2011 Acura MDX remote control

K E Y L E S S M E M O R Y S E T T I N G S
9
8
2. Check the MID:
• If you have the correct remote\b the driver ID that first appears onthe MID will match the ID number on the back of your remote.
Go to step 3.
• If the numbers do not match\b follow these simple instructions:
-Remove the key from the ignition switch.
- Press the unlock button on your remote.
- Insert the key into the ignition switch\b turnit to ON (II)\b and
check the MID. The driver ID that first appears on the MID
should now match the number on the back of your remote.
C u s t o m i z i n g S e t t i n g s U s i n g t h e M I D
1. Select “CHG SETTING.”
3. Select “AUTO DOOR
UNLOCK.”4. Select “SHIFT TO P.”
5.Select “ALL DOORS.”
6. Once the setting has been saved\b select“EXIT.”
Six groups of settings can be programmed using the MID*: Adaptive Cruise Control
(ACC) Setup (if equipped)\b Meter Setup\b Position Setup\b Lighting Setup\b
Door/Window Setup\b and Wiper Setup.
SEL/RESET
button
Info
button
Pressthe Info button to toggle to
the “Keyless Memory Settings”
display\b then pressSEL/RESET to
activate the menu.
M o d i f y i n g t h e A u t o D o o r U n l o c k S e t t i n g
* See Customized Settings in your owner’s manual for other programmable settings.
When linked\b each remote (labeled 1 or 2 on the back) activates its own set of
programmable audio\b climate\b driving position memory\b and customized settings (MID).
1. Verify that you are using the correct remote by inserting the key inthe ignition switch and turning to ON (II).
C h e c k p o i n t
2. Select “DOOR/WINDOW
SETUP.”
3. Once you have the correct remote\b you can begin to program your
Keyless Memory Settings.
As the default setting\b only the driver's door unlocks when you shift to Park.
Follow the steps below to set all doors to unlock when you shift to Park:
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f48 PM Page \b

C u s t o m i z i n g S e t t i n g s
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
Some examples on how to program vehicle settings.1.Turn the ignition switch to
ON(II).
2. Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS\b TREBLE\b etc.).
3. Set your preferred climate
control settings (fan speed\b
temperature\b etc.).
4. Once you turn the car off\b your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1. Turn the ignition switch to
ON (II). Shiftinto Park (P).3.Press and hold the MEMO
button until you hear a beep\b
then release.
2. \fdjust your preferred seat\b
steering wheel\b and outside
mirror settings.4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
* See Customized Settings in your owner’s manual for other programmable settings.
R E A R V I E W C A M E R A
For added convenience\b the area behind your vehicle is displayed to help you
navigate while backing up.
When you shift into
Reverse (R)\b a real-time
image of the area behind
your vehicle\b along with
helpful parking guide
lines\b shows in the
monitor. It turns off when
you shift out of Reverse.
H o w I t W o r k s
Press and hold the power
button for about 3 seconds.
A d j u s t i n g t h e V i e w M o d e ( B a s e M o d e l )
T u r n i n g t h e G u i d e L i n e s
O n o r O f f
Press and release the power
button.
T u r n i n g t h e R e a r v i e w
M o n i t o r O n o r O f f
Press and hold CANCEL for
about 3 seconds.
A d j u s t i n g t h e V i e w M o d e ( T e c h \b A d v a n c e )
T u r n i n g t h e G u i d e
L i n e s O n o r O f fS w i t c h i n g V i e w s
Note: A stored memory position is linked to the corresponding keyless remote
(1 or 2). Each item begins to adjust when you unlock the driver’s door with
the remote and enter the vehicle. Base Model
Base Model
Tech/\fdvance
Tech/\fdvance
There are 3 rearview modes.
Press ENTER to toggle between
views. Turnthe Interface Dial to
adjust the screen brightness.
Normal
Normal
Top down
Top down Wide
Wide
11
1\f
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f49 PM Page 7

1311
H O M E L I N K ®
Press and hold thebutton on the
remote and the HomeLin kbutton at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2seconds.
Does the LED blink at a faster ratewithin 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.a
Press and hold theprogrammed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be programmed to
operate up to three remote-controlled devices around your home\b such as garage
doors\b lighting\b or home security systems.
If you have any problems programming HomeLink\b see the owner’s manual
included with the device you are trying to program\b call HomeLink at
(8\f\f) 355-3515\b or visit www.homelink.com.
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse (R)\b you can tilt either outside door mirror down slightly to
improve your view as you parallel park. Shifting out of Reverse returns the tilted mirror
to its original position.
• To tilt the driver’s
door mirror\b movethe
mirror selector switch
to the left (L) position.
• To tilt the passenger’s side door mirror\b
move the mirror
selector switch to the
right (R) position.
• To turn the feature off\b move the switch
to the middle
position.
12
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f50 PM Page 8

3.Push USB/AUX to begin playing.
2. Connect the USB connector to your
iPod dock connector or flash drive.1. Open the center console\b and
pull out the USB adapter cable.
1. To record a song sample\b press
and hold XM for about 2 seconds.
2. To replay stored information\b push
the interface dial down. 3.
Turn the selector knob to select
“NOTE\b” then pressENTER.
4. Turn the selector knob to select a
sound file\b then pressENTER. The
selected recording plays.
B L \b E T O O T H® A U D I O( T e c h \b A d v a n c e P a c k a g e )
Play audio files from your compatible phone through your vehicle’s audio system. Visit
www.acura.com/handsfreelink to check if this feature is available on your phone.
i P o d ® o r U S B F l a s h M e m o r y( T e c h \b A d v a n c e P a c k a g e )
Play audio files from your compatible iPod or USB flash memory device through your
vehicle’s audio system. See your Owner’s Manual for a list of compatible devices.
C o n n e c t i n g a n d P l a y i n g A u d i o F i l e s
R e c o r d i n g S o n g S a m p l e s
1. Make sure your phone is on and paired to HandsFreeLink (See
page \b7).
•Press () or () on the audio
control panel. •
Press (+) or () on the remote
audio controls.
There are two ways to skip through audio files*:
2.
Press USB/AUX repeatedly until
“Bluetooth Audio” appears.
3. Press “play” on your phone;
sound is redirected to the audio
system. Make sure the phone’s
volume is adjusted.
iPod is a registered trademark of Apple Computer\b Inc.\b registered in the U.S. and other countries. iPod not included.
P l a y i n gBluet\f\fthA u d i o F i l e s
S k i p p i n g
Bluet\f\fthA u d i o F i l e sN o t e F u n c t i o n( T e c h \b A d v a n c e P a c k a g e )
Use the Note function to store up to 3\f ten-second recordings of songs and song
information from XM®Radio (with an active subscription).
31
3\f
* not supported on all phones
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f54 PM Page 17

35
34
P l a y i n g A u d i o F i l e s u s i n g V o i c e C o m m a n d s ( c o n t i n u e d )
Press and release the Talk button before you give a command.
U s i n g t h e “ L i s t ” C o m m a n d
The system
provides
voice
feedback
and lists
possible
matches.
A list of tracks
from the
selected artist
displays.
Say
"iPod search"
or "HDD search."
Say "List" and
one of the
options on the
Search Mode
screen. For
example\b say
"List Artist XYZ."
Say the
number of
your selection.
For example\b
say "One."
The system
plays the
selection and
returns to the
Search Mode
screen. Say
the
number of
the artist.
For
example\b
say "Four."
if exact
matchfound if exact
match
not found
O p e r a t i n g t h e R E S f r o m t h e F r o n t S e a t
R E A R E N T E R T A I N M E N T S Y S T E M ( R E S )( i f e q u i p p e d )
Rear passengers can enjoy a different entertainment source than the front seat
occupants. If listening to the same media source\b both the driver and the rear
passenger have the ability to control functions for that source.
1.Press REAR PWR; the DVD
monitor automatically opens.
Rear passengers hear audio
through the wireless
headphones.
2. Press REAR CTRL OFF to
disable rear audio controls.
3. Press REAR SOURCE to
temporarily hear what is
playing in the rear.
4. Select a media source for
the rear passengers. Press
FRONT SOURCE to return to
the front audio controls.
O p e r a t i n g t h e R E S f r o m t h e R e a r S e a t
1. From the front audio panel\b make sure REAR PWR is on
and rear control is not
disabled.
2. From the rear control panel\b press DVD/AUX\b DISC/HDD\b XM\b
or FM/AM to make a selection.
4. The rear control panel can be detached and used as
a remote control. Press the
RELEASE button to remove it
from the ceiling.
3. Use the ( )(
)(
)( ) buttons
to navigate the menu on the
display. Pressthe ENT button
to select a function.
11 MDX ATG\fATG_NEW STYLE 7/21/2010 5\f55 PM Page 19