2011 Acura TSX battery

Interior Lights/Interior Convenience Items
Interior Convenience Items
129
Continued
Controls
Accessory Power Sockets
There are two accessory power sockets; one
in the console compartment and the other
at the front of the center console. They
can be used when the ignition switch is in
ACCESSORY
I or ON
II
.
Open the cover to use it.
Accessory Power Sockets NOTICE Do not insert an automotive type cigarette lighter
element.
This can overheat the power socket.
The accessory power socket is designed to supply
power for 12 volt DC accessories that are rated 120
watts or less (10 amps).
To prevent battery drain, only use the power socket
with the engine running.

Interior Lights/Interior Convenience Items
Interior Convenience Items
132Controls
Seat Heaters
If the ignition switch is in ON
II
. The HI
setting heats the seats faster than the LO
setting.
There is no heater in the passenger's seat-
back due to the side airbag cutoff system.
Seat Heaters
Do not use the seat heaters even in LO when the
engine is off. Under such conditions, the battery
may be weakened, making the engine difficult to
start.
In the LO setting, the heater runs continuously and
does not automatically turn off after a period of
time.
WARNING
Heat induced burns are possible when
using seat heaters.
Persons with a diminished ability to sense
temperature (e.g., persons with diabetes,
lower-limb nerve damage, or paralysis)
or with sensitive skin should not use seat
heaters.
While in HI, the heater cycles on and off. The appropriate indicator will be on while
the seat heater is on. Briefly press the
button on the opposite side to turn the
heater off. The indicator will be off.
When a comfortable temperature is
reached, select LO to keep the seat warm.

Audio System
Auxiliary Input Jack
140Features
Auxiliary Input JackUse the jack in the console compartment to connect standard audio devices.
1. Open the AUX cover.
2. Connect a standard audio device to the
input jack using a 1/8 inch (3.5 mm) stereo
miniplug.

The audio system automatically switches
to the AUX mode.
Auxiliary Input Jack
To switch the mode, press any of the audio mode
buttons. You can return to the AUX mode by
pressing the AUX button.
You cannot use the auxiliary input jack if you
replace the audio system.
Audio System Theft ProtectionThe audio system is disabled when it is disconnected from the power source, such
as when the battery is disconnected or goes dead.
Entering the audio security code
"ENTER CODE" appears on the display when the power is reconnected.
1. Turn on the audio system.
2. Enter the audio security code using the preset buttons. If you enter an incorrect
digit, continue to the last digit, then try again. If you do not enter the code
correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial
number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information
from a dealer.

168Features
Bluetooth
® HandsFreeLink
®
Using HFL
Help FeaturesTo hear general HFL information and help, say "Tutorial." t
Say "Hands free help" or "Help" any time to get help or hear a list of t
commands.
The multi-information display notifies you
when there is an incoming call.
Information Display
Bluetooth
® HandsFreeLink
®
Bluetooth
® Wireless Technology
Bluetooth® name and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Honda Motors Co., Ltd., is
under license. Other trademarks and trade names
are those of their respective owners.
HFL Limitations
An incoming call on HFL will interrupt
Bluetooth® Audio when it is playing. Audio will
resume when the call is ended.
Information Display
The information that appears on the multi-
information display varies between phone models. Signal
StrengthHFL Mode Battery
Level
Status
Phone
Number Roam
Status

169
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
HFL MenusThe ignition switch must be in ACCESSORY
I or ON
II
to use HFL.
HFL Menus
To use HFL, you must first pair your Bluetooth-
compatible cell phone to the system while the
vehicle is parked.
Press the
(HFL Talk) button each time you give a command
"Phone setup"
"Pair""Edit""Delete""List""Status"
"Next phone"
"Set pairing code"e.g.: "123-456-####"
e.g.: "Jim Smith"
"Call" / "Dial"
"Redial""Tr a n s f e r""Mute""Send"Pair a phone to the system.
Edit the name of a paired phone.
Delete a paired phone from the system.
Hear a list of all phones paired to the system.
Hear which paired phone is linked, and its remaining battery life.
Search for another phone that has been paired.
Set the pairing code to either "Fixed" or "Random."
Say a phone number.
Say a name after a phonebook entry is stored.
Redial the last number called.
Transfer a call from HFL to your phone or from your phone to HFL.
Mute your voice to the person at the other end of the call.
Send numbers or names during a call.

171
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
Phone Setup To pair a cell phone
1. If no phone has been paired to the system before, HFL gives you information
about how to pair the first phone.
If a phone has already been paired: say "Phone Setup" and "Pair" after the HFL
prompts.
2. Follow the HFL prompts and put your phone in discovery or search mode.
HFL gives you a four-digit code and begins searching for your phone.
3. When your phone finds a Bluetooth
® device, select HFL from the options and
enter the four-digit code.
4. Follow the HFL prompts and name the newly paired phone.
To rename a paired phone
1. Say "Phone Setup."
2. Say "Edit" after the prompts.
3. Follow the HFL prompts and rename the phone.
If there is more than one phone paired to the system, HFL will ask you which
phone's name you want to change.
To delete a paired phone
1. Say "Phone Setup."
2. Say "Delete" after the prompts.
3. Follow the HFL prompts.
HFL will ask you which phone you want to delete.
Phone Setup
Press the
button and wait for a beep before
giving a command.
Yo u r Bluetooth-compatible phone must be paired
to HFL before you can make and receive hands-free
calls.
Phone Pairing Tips:
You cannot pair your phone while the vehicle is
tmoving.
Your phone must be in the t

discovery or search
mode when pairing the phone. Refer to your
phone's manual.
Up to six phones can be paired.
tYour phone's battery may drain faster when it is tpaired to HFL.
If your phone is not ready for pairing or not found tby the system within three minutes, the system
will time out and returns to idle.

173
Continued
Features
Bluetooth
® HandsFreeLink
®
HFL Menus
Making a Call
You can make calls using any phone number or a name in the HFL phonebook,
and redial the last number called.
Direct dialing a phone number
1. Say "Call" or "Dial."
2. Say the number you want to dial after the prompts.
3. Say "Call" or "Dial" after the prompts. From the HFL phonebook
1. Say "Call" or "Dial."
2. Say the name stored in the HFL phonebook after the prompts.
3. Follow the HFL prompts. To redial the last number called by HFL
Say "Redial." To end a call
Press the
(HFL back) button.
Making a Call
Press the
button and wait for a beep before
giving a command.
HFL uses a Class 2 Bluetooth, with has a maximum
range of about 30 feet (10 meters).
HFL allows you to talk up to 30 minutes after you
remove the key from the ignition switch. However,
this may weaken the vehicle's battery.

191
Continued
Driving
When DrivingStarting the Engine
1. Make sure the parking brake is applied.
Starting the Engine
Keep your foot firmly on the brake pedal when
starting the engine.
The engine is harder to start in cold weather and
in thinner air found at altitudes above 8,000 feet
(2,400 meters).
When starting the engine in cold weather, turn off
all electrical accessories such as the lights, climate
control system, and rear defogger in order to reduce
battery drain.
If exhaust sounds abnormal or you can smell
exhaust gas inside the vehicle, have your vehicle
checked by a dealer. There may be a problem with
the engine or exhaust system.
Automatic transmission models 2. Check that the shift lever is in P
, then
depress the brake pedal.
Although it is possible to start the
vehicle in N
, it is safer to start it in P
.
Manual transmission models 2. Check that the shift lever is in N
. Then
depress the brake pedal with your right
foot, and the clutch pedal with your left
foot.
The clutch pedal must be fully depressed
to start the engine.
Brake Pedal
Brake Pedal Clutch Pedal