Page 13 of 340
11
FAMILIARISATION
SITTING COMFORTABLY
1.
Seat cushion height, angle and slide
adjustments.
2.
Adjustment of the backrest angle.
3.
Adjustment of top of backrest.
4.
Adjustment of lumbar support height
and level.
5.
Massage function.
6.
Heated seat control.
A.
Adjustment of the backrest angle.
B.
Adjustment of the seat height.
C.
Heated seat control.
D.
Longitudinal adjustment of seat.
E.
Adjustment of the backrest lumbar
support.
Storing settings
This function allows you to programme
and store the driver’s seat and the air
conditioning settings. The correct position
for the upper seat
belt anchorage places the belt across
the middle of the shoulder.
)
To adjust the seat belt for height,
compress the control and slide
it in
the desired direction.
Seat belt height adjustment
Front seats
Electrical adjustments
Manual adjustments
62
63
122
65
Page 64 of 340
III
62
COMFORT
FRONT SEATS MANUAL ADJUSTMENTS
1.
Adjustments to the height and
angle of the head restraint
To raise it, pull upwards.
To lower it, press on the control A
to unlock it, and simultaneously
on the head restraint itself. The
adjustment is correct when the
top edge of the head restraint is
at the same height as the top of
the head. It is also tilt adjustable.
To raise it, press control A
to
unlock it, then pull it upwards.
It may be necessary to adjust the
backrest angle.
2.
Adjustment of the backrest angle
Operate the control and adjust
the position of the backrest to
the front or to the rear.
3.
Adjustment of the seat height
Raise or lower the control the
number of times required to
obtain the desired position.
4.
Longitudinal adjustment of seat
Lift the control bar and adjust to
the desired position.
5.
Adjustment of lumbar support
Turn the control and adjust to the
desired position.
6.
Heated seat controls
The heated seats only operate
when the engine is running. Seat consisting of a seat cushion, seat back and head restraint which can all be
adjusted for optimum driving comfort.
For your safety, do not drive with
the head restraints removed; they
must be in place and correctly
adjusted.
Page 65 of 340
III
63
COMFORT
FRONT SEATS
ELECTRIC ADJUSTMENTS
To adjust the electric seats, switch on the ignition or start the engine if the
vehicle has gone into economy mode.
Seat adjustments are also possible for a short period after opening one of the
front doors or switching off the ignition.
2.
Adjustment of the backrest angle
Move the control forwards or
backwards to adjust the backrest
angle.
3.
Adjustment of the angle of the
top of the backrest
Move the control forwards or
backwards to adjust the angle of
the top of the backrest.
1.
Adjustment of the seat height
and angle, and longitudinal
adjustment
)
Raise or lower the front of the
control to adjust the seat cushion
angle.
)
Raise or lower the rear of the
control to raise or lower the seat.
)
Simultaneously raise or lower
the front and rear of the control
in order to raise or lower the
entire seat.
4.
Adjustment of lumbar support
This function allows you to inde-
pendently adjust the height and
level of lumbar support.
Move the control:
)
Forwards or backwards to increase
or reduce the lumbar support.
)
Upwards or downwards to raise or
lower the lumbar support zone.
Head restraint height and
angle adjustments on electric
seats
)
To adjust the angle of the head
restraint, push back or pull for-
ward section C
of the head re-
straint until you reach the desired
position.
)
To raise it, pull upwards.
)
To lower it, press on the control D
to unlock it, and simultaneously
on the head restraint itself.
)
To remove it, press on the
control D
to unlock it, then pull it
upwards.
