the brake s operating without ABS
support. You will not have the protection ABS provides. Contact
your Audi dealer as soon as possible. _,,

& WARNING (continued)
• USA model s: If both , the BRAKE warning light and the C
warning light come on at the sam e time, the rear wheels could
lock up first under hard brak ing. Lo ck-up of the rear wheel brakes
can cause los s of vehicle control and an accident. Have your vehicle
repaired immediately by your authorized Audi dealer or a qualified
workshop. Drive slowly and avoid sudden, hard brake appli cation .
• Canada models : If both, the brake warning light and the
ABS warning light
J come on at the same time, the rear wheels
could lock up first under hard b raking. Loc k-up of the rear wheel
brake s can cause loss of vehicle control and an accident . Have your
veh icle repaired immediately by your authorized Audi dealer or a
qualified workshop. Drive slowly and avoid sudden, hard brake
application •
Electro-mechanical power assist /@
If the ind icator light illuminates while you are d riving, there is a
m alfu nction in the ele ctro-mech anical steering . If the ind ic a tor ligh t
is showing , there may be a reduction in power steer ing ass ist . If
t he indi cato r light is sh owing @, there may be a tot al loss o f power
steeri ng assist . The stee ring must be inspected immediately by a
qualif ie d workshop =>
&-With the engi ne not running (e.g. when the
car is be ing towed), t he re is also no power ass ist available.
& WARNING
If there is a malfunction , the indicator light for the electro­
mechanical power a ssist illuminate s. Seek professional
assistance. •
Controls and equip ­
ment Safety first
Instruments and warning
/indicator lights
Vehicle care Technical data

& WARNING
• Nev er rely exclu sive ly on the out side temperature display to
determine if a r oad surface i s icy or not. Keep in mind that road
s urfaces, esp ecially bridg es and overpas ses, could be ice covered
and slippery even at an outside temperature above 41 °F (+5 °C) .
• Always remember, even if the "snowflake " symbol (ice
warning ) does not appear in the di splay , bla ck ice could be on the
road.
• Alway s redu ce your speed and drive with special care in cold
w eather conditions when the chance of encountering icy road
s urfaces increa se s.
[I] Tips
• If the vehicle is stat ionary, o r if you are driving at a very low speed,
the temperature shown in the display might be s light ly higher than
the act ual o utside temperat ure. Th is is caused by the heat being radi­
ated fro m the eng ine.
• On vehicles with S t ronic, the reminde rs do not appear in the
display unt il you se lect a gea r.
• O n veh icles wi th Au di Navigat io n system *, the disp lays may d if f e r
from t heir normal appearance dur ing navigation .•
Controls and equip ­
ment Safety first
Driver information display
Applies
to vehicles : w ith gea rs hi ft indicator and man ual transm issio n
Gearshift recommendation
Th is indicator can help conserve fuel.
Fig . 8 Gear shift
recommendation
I n orde r to become familiar with the gears hift indicator, begin d riving
as usua l. If the c urrent gea r is not the best o ne fo r conserv ing fuel,
the indicato r will d isp lay the recommended gear. The disp lay shows
the cu rre nt g ear a nd the recommended gear:::::, fig . 8 .
• Upshifting: The d isp lay is to the r ight of the current gear if a
higher gear i s recomme nded.
• Downshifting : The display is to the left of the current gear if a
lower gear is recommende d.
Sometimes the indicator will recommend sk ipping a gear (3
IJIJ> 5).
0 Note
Thi s ind icator should help you co nse rve fuel. It is not des ig ned to
recommend the correct gear in a ll dr iving situations. Only the dr iver
can dec ide which gear is cor rect i n certain dr iv ing s ituatio ns s uc h as
when accelerating or driving on hills.
[I] Tips
• The disp lay switches off when the clutch pedal is pressed.
Vehicle care Technical data

