2011 Acura MDX Owner's Manual

INITIAL SETTINGS (Language)When you select‘‘Language ’’with
the interface dial, the menu shown
above appears.
To return to the stop or previous
screen, press the CANCEL button.
Because the priority language is
determined by each disc you insert,
you might not be able to set a
selected item. Menu Language
To select the language used in the
DISC menus, select
‘‘Menu
Language ’’by pressing the
or
button.
Select the desired language by
turning the interface dial, and then
pressing the ENTER button.
The selectable languages are,
English, French, Spanish, German,
Italian, Dutch, Chinese, Korean,
Thai, Japanese or others.
If you want another language than
those listed, you need to enter the
code number of the desired
language. Select ‘‘other, ’’and press
the ENTER button. The display
changes as shown in the next
column.
Rear Entertainment System32410/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

If you select‘‘No, ’’and press the
ENTER button, the display returns to
the initial screen of the ‘‘Language ’’
menu.
If you select ‘‘Yes, ’’the display
changes to the language code input
mode. Select the first digit using the
interface dial, and press the ENTER
button to enter it. Repeat this until all
four digits are filled. Press thebutton on the control panel to enter
the new language code.
If you made a mistake entering a
number digit, press the
button on
the control panel. Then select and
enter the correct digit as described.
The display returns to the initial
‘‘ Language ’’menu screen.CONTINUED
Rear Entertainment System
325
Features
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

Audio LanguageYou can select the dubbed language
before playing DVDs.
Select‘‘Audio Language ’’by pressing
the
or
button.
Follow the same instructions you
used to set the menu language. Subtitle Language
You can select the subtitle language
before playing DVDs.
Select
‘‘Subtitle Language ’’by
pressing the
or
button.
Follow the same instructions you
used to set the menu language. Dynamic Range
‘‘
Dynamic Range ’’reduces the
differences between the loud and
quiet sound levels throughout the
disc. When this is on, the louder
sounds are lowered, and quieter
sounds are increased.
Rear Entertainment System32610/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

Select the‘‘Dynamic Range ’’by
turning the interface dial.
To turn ‘‘Dynamic Range ’’on or off,
select ‘‘ON ’’or ‘‘OFF ’’by turning the
interface dial, and then press the
ENTER button. Angle Mark
When you switch to another angle
while playing a DVD, the angle mark
is displayed in the upper right corner
of the screen.
You can set the system to display or
not display this angle mark.
Select the
‘‘Angle Mark ’’by turning
the interface dial. If you want the
angle mark to be displayed, select
‘‘ ON ’’by turning the interface dial,
and then press the ENTER button.
ANGLE MARK
CONTINUED
Rear Entertainment System
327
Features
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

Parental Level
You can place an auditory restriction
by changing the parental control
level. The higher the level number,
the lower the restriction.
Highlight‘‘Parental Level ’’and press
the ENTER button. You will see the
submenu. If you select ‘‘No ’’and
press the ENTER button, the screen
goes back to the ‘‘Others ’’menu.
When you select and enter ‘‘Yes, ’’the
display changes as shown above. To
change the level, you need to enter
your four digit password. Select the
number for the first digit by turning
the interface dial, and enter it by
pressing the ENTER button. Repeat
this until all four digits are filled.
Press the
button on the control
panel.
Rear Entertainment System32810/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

If the system does not recognize the
password you entered, you will see
the above display. Repeat the
parental control level steps until you
enter the correct password.
If you enter the password correctly,
you can then change the parental
control level.
Once you correctly enter the
password, turn the interface dial to
change the level, and then press the
ENTER button. Press the
button to
enter your selection. Changing the Password
The password was set to
‘‘1111 ’’
when the vehicle left the factory.
CONTINUED
Rear Entertainment System
329
Features
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

To change the password, select
‘‘Password.’’ You will see the above
menu displayed. Select ‘‘Yes ’’by
turning the interface dial, then press
the ENTER button.
If you select ‘‘No, ’’and press the
ENTER button, the display returns to
the ‘‘Others ’’menu.
Select the first digit by turning the
interface dial, and enter it by
pressing the ENTER button. Repeat
this until all four digits are entered.
Press the
button on the control
panel.
If the system does not recognize the
password you entered, you will see
the above display. Repeat the
password setting steps until you
enter the correct password.
Rear Entertainment System33010/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

If you forget the password, select
‘‘Password,’’ and press the
button
10 times.
The display changes as shown above.
If you want to use the default
password (1111), select ‘‘Yes, ’’and
press the ENTER button.
The message ‘‘Default password
setting applied ’’is displayed for 5
seconds. Remote Control
The rear control panel can be
detached from the ceiling unit and
used as a remote control. To remove
it from the ceiling unit, press the
release button. The control panel will
swing down partway. Pivot it down
further past the detent until it
detaches from the hinge. To reinstall
it, reverse the procedure.RELEASE BUTTON
CONTINUED
Rear Entertainment System
331
Features
10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu