Opening and Closing the Windows
Opening/Closing the Power Windows
102Controls
Opening/Closing the Windows/Moonroof with the Key
To open: Unlock the driver's door with the
key. Within 10 seconds of returning the key
to the central position, turn the key in the
unlock direction and hold it there.
To close: Lock the driver's door with the key.
Within 10 seconds of returning the key to
the central position, turn the key in the lock
direction and hold it there.
Release the key to stop the windows/
moonroof at the desired position. If you
want further adjustment, repeat the same
operation.
Opening/Closing the Windows/Moonroof with the Key
You cannot close the power windows with the key
when the door is open.
Close
Open
Operating the Switches Around the Steering Wheel
Rear Defogger/Heated Door Mirror Button
110Controls
Rear Defogger/Heated Door Mirror Button
Press the rear defogger and heated door
mirror button to defog the rear window and
mirrors when the ignition is in ON
II
.
The rear defogger and heated door mirrors
automatically switch off after 10-30 minutes
depending on the outside temperature.
However, if the outside temperature is 32°F
(0°C) or below, they do not automatically
switch off.
Rear Defogger/Heated Door Mirror Button NOTICE When cleaning the inside of the rear window, be
careful not to damage the heating wires.
It is critical to wipe the window from side to side
along the defogger heating wires.
This system consumes a lot of power, so turn it off
when the window has been defogged.
Also, do not use the system for a long period when
the engine is idling. This may weaken the battery,
making it difficult to start the engine.
133
Climate Control System
Continued
Controls
Using Automatic Climate Control
Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in AUTO, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
To prevent cold air from blowing in from outside,
the fan may not start immediately when the AUTO
button is pressed.
Once you have set the desired temperature, do not
use the temperature control switches more than
necessary.
Doing so may delay the time it takes to reach the
set temperature.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on AUTO, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools
down.
When you set the temperature to the lower or
upper limit, Lo or Hi is displayed.
Pressing the
button switches the climate
control system between on and off. When turned
on, the system returns to your last selection.
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger's side
control switch.
3. Press the
button to cancel.
Switching between the recirculation and fresh air modes
Press the
button and switch the mode depending on environmental
conditions.
Recirculation Mode (indicator on) : Recirculates air from the vehicle’s interior
through the system.
Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in
fresh air mode in normal situations. The automatic climate control system maintains the interior temperature you
select. The system also selects the proper mix of heated or cooled air that will as
quickly as possible, raise or lower the interior temperature to your preference.
* Not available on all models
(Recirculation) Button
(Fan Control) BarFloor and
defroster
vents Floor vents Dashboard and floor
vents, and back of
the center console
*
Dashboard vents
and back of the
center console
*
A /C (Air Conditioning)
Button AUTO Button
Driver's Side
Temperature
Control SwitchPassenger's Side
Temperature
Control Switch
Climate Control System
Using Automatic Climate Control
134Controls
Defrosting the Windshield and Windows
Pressing the
button turns the air
conditioner system on and automatically
switches the system to fresh air mode.
Press the
button again to turn off, the
system returns to the previous settings.
1. Press the
button.
2. Press the button.
To rapidly defrost the windows
Defrosting the Windshield and Windows
For your safety, make sure you have a clear
view through all the windows before driving.
Do not set the temperature near the upper or lower
limit.
When cold air hits the windshield, the outside of
the windshield may fog up.
If the side windows fog up, adjust the vents so that
the air hits the side windows. To Rapidly Defrost or Defog the Windows
After defrosting or defogging the windows, switch
over to fresh air mode.
If you keep the system in recirculation mode, the
windows may fog up from humidity. This impedes
visibility.
167
Continued
Features
Models with navigation system For models with the navigation system, see the Navigation System Manual for how
to operate Bluetooth
® HandsFreeLink
®.
Models without navigation system Bluetooth
® HandsFreeLink
® (HFL) allows you to place and receive phone calls using
your vehicle's audio system, without handling your cell phone.
Using HFL
HFL Buttons Button: Press to give a command or answer a call. Button: Press to end a call, go back to the previous command, or cancel a
command.
Bluetooth
® HandsFreeLink
®
To use HFL, you need a Bluetooth-compatible cell
phone. For a list of compatible phones,
pairing procedures, and special feature
capabilities:
U.S.: Visit t
www.acura.com/handsfreelink, or call
(888) 528-7876.
Canada: Visit
t
www.handsfreelink.ca, or call (888)
528-7876.
Voice control tips:
Aim the vents away from the ceiling and close
tthe windows, as noise coming from them may
interfere with the microphone.
Press and release the t
button before giving
a command. Speak clearly and naturally after a
beep.
If the microphone picks up voices other than
tyours, the command may be misinterpreted.
A command that consists of several words can be tspoken together. For example, say "Call 123-456-
7890" at once.
When HFL is in use, navigation voice commands tcannot be recognized.
To change the volume level, use the audio tsystem's volume knob or the remote audio
controls.
Bluetooth
® HandsFreeLink
®
(HFL Talk) Button (HFL Back) ButtonAudio Remote
VOL (Volume)
ButtonsMicrophone