Driver information display
• Gear shift recommendation can be deactivated in the dr iver infor­
mation system~
page 22. •
On-Board Diagnostic system (OBD)
On-Board Diagnostics
Fig. 9 Location of
Data Link Connector
(DLC)
On-Board Diagnostics monitors the components of your emission
control system. Each controlled component in your eng ine system
has been assigned a code. In case of a malfunction, the component
wi ll be identified and the fault stored as a code in the control module
memory .
The MIL lamp may also illuminate if there is a leak in the on-board
fuel vapor recovery system.
If the Light illuminates after a refuelling,
pull off the road and stop the vehicle, then check that the fuel filler
cap is properly closed~
page 222.
In order to make an accurate diagnosis, the stored data can only be
displayed using special diagnostic equipment (generic scan tool for
OBD).
In order to connect the special diagnostic equipment, push the plug
into the Data Link Connector (DLC). The DLC is located to the right of
the engine hood release lever~ fig. 9. Your authorized
Audi dealer or a qualified service station can inter­
pret the code and perform the necessary repair.•
Malfunction Indicator Lamp (MIL) (USA
models) / (Canada models )
The Malfunction Indicator Lamp (MIL) in the instrument cluster
~ page 11, fig. 5 is part of the On-Board Diagnostic (OBD II) system.
T he warn ing/indicator light illum inates when the ignition is switched
on and goes out after the engine starts and the idle has stabilized.
This indicates that the MIL is working properly .
If the light does not go out after the engine is started, or illuminates
while you are driving, a malfunction may exist in the engine system.
If the light illuminates, the catalytic converter could be damaged.
Continue driving
with reduced power (avoiding sustained high
speeds and/or rapid accelerations) and have the condition corrected.
Contact your authorized Audi dealer.
If the light illuminates, the electronic speed limiter may also be
ma lfunction ing. For more information~
page 20, "E lectronic speed
limiter" .
An improperly closed fuel filler cap may also cause the MIL light to
illuminate~
page 222 . •
Electronic speed limiter
Your vehicle may be factory equ ipped with tires that are rated for a
maximum speed of 130 mph (210 km/h). This is less than the
maximum speed of your veh icle . To reduce the risk of sudden tire
fai lure and loss of control if the vehicle is operated at excessive
speeds, your vehicle a lso has an electronic speed limiter . The elec­
tronic speed limiter prevents your vehicle from going faster than the
tire speed rating. For more information~
page 259, "Speed rating
(letter code)".
~

Display Ty e
.,Set
. Check ·
Menu off
Fig. 1 3 Displa y: Sta rt
men u
Some functions i n your veh icle can be set, activated, and controlled
by
Menus ). With these menus you can a lso select the information
shown in the driver informat ion system, which operates o nly w ith the
ign ition switched on . Operation is contro lled by t he [
Reset ) button
and the rocke r switch on the wipe r lever~
page 22, fig . 12 .
The
Start menu shows you the different display types:
Set
Che ck
Menu off
Each display type in the Start menu contains a s ubmenu with addi­
tional options .
Controls and e quip­
m ent Vehicle
OP-eration Set
Check
Menu off
Driver information display
C lock ~page25
Computer ~ page25
Spee d alarm (speed =>page29
war ning)
Language (6 languages)
~ page25
Un its (dis tance, f uel con-=>page2 5
sumption, temperature)
Displays (gearshift rec -
=> page 19
ommendation)
Lighting * (exterior lights,
=> page57
turn s ignals) => page 59
Wiper (service position) ~page68
Doors (unlocking and => page 40,
l ocking mode, for exam-~ page 41
p le Auto Lock)
Service
~ page27
Chass is number * ~page294
Engine oil temperature *
Registe red key s
=>page38
All of the messages shown in vehicles without menu
display appear on the display screen.
•
Vehicle care Do-it-yourselt service iTechnical data

Selecting settings
The Driver Information System settings are menu­
guided.
Select your settings as follows :
Fig. 16 Display: Menu
Se ttings, com pute r
selec ted (page 1)
- Press the [Reset] button. The Start menu appears
=> page 23, fig. 13.
- Press the rocker switch until
Set is displayed.
- Press the [
Reset] button. All the menus appear.
- Press the rocker switch until the desired line is highlighted
(cursor)::::> fig . 16.
- Press the [
Reset] button.
- If necessary, scroll by selecting and activating the symbol
for "Next page" or "Previous page".
When you have selected the Computer menu and activated it by
pressing the
I Reset I button, two computer levels appear (computer
1 and computer 2). Now you have to select the level you want using
the rocke r swi tch and activate it w ith the
I Reset j button. •
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Driver inf ormation display
Efficiency program
App lies to vehicles: with t rip c omputer with efficiency prog ram
Description
Fig . 17 Display: effi­
cie ncy p rogra m
-Press the [ RESET] button@::::> page 22, fig . 11 repeat-
edly until the efficiency program appears in the display.
The efficiency program can help you to use less fuel. It evaluates
driving information in reference to fuel consumption and shows
other equipment influencing consumption as well as sh ift recom­
mendations . Fuel economy messages =>
page 26 provide tips for effi­
cient driving.
T he effic iency program uses distance and consumption data from trip
compu ter
1. If the data are de leted in the efficiency program, those
values are also reset in trip computer
1. •
Vehicle care Do-it-yourselt service iTechnical data