31
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
Autoclose (Automatic door lock operation
with car running)
When activated (on), this function automatically locks the doors
when the vehicle speed exceeds 20 km/h.
Proceed as follows to switch this function on or off:
– briefly press the SET ESC button to display a submenu;
– briefly press the SET ESC button again: the display flashes On
or Off depending on what was previously set;
– press “
Ò▲“ or “▼“ button to select;
– briefly press SET ESC button to go back to the submenu screen
or hold the button down to go back to the main menu without
saving.
– hold down SET ESC again to go back to the standard screen or
main menu, depending on which point in the menu you have
reached.
Measures (Setting the unit of measurement)
With this function is possible to set the unit of measurement in
three submenus: “Distance”, “Consumption” and “Temperature”.
To set the desired unit, proceed as follows:
– briefly press SET ESC button to display the three submenus;
– press “
Ò▲“ or“▼“ button to go from one of the three sub-
menus to the next;
– once you have selected a submenu, briefly press SET ESC but-
ton;
– if the submenu “Distances” is entered: by briefly pressing SET
ESC the display shows “km” or “mi” depending on the previous
setting;
– press “
Ò▲“ or “▼“ button to select;
– if the “Consumption” submenu is entered: by briefly pressing
SET ESC button the display shows “km/l”, “l/100km” or “mpg”
depending on the previous setting.
32
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
If the distance unit set is “km”, you can set the fuel consumption
unit (km/l or l/100) to show the amount of fuel consumed.
If the distance unit is set to mi, fuel consumption is displayed in
“mpg”.
– press “
Ò▲“ or “▼“ to select;
– if the “Temperature” submenu is entered: by briefly pressing
SET ESC button the dispaly shows °C or °F depending on the pre-
vious setting;
– press “
Ò▲“ or “▼“ to select;
When you have made the required adjustments, press SET ESC
button to go back to the submenu screen or hold the button down
to go back to the main menu screen without saving.
– hold down SET ESC button again to go back to the standard
screen or main menu, depending on which point in the menu you
have reached.
Language (Selecting the language)
Display messages can be shown in different languages: Italian,
English, German, Portuguese, Spanish, French, Dutch, Turkish and
Brazilian Portuguese.
To set the required language, proceed as follows:
– briefly press SET ESC button: the previously set language flash-
es in the display;
– press “
Ò▲“ or “▼“ to select;
– briefly press the SET ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out saving.
Warnings volume (Adjusting the
alert/warning acoustic signal volume)
With this function is possible to adjust (to eight levels) the vol-
ume of the acoustic signal which sounds in the event of alerts and
warning.
To set the desired volume, proceed as follows:
– briefly press SET ESC button: the previously set volume level
flashes in the display;
– press “
Ò▲“ or“▼“ to select;
– briefly press the SET ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out saving.